Parting out 1967 GMC LWB Fleet 1/2 Ton - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sinisterspeed · 07-08-2009, 02:25 PM

Chastur, Just decided i am not going to rebuild the motor, might have it sold as is this afternoon. So, I will keep the carburator which was just recently rebuilt (according to the guy i bought the truck from) and if you like will give you carb and all linkage for 30.00 shipped. Sending PM as well.

ChaStur · 07-08-2009, 06:57 PM

Very generous offer but I have to pass. I really just need the last 3 or 4" rod that connects carb to the rest of the linkage but I totally understand if you don't want to seperate.

Thanks!

Sinisterspeed · 07-08-2009, 07:04 PM

Okay, thanks for letting me know, i'd rather not destroy the carrb, if nobody wants it i'll get back to and see if you still need the pieces.
Thanks, Charles

Quote:

Originally Posted by ChaStur

Very generous offer but I have to pass. I really just need the last 3 or 4" rod that connects carb to the rest of the linkage but I totally understand if you don't want to seperate.

Thanks!

glimmertwin01 · 07-08-2009, 08:55 PM

CPNE sorry dude didnt see you had dibs on mirror but il take it if you dont..

Sinister I PMed you with my email etc... i need a price bro... and thank the wife....

Sinisterspeed · 07-08-2009, 10:38 PM

Quote:

Originally Posted by ChaStur

Very generous offer but I have to pass. I really just need the last 3 or 4" rod that connects carb to the rest of the linkage but I totally understand if you don't want to seperate.

Thanks!

I guess maybe I didn't understand what you needed. The way I understood it.

It was #1 in this picture. and that is part of the carb itself.

any one of #2-4 is fair game. Let me know if its one of those you need.

howard_m18 · 07-09-2009, 12:54 AM

I'm looking for a drive shaft for my 67 LWB. Would yours work & if you haqve it, how much to 48348,MI

Sinisterspeed · 07-09-2009, 08:01 PM

Quote:

Originally Posted by howard_m18

I'm looking for a drive shaft for my 67 LWB. Would yours work & if you haqve it, how much to 48348,MI

What trans does yours have?

I'm not sure what interchanges. This one has a 4sp.

Can you measure yours or where yours goes? I will measure this one for ya.

I'm going outside to remove that drive shaft and rear springs right now.

howard_m18 · 07-09-2009, 08:21 PM

I have a 700 trans in mine. The engine is on a stand so I will have to do some math & swag it as far as length. Thanks, Howard

howard_m18 · 07-09-2009, 08:25 PM

Robert,do you have the power steering pump? Howard

Sinisterspeed · 07-09-2009, 10:45 PM

Quote:

Originally Posted by howard_m18

Robert,do you have the power steering pump? Howard

Sorry Howard, it was a Manual.

Sinisterspeed · 07-09-2009, 11:09 PM

Quote:

Originally Posted by 10pointgmc

how much for the leaf springs shipped to 47032

I think about the cheapest I could get them to you is 150.00 shipped. Looks like 115 shipping +/-

They are 60 lbs each.

69.00 each to ship or 114 if i wrap them together

Sinisterspeed · 07-10-2009, 01:18 PM

Leaving today for the weekend. I will be going by Greyhound to ship a couple larger items. If there is any other large items to go let me know asap. I will check this thread again before I pull out.

Thanks,
Charles

Elephanthead · 07-13-2009, 10:48 AM

Got the steering gear in two days, installed it and no more looking like I am a drunk driver going down the road, it was even full of clean looking grease! Thanks for the part.

Sinisterspeed · 07-13-2009, 08:24 PM

Quote:

Originally Posted by Elephanthead

Got the steering gear in two days, installed it and no more looking like I am a drunk driver going down the road, it was even full of clean looking grease! Thanks for the part.

Cool, glad you got it so quik! Do you have it installed already?

Sinisterspeed · 07-15-2009, 09:27 PM

Bump for Thursday. Lots of good parts left!

Wilson_ · 07-16-2009, 04:45 AM

Shipping on the grill to 95404?

Thanks

glimmertwin01 · 07-16-2009, 06:21 AM

Charles
sent the PP thismorning bro... now waiting for Greyhound

Sinisterspeed · 07-16-2009, 07:45 AM

Quote:

Originally Posted by Wilson_

Shipping on the grill to 95404?

Thanks

Shipping looks like it would be 75.00

**CPNE** · 07-16-2009, 08:57 AM

Quote:

Originally Posted by Sinisterspeed

Bump for Thursday. Lots of good parts left!

I can vouch for these parts, mine came in and I'm happy

nicks05z71 · 07-16-2009, 10:34 AM

interested in

Ext Door handles ---- 25.oo Pair SHIPPED
Headlight/Wiper Switches 10.oo SHIPPED

could I get a closer pic of the door handles?

Buckeye1 · 07-16-2009, 09:44 PM

Is the under dash harness still available?

Sinisterspeed · 07-16-2009, 10:39 PM

Quote:

Originally Posted by nicks05z71

interested in

Ext Door handles ---- 25.oo Pair SHIPPED
Headlight/Wiper Switches 10.oo SHIPPED

could I get a closer pic of the door handles?

