"Gone in 60 days, project 50th BB Shop Truck " - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 07-13-2009, 11:56 AM

Quote:

Originally Posted by gcburdic

So how would you grease these??...did you move the grease zirk and change the fitting?...I think it's a great idea!

I greased them with some good "poly lube" before I put them on. I think they should be fine. If not, I'll swap the bar back to the other side. With a 2" drop, it doesn't really hang that low anyway.

Also, I can't believe someone hasn't pointed out the mistake I made on the rear yet........

......

.

R/

LOW DOUGH · 07-13-2009, 12:11 PM

mistake??? You didn't put on the diff cover??? or maybe (from what it looks like in the pic) you haven't bolted the lower shock mounts all the way on?? Or am I missing it?

EDIT: Or maybe no bump stops

LOW DOUGH · 07-13-2009, 12:14 PM

Or what about... no brake lines? But, that could be that you just havn't goten to that yet.

As you can see.. I am wishing I could just point it out like I know what it is. HAHAHA

LOW DOUGH · 07-13-2009, 12:16 PM

But, If we are talking about the "rear" of the sway bar I would say they arn't bolted down all the way at the control arm. Closest to the wheel.

gcburdic · 07-13-2009, 12:21 PM

Ohhhh...I wanna play!!!....Is it that you flipped the trailing arms??...Ebrake cables are on the inside?!?!....Also, this is just nit picking, but a filter on that pumpkin breather tube!!!LOL

Ding, ding ding....I think I win a newly restored 50th clone!!!wooohoooo

LOW DOUGH · 07-13-2009, 12:40 PM

Or you forgot the lowering blocks..

Maybe you didn't mean to put bald tires on it. HAHA

Oh, you fogot the drive shaft that would go to a trans that's not there.

I'm reachin'

LOW DOUGH · 07-13-2009, 12:44 PM

How bout this....

you left the bed off. LOL

**Hart_Rod** · 07-13-2009, 01:06 PM

[quote=LOW DOUGH;3409752]Or what about... no brake lines? But, that could be that you just havn't goten to that yet.

Quote:

Originally Posted by LOW DOUGH

Or you forgot the lowering blocks..

As you can see.. I am wishing I could just point it out like I know what it is. HAHAHA

Maybe you didn't mean to put bald tires on it. HAHA

Oh, you fogot the drive shaft that would go to a trans that's not there.

I'm reachin'

Good guesses, but.........

Quote:

Originally Posted by gcburdic

Ohhhh...I wanna play!!!....Is it that you flipped the trailing arms??...Ebrake cables are on the inside?!?!....Also, this is just nit picking, but a filter on that pumpkin breather tube!!!LOL

Ding, ding ding....I think I win a newly restored 50th clone!!!wooohoooo

We have a winner!!! You're prize is in the mail, a 10% coupon off of said clone,

.....

. I got in a hurry and put the trailing arms on the wrong side,

. Not really a big deal, as I'm not leaving these ones on here anyway. I just hate doing dumb stuff like that,

.

R/

gcburdic · 07-13-2009, 03:15 PM

Boy Low Dough....you WERE really reaching!!!LOL.....all very good guesses...or maybe you were trying to increase your post count!!!LOL....

Nice...10% off coupon....ummmm...now let me see if I can find anything else!!!hahaha

LOW DOUGH · 07-13-2009, 03:26 PM

I was really guessing

**Hart_Rod** · 07-13-2009, 11:52 PM

Quote:

Originally Posted by gcburdic

Nice...10% off coupon....ummmm...now let me see if I can find anything else!!!hahaha

How about free shipping to Pensacola........

.

gcburdic · 07-14-2009, 07:37 AM

That seems like the best deal going!!!....Then it'll only be 580 miles from me instead of 1600!!!LOL

Any more progress??...I mean you must be all packed by now, so you must have time to work on the truck alot, right?!?!LOL

**Hart_Rod** · 07-14-2009, 09:20 PM

Quote:

Originally Posted by gcburdic

That seems like the best deal going!!!....Then it'll only be 580 miles from me instead of 1600!!!LOL

Any more progress??...I mean you must be all packed by now, so you must have time to work on the truck alot, right?!?!LOL

Maybe.......check this out......how about a little steppin'?

gcburdic · 07-14-2009, 09:37 PM

ummmm...interesting....looks like the same color....did they make 50th steppers??....Personally I like fleet's better, but would be interested in seeing this on the frame.....

**Hart_Rod** · 07-14-2009, 09:45 PM

Quote:

Originally Posted by gcburdic

ummmm...interesting....looks like the same color....did they make 50th steppers??....Personally I like fleet's better, but would be interested in seeing this on the frame.....

http://www.67-72chevytrucks.com/vboa...=stepside+50th

http://www.67-72chevytrucks.com/vboa...=stepside+50th

gcburdic · 07-14-2009, 10:24 PM

GULP!!!!......uh oh!!!LOL

gcburdic · 07-15-2009, 09:40 AM

So are you gonna paint the front clip and cab solid gold or paint the white at the bottom of the stepper??.....I really like the looks of the 50th clone stepper!!!!...your vision on this thing is getting clearer and clearer....

And I thought this was my little secret!!!....you're advertising this thing all over the board!!!LOL

**Hart_Rod** · 07-15-2009, 09:46 AM

Quote:

Originally Posted by gcburdic

So are you gonna paint the front clip and cab solid gold or paint the white at the bottom of the stepper??.....I really like the looks of the 50th clone stepper!!!!...your vision on this thing is getting clearer and clearer....

