Parting 1971 Suburban (NM) - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 03-07-2009, 07:10 PM

Quote:

Originally Posted by MrGoodpliers

I need one of the chromed plastic headliner bows. I like to use all push-in/bolt-on trim clips (ala 69-70) because they pull up nice and tight, unlike 71-72 that bulge and you see the tape. I'd be interested in all of them that you have.

Unfortunately all of the headliner and all of the bows are gone. I'll see how many of the clips I can come up with. Do you need the upper trim to?

sourkraut · 03-07-2009, 10:57 PM

sorry, will have to pass on gauges.

**Hart_Rod** · 03-09-2009, 08:31 AM

Quote:

Originally Posted by sourkraut

sorry, will have to pass on gauges.

No worries.

BTTT

NPilot1975 · 03-09-2009, 12:15 PM

Rob,

Found some pictures of what I need. It is the area of the inner cab where the sun visor mounts and the left side where upper fender mounts (the captured nut area.) I also need the entire dash, unbolted and the pinch welds drilled out at the windshield area. Let me know.

**Hart_Rod** · 03-09-2009, 08:48 PM

Quote:

Originally Posted by NPilot1975

Rob,

Found some pictures of what I need. It is the area of the inner cab where the sun visor mounts and the left side where upper fender mounts (the captured nut area.) I also need the entire dash, unbolted and the pinch welds drilled out at the windshield area. Let me know.

How 'bout I bring you this........

.
.

NPilot1975 · 03-09-2009, 08:57 PM

That looks about right. The cab is actually visually rust free. I will have to see once I start stripping it. How is the dash, is it AC? If you start cutting the burb up, I think the 2 patch panels I need would end up being pretty small.

**Hart_Rod** · 03-09-2009, 09:19 PM

Quote:

Originally Posted by NPilot1975

That looks about right. The cab is actually visually rust free. I will have to see once I start stripping it. How is the dash, is it AC? If you start cutting the burb up, I think the 2 patch panels I need would end up being pretty small.

Non ac dash. Radio has been cut for the new style radio. It will be easier for me to cut it across the rockers and roof. I can bring it when I come this fall.

**Hart_Rod** · 03-11-2009, 08:28 AM

bump

jorgensensc · 03-11-2009, 08:56 AM

sent you a PM.

**Hart_Rod** · 03-12-2009, 09:11 AM

bttt

hotrodmtodd · 03-12-2009, 10:48 PM

Yes Rob, thanks for asking. I could use the suicide knob on the steering wheel..........hehe I will wait to see whats left and clean up the scraps like I always do. Talk to you soon my friend, Mike

mdunn · 03-12-2009, 11:04 PM

Do you still have the rear hatch latches? I need the two that bolt to the side of the top for the rear hatch to latch to for my 72 Blazer. Thanks for your help.

**Hart_Rod** · 03-13-2009, 11:01 AM

Quote:

Originally Posted by hotrodmtodd

Yes Rob, thanks for asking. I could use the suicide knob on the steering wheel..........hehe I will wait to see whats left and clean up the scraps like I always do. Talk to you soon my friend, Mike

You saw that, huh?! That was the first thing I pulled off,

. I'm not sure if I'm going to use it yet, if I don't I'll let you know. I'm getting ready to start chopping the Burb up in a couple of weeks, so send me your wish list,

. Take care.

Quote:

Originally Posted by mdunn

Do you still have the rear hatch latches? I need the two that bolt to the side of the top for the rear hatch to latch to for my 72 Blazer. Thanks for your help.

Are you talking about 1 or 2? Let me know.
..
..

mdunn · 03-13-2009, 08:51 PM

Looks like the Burbs rear hatch mechanism is different than the Blazers. I was thinking they were the same. It would look something more like #2, but I can not see it that well. Sorry, maybe I am confused on the interchangability. Sorry for the confusion.

**Hart_Rod** · 03-13-2009, 09:06 PM

Quote:

Originally Posted by mdunn

Looks like the Burbs rear hatch mechanism is different than the Blazers. I was thinking they were the same. It would look something more like #2, but I can not see it that well. Sorry, maybe I am confused on the interchangability. Sorry for the confusion.

Here's a better picture:

.

vectorit · 03-14-2009, 12:39 PM

PM sent

mdunn · 03-14-2009, 07:12 PM

Thank you very much for the better picture. I can clearly see these are not the same as the Blazer. Thanks again for your time and help.

jeremiah king · 03-14-2009, 11:07 PM

Hi Im in need of a good set of rear door panels for 3rd door and ds rear non door. how are yours? shipping to 92025?

**Hart_Rod** · 03-15-2009, 09:01 AM

Quote:

Originally Posted by vectorit

PM sent

PM returned.

Quote:

Originally Posted by mdunn

Thank you very much for the better picture. I can clearly see these are not the same as the Blazer. Thanks again for your time and help.

