What HEI Ignition to get? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 08-20-2009, 07:44 PM

Im running one of his dizzys in the 56 and it seems to run really well..

PHOENIX · 09-21-2009, 02:19 PM

I'm considering this Skip White distributor for my 1983 C10.
http://cgi.ebay.com/ebaymotors/SBC-B...QQcmdZViewItem

Sounds like everyone has nothing but good things to say about them. I've had bad luck with distributors. I had the weight pins on a Proform come apart on me and now my MSD pro-billet is acting strange. Don't really want to spend too much money right now.

How many miles you guys have on these Skip White units?
Anyone had to do a warranty claim with him?

Has anyone purchased his plug wires?
http://cgi.ebay.com/ebaymotors/SPARK...d=p3911.c0.m14

Thanks!

FRENCHBLUE72 · 09-21-2009, 08:28 PM

I have a skip white dizzy and it works real well.

PHOENIX · 09-21-2009, 08:38 PM

Quote:

Originally Posted by FRENCHBLUE72

I have a skip white dizzy and it works real well.

How many miles do you have on it?

*vegaschevy* · 09-22-2009, 04:51 AM

Quote:

Originally Posted by PHOENIX

How many miles do you have on it?

I bought his wires and dizzy. Ill have her running shortly

PHOENIX · 10-27-2009, 03:24 PM

I've been running the Skip White Distributor for about a month now. So far so good. Everything looks and works great. Lifetime warranty too. We'll see how well it lasts.

Rack Man · 10-27-2009, 06:29 PM

On my my straight dumps I couldn't find a good way to route the front plug wires behind the manifiolds so I used a couple clips that came with my plug wire retainer kit that I got from LMC....just bolted it to the frame...well away from the manifolds...Not 100% factory but it does the job!

msgross · 10-27-2009, 08:39 PM

The only issue I noticed with the skip white HEI compared to my GMPP HEI is that it didn't spin as "freely" as the GMPP. It was like good vs. ok bearings... for the price it would still make a good choice for an average motor.

evilways · 10-27-2009, 08:46 PM

I have to put in my 2 cents on the skip white ones, VetteVet told me about them and I have had mine in my 283 for a couple of months now and no problems with it at all. Napa wanted like $60 for a new coil and I got the skip white one for $45 so you can't beat it.

tim21391 · 10-27-2009, 09:10 PM

im running accel dizzy with msd cap and rotor

08-20-2009, 07:44 PM	#51
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: What HEI Ignition to get? Im running one of his dizzys in the 56 and it seems to run really well.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-21-2009, 02:19 PM	#52
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Re: What HEI Ignition to get? I'm considering this Skip White distributor for my 1983 C10. http://cgi.ebay.com/ebaymotors/SBC-B...QQcmdZViewItem Sounds like everyone has nothing but good things to say about them. I've had bad luck with distributors. I had the weight pins on a Proform come apart on me and now my MSD pro-billet is acting strange. Don't really want to spend too much money right now. How many miles you guys have on these Skip White units? Anyone had to do a warranty claim with him? Has anyone purchased his plug wires? http://cgi.ebay.com/ebaymotors/SPARK...d=p3911.c0.m14 Thanks! __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION * Last edited by PHOENIX; 09-21-2009 at 02:23 PM.

09-21-2009, 08:28 PM	#53
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: What HEI Ignition to get? I have a skip white dizzy and it works real well. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-27-2009, 03:24 PM	#56
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Re: What HEI Ignition to get? I've been running the Skip White Distributor for about a month now. So far so good. Everything looks and works great. Lifetime warranty too. We'll see how well it lasts. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

10-27-2009, 06:29 PM	#57
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: What HEI Ignition to get? On my my straight dumps I couldn't find a good way to route the front plug wires behind the manifiolds so I used a couple clips that came with my plug wire retainer kit that I got from LMC....just bolted it to the frame...well away from the manifolds...Not 100% factory but it does the job! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

10-27-2009, 08:39 PM	#58
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: What HEI Ignition to get? The only issue I noticed with the skip white HEI compared to my GMPP HEI is that it didn't spin as "freely" as the GMPP. It was like good vs. ok bearings... for the price it would still make a good choice for an average motor. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-27-2009, 08:46 PM	#59
evilways Registered User Join Date: Mar 2008 Location: Lafayette, IN Posts: 226	Re: What HEI Ignition to get? I have to put in my 2 cents on the skip white ones, VetteVet told me about them and I have had mine in my 283 for a couple of months now and no problems with it at all. Napa wanted like $60 for a new coil and I got the skip white one for $45 so you can't beat it. __________________ Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project

10-27-2009, 09:10 PM	#60
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: What HEI Ignition to get? im running accel dizzy with msd cap and rotor __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.