And I thought this was my little secret!!!....you're advertising this thing all over the board!!!LOL

I was thinking white on the stepper bed (just the lower part of the fenders), but haven't really made up my mind yet, but a 68 50th BB stepper would definitely be unique and rare,

. I still haven't bought the bed yet, because I was leaning towards SWB. Just say you want it, and I'll quit posting pictures,

.

FRENCHBLUE72 · 07-15-2009, 09:56 AM

Hurry up and get her done times a wastin....

gcburdic · 07-15-2009, 12:19 PM

Quote:

Originally Posted by Hart_Rod

I was thinking white on the stepper bed (just the lower part of the fenders), but haven't really made up my mind yet, but a 68 50th BB stepper would definitely be unique and rare,

. I still haven't bought the bed yet, because I was leaning towards SWB. Just say you want it, and I'll quit posting pictures,

.

Cool...I think that white on the stepper would look good if you go that direction...maybe have someone photoshop it for ya (us!!

)........indeed a very rare and unique well optioned truck....but I'm with you on the SWB too...
Ugh....I....I....I.....oh crap, my wife is calling....I'll be back!!!

**Hart_Rod** · 07-16-2009, 09:29 AM

Check this out.............

killer71 · 07-16-2009, 10:28 AM

3 tone...lol

LOW DOUGH · 07-16-2009, 10:40 AM

is that photoshop?

**Hart_Rod** · 07-16-2009, 10:47 AM

Quote:

Originally Posted by killer71

3 tone...lol

Quote:

Originally Posted by LOW DOUGH

is that photoshop?

Yes, what do you think?

LOW DOUGH · 07-16-2009, 11:40 AM

Not bad. The only thing that gets me is no trim. If you ran trim, what would you do for the bed?

EDIT: But, if you ran trim you praobly wouldn't go over the wheel weels.

07-13-2009, 12:11 PM	#52
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. mistake??? You didn't put on the diff cover??? or maybe (from what it looks like in the pic) you haven't bolted the lower shock mounts all the way on?? Or am I missing it? EDIT: Or maybe no bump stops Last edited by LOW DOUGH; 07-13-2009 at 12:12 PM.

07-13-2009, 12:14 PM	#53
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. Or what about... no brake lines? But, that could be that you just havn't goten to that yet. As you can see.. I am wishing I could just point it out like I know what it is. HAHAHA

07-13-2009, 12:16 PM	#54
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. But, If we are talking about the "rear" of the sway bar I would say they arn't bolted down all the way at the control arm. Closest to the wheel.

07-13-2009, 12:21 PM	#55
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Question on 50th production numbers.. Ohhhh...I wanna play!!!....Is it that you flipped the trailing arms??...Ebrake cables are on the inside?!?!....Also, this is just nit picking, but a filter on that pumpkin breather tube!!!LOL Ding, ding ding....I think I win a newly restored 50th clone!!!wooohoooo __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 07-13-2009 at 12:31 PM.

07-13-2009, 12:40 PM	#56
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. Or you forgot the lowering blocks.. Maybe you didn't mean to put bald tires on it. HAHA Oh, you fogot the drive shaft that would go to a trans that's not there. I'm reachin'

07-13-2009, 12:44 PM	#57
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. How bout this.... you left the bed off. LOL

07-13-2009, 03:15 PM	#59
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Question on 50th production numbers.. Boy Low Dough....you WERE really reaching!!!LOL.....all very good guesses...or maybe you were trying to increase your post count!!!LOL.... Nice...10% off coupon....ummmm...now let me see if I can find anything else!!!hahaha __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

07-13-2009, 03:26 PM	#60
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. I was really guessing

07-14-2009, 07:37 AM	#62
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Question on 50th production numbers.. That seems like the best deal going!!!....Then it'll only be 580 miles from me instead of 1600!!!LOL Any more progress??...I mean you must be all packed by now, so you must have time to work on the truck alot, right?!?!LOL __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 07-14-2009 at 08:02 AM.

07-14-2009, 09:37 PM	#64
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Question on 50th production numbers.. ummmm...interesting....looks like the same color....did they make 50th steppers??....Personally I like fleet's better, but would be interested in seeing this on the frame..... __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

07-14-2009, 10:24 PM	#66
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Question on 50th production numbers.. GULP!!!!......uh oh!!!LOL __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 07-15-2009 at 09:40 AM.

07-15-2009, 09:40 AM	#67
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Question on 50th production numbers.. So are you gonna paint the front clip and cab solid gold or paint the white at the bottom of the stepper??.....I really like the looks of the 50th clone stepper!!!!...your vision on this thing is getting clearer and clearer.... And I thought this was my little secret!!!....you're advertising this thing all over the board!!!LOL __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

07-15-2009, 09:56 AM	#69
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Question on 50th production numbers.. Hurry up and get her done times a wastin.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-16-2009, 09:29 AM	#71
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Question on 50th production numbers.. Check this out............. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-16-2009, 10:28 AM	#72
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Question on 50th production numbers.. 3 tone...lol __________________ R.I.P. Killer 71 10/26/07



Register or Log In To remove these advertisements.

07-16-2009, 10:40 AM	#73
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. is that photoshop?

07-16-2009, 11:40 AM	#75
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Question on 50th production numbers.. Not bad. The only thing that gets me is no trim. If you ran trim, what would you do for the bed? EDIT: But, if you ran trim you praobly wouldn't go over the wheel weels. Last edited by LOW DOUGH; 07-16-2009 at 11:41 AM.

Register or Log In To remove these advertisements.