Sure, I will get you a pic in the morning if you like. They are OEM, Looks like they have alittle bit of wrattle can white overspray on one of em. I'll clean em up before I send em of course. No rust at all!! Switches are still there. Let me know if you need the 67 Knobs too. Cause if you dont I'll keep em.

Quote:

Originally Posted by Buckeye1

Is the under dash harness still available?

Yes it is, If you didn't see in the earlier pics. This is a guage truck w/o AC. The harness looks to be completely untouched.

Sinisterspeed · 07-16-2009, 10:42 PM

Quote:

Originally Posted by CPNE

I can vouch for these parts, mine came in and I'm happy

Thanks CPNE!! I'm glad you are happy with 'em Let me know if there is anything else you are looking for. I have some other stuff from other trucks I haven't listed as of yet. Mostly 69-72 stuff though.

nicks05z71 · 07-16-2009, 11:35 PM

Quote:

Originally Posted by Sinisterspeed

Sure, I will get you a pic in the morning if you like. They are OEM, Looks like they have alittle bit of wrattle can white overspray on one of em. I'll clean em up before I send em of course. No rust at all!! Switches are still there. Let me know if you need the 67 Knobs too. Cause if you dont I'll keep em.

pic would be great, thanks!

unclebrad · 07-17-2009, 12:51 PM

How does the exhaust manifold look? I am looking for the intake and exhaust mainfold still bolted together so that I can just bolt it onto my engine and go. (Just got to get her running.) Would you consider selling them seperately from the engine??

07-08-2009, 02:25 PM	#51
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Chastur, Just decided i am not going to rebuild the motor, might have it sold as is this afternoon. So, I will keep the carburator which was just recently rebuilt (according to the guy i bought the truck from) and if you like will give you carb and all linkage for 30.00 shipped. Sending PM as well. __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

07-08-2009, 06:57 PM	#52
ChaStur Registered User Join Date: Sep 2008 Location: Duluth, MN Posts: 111	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Very generous offer but I have to pass. I really just need the last 3 or 4" rod that connects carb to the rest of the linkage but I totally understand if you don't want to seperate. Thanks!

07-08-2009, 08:55 PM	#54
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton CPNE sorry dude didnt see you had dibs on mirror but il take it if you dont.. Sinister I PMed you with my email etc... i need a price bro... and thank the wife.... __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-09-2009, 12:54 AM	#56
howard_m18 Registered User Join Date: Mar 2009 Location: clarkston,MI Posts: 217	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton I'm looking for a drive shaft for my 67 LWB. Would yours work & if you haqve it, how much to 48348,MI

07-09-2009, 08:21 PM	#58
howard_m18 Registered User Join Date: Mar 2009 Location: clarkston,MI Posts: 217	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton I have a 700 trans in mine. The engine is on a stand so I will have to do some math & swag it as far as length. Thanks, Howard

07-09-2009, 08:25 PM	#59
howard_m18 Registered User Join Date: Mar 2009 Location: clarkston,MI Posts: 217	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Robert,do you have the power steering pump? Howard

07-10-2009, 01:18 PM	#62
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Leaving today for the weekend. I will be going by Greyhound to ship a couple larger items. If there is any other large items to go let me know asap. I will check this thread again before I pull out. Thanks, Charles __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

07-13-2009, 10:48 AM	#63
Elephanthead Registered User Join Date: Nov 2008 Location: Carmel, IN Posts: 187	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Got the steering gear in two days, installed it and no more looking like I am a drunk driver going down the road, it was even full of clean looking grease! Thanks for the part.

07-15-2009, 09:27 PM	#65
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Bump for Thursday. Lots of good parts left! __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

07-16-2009, 04:45 AM	#66
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Shipping on the grill to 95404? Thanks __________________ Northern California Group Met list: Cyclone, KCJones, TranzAm, extd56, hotrodhomi, mnky30, Rokcrln, Brad, JerryJones, Petey-pablo, 72Subby

07-16-2009, 06:21 AM	#67
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Charles sent the PP thismorning bro... now waiting for Greyhound __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

07-16-2009, 10:34 AM	#70
nicks05z71 Registered User Join Date: Sep 2008 Location: Willard,Ohio Posts: 87	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton interested in Ext Door handles ---- 25.oo Pair SHIPPED Headlight/Wiper Switches 10.oo SHIPPED could I get a closer pic of the door handles?

07-16-2009, 09:44 PM	#71
Buckeye1 Registered User Join Date: Jun 2009 Location: Lunenburg, MA Posts: 2	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Is the under dash harness still available?

07-17-2009, 12:51 PM	#75
unclebrad Registered User Join Date: Jul 2009 Location: Concord, CA Posts: 149	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton How does the exhaust manifold look? I am looking for the intake and exhaust mainfold still bolted together so that I can just bolt it onto my engine and go. (Just got to get her running.) Would you consider selling them seperately from the engine??



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.