No worries. I'm sure someone on the board has what you need.

Quote:

Originally Posted by jeremiah king

Hi Im in need of a good set of rear door panels for 3rd door and ds rear non door. how are yours? shipping to 92025?

Passenger side is good. Someone cut a 4" corner off of the drivers side,

. The part that is cut off is behind the seat and hard to see. Let me know.

**Hart_Rod** · 03-16-2009, 08:29 AM

ttt

Number98 · 03-16-2009, 02:44 PM

Just a friendly bump for ya Rob.......

ChuckDriver · 03-16-2009, 04:14 PM

Do you still have the rear wheel well inner tubs?

JJ

**Hart_Rod** · 03-16-2009, 05:22 PM

Quote:

Originally Posted by ChuckDriver

Do you still have the rear wheel well inner tubs?

JJ

Yes, what all do you need?

R/

ChuckDriver · 03-16-2009, 10:18 PM

Would like to get the inner wheel well that bolts to the floor. It can be cut from the outer at the factory seam. I want to use them to mini-tub my 57 short bed.
Thanks,
Johnny

**Hart_Rod** · 03-17-2009, 10:12 AM

Quote:

Originally Posted by ChuckDriver

Would like to get the inner wheel well that bolts to the floor. It can be cut from the outer at the factory seam. I want to use them to mini-tub my 57 short bed.
Thanks,
Johnny

PM sent.

03-07-2009, 10:57 PM	#52
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Parting 1971 Suburban (NM) sorry, will have to pass on gauges. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

03-09-2009, 12:15 PM	#54
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Parting 1971 Suburban (NM) Rob, Found some pictures of what I need. It is the area of the inner cab where the sun visor mounts and the left side where upper fender mounts (the captured nut area.) I also need the entire dash, unbolted and the pinch welds drilled out at the windshield area. Let me know. Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

03-09-2009, 08:57 PM	#56
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Parting 1971 Suburban (NM) That looks about right. The cab is actually visually rust free. I will have to see once I start stripping it. How is the dash, is it AC? If you start cutting the burb up, I think the 2 patch panels I need would end up being pretty small. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

03-11-2009, 08:28 AM	#58
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Parting 1971 Suburban (NM) bump __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-11-2009, 08:56 AM	#59
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Parting 1971 Suburban (NM) sent you a PM. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

03-12-2009, 09:11 AM	#60
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Parting 1971 Suburban (NM) bttt __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-12-2009, 10:48 PM	#61
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: Parting 1971 Suburban (NM) Yes Rob, thanks for asking. I could use the suicide knob on the steering wheel..........hehe I will wait to see whats left and clean up the scraps like I always do. Talk to you soon my friend, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

03-12-2009, 11:04 PM	#62
mdunn Registered User Join Date: Sep 2008 Location: Marysville, OH Posts: 119	Re: Parting 1971 Suburban (NM) Do you still have the rear hatch latches? I need the two that bolt to the side of the top for the rear hatch to latch to for my 72 Blazer. Thanks for your help. __________________ 1972 Blazer CST 4x4

03-13-2009, 08:51 PM	#64
mdunn Registered User Join Date: Sep 2008 Location: Marysville, OH Posts: 119	Re: Parting 1971 Suburban (NM) Looks like the Burbs rear hatch mechanism is different than the Blazers. I was thinking they were the same. It would look something more like #2, but I can not see it that well. Sorry, maybe I am confused on the interchangability. Sorry for the confusion. __________________ 1972 Blazer CST 4x4

03-14-2009, 12:39 PM	#66
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Parting 1971 Suburban (NM) PM sent __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

03-14-2009, 07:12 PM	#67
mdunn Registered User Join Date: Sep 2008 Location: Marysville, OH Posts: 119	Re: Parting 1971 Suburban (NM) Thank you very much for the better picture. I can clearly see these are not the same as the Blazer. Thanks again for your time and help. __________________ 1972 Blazer CST 4x4

03-14-2009, 11:07 PM	#68
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: Parting 1971 Suburban (NM) Hi Im in need of a good set of rear door panels for 3rd door and ds rear non door. how are yours? shipping to 92025?

03-16-2009, 08:29 AM	#70
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Parting 1971 Suburban (NM) ttt __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-16-2009, 02:44 PM	#71
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: Parting 1971 Suburban (NM) Just a friendly bump for ya Rob.......

03-16-2009, 04:14 PM	#72
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Parting 1971 Suburban (NM) Do you still have the rear wheel well inner tubs? JJ



Register or Log In To remove these advertisements.

03-16-2009, 10:18 PM	#74
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Parting 1971 Suburban (NM) Would like to get the inner wheel well that bolts to the floor. It can be cut from the outer at the factory seam. I want to use them to mini-tub my 57 short bed. Thanks, Johnny

Register or Log In To remove these advertisements.