Wood in a 72 Cheyenne Super - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 11-04-2009, 01:59 PM

I have a 72 Super. Ochre with the parchment interior. It originally came with a black dash pad, black seatbelts, and black A/C outlets. So Trevor, you are not crazy.

clos69 · 11-04-2009, 02:29 PM

Those look nice Gold.....but keep an eye out for the dash bezel.....I bought one from Gary for my blazer and started peeling off around the edges. I spent over $80 for it and I was not happy to see that.

**leddzepp** · 11-04-2009, 02:34 PM

I am going to sand down the ridges on my aftermarket cluster face, and hope this will help the woodgrain decal adhere to it better.

100gold · 11-04-2009, 02:40 PM

Clos69,
Thanks for the heads up. I would imagine though that he would take care of that for you.

That's my impression of him anyways. You might call him and see what he has to say.

He did say that he had had some issues with that and had finally found a supplier of bezels that have got a better surface now.

**JJanzen** · 11-04-2009, 02:55 PM

Leddzepp, before you sand down your bezel, you might try applying your vinyl woodgrain piece to a film adhesive such as 3M 467. It comes in wide rolls, up to 24" wide so you could do it in one piece. It is a non dimensional film adhesive that really sticks and would definately stick to the pebbled surface of a gauge cluster. Google that number and see if you can find someone in your area that has some and try to buy just what you need from them....I don't think you want a whole roll of it. Secondly, a lot of these appliques need to be burnished down to release the adhesive on them. They do this so you can re-position them in case you screw up laying it down the first time. Lastly, Gary/Super Cheyenne Man told me that some of the earlier vinyls he used didn't have long shelf lives and they shrunk considerably and released when applied. He now is only using
3M products and hasn't had any problems that I am aware of. Good luck and let us know your results when your done.

Joel

**71blksuper4x4** · 11-04-2009, 03:05 PM

Those look good, but I am going to buy some of a roll and do it myself, as I have seen the proper way to lay it down, and I will know it's done right. Nothing against Gary's work at all because it really does look the part. Also, the gauge bezel as I have stated is thicker than the 3m di-noc samples that I got in the mail. They are almost a thin plastic material that possibly the di-noc is applied to. I am going to try a couple different ways to acheive a woodgrain cluster that doesn't peel up or shrink like mine have in the past. Trevor

clos69 · 11-04-2009, 03:35 PM

Quote:

Originally Posted by 100gold

Clos69,
Thanks for the heads up. I would imagine though that he would take care of that for you.

That's my impression of him anyways. You might call him and see what he has to say.

He did say that he had had some issues with that and had finally found a supplier of bezels that have got a better surface now.

Yeah he is a good guy to deal with and knows his stuff....He did say i could return it if i had any problems with it.....I guess mine being a blazer with the top off sitting in the sun adds to the problem.

100gold · 11-04-2009, 04:56 PM

Yeppers, I'd think that would be hard on everything in the interior.

You bring up a point though. With this kind of an interior restoration this truck is going to have to have deep tinted glass and one of those funky widow shade thingys for the windshield.

I'm building it as driver but it sure is hard not to think of it as show queen as you do the work.

powell72 · 11-04-2009, 06:12 PM

All that stuff looks great, those are the first close-up pics I've seen of Gary's work.

**72 Super** · 11-04-2009, 08:40 PM

Those pieces look outstanding. Gary does excellent work, he restored my vent window assemblies.

Ray

100gold · 11-04-2009, 09:01 PM

72 Super,
I'd like to see some mor pics of your truck. Your avatar whetted my appetite.

Got a link or anything?

**71blksuper4x4** · 11-04-2009, 09:53 PM

Though this is a truck site, I must say his Chevelle is the real attention getter

. Trevor

**72 Super** · 11-05-2009, 08:55 PM

100gold,My 72 is in pieces now, the picture in my avator was taken approx 10 years ago, unfortunately the only ones I have on my computer are with the new sheet metal test fitted. I need to dig out my old pictures and scan them.

Trevor, did I show you a pic of my Chevelle?

Ray

**71blksuper4x4** · 11-06-2009, 05:02 AM

Ray, I seen pics of it years and years ago. Cranberry Red correct? Trevor

**Dieselwrencher** · 11-06-2009, 06:52 PM

100gold, those pieces look absolutely amazing! And if that was done for the 5 bills I'm thinking, 2 zeros, that seems like a really good deal.

11-04-2009, 01:59 PM	#51
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,037	Re: Wood in a 72 Cheyenne Super I have a 72 Super. Ochre with the parchment interior. It originally came with a black dash pad, black seatbelts, and black A/C outlets. So Trevor, you are not crazy. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-04-2009, 02:29 PM	#52
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Wood in a 72 Cheyenne Super Those look nice Gold.....but keep an eye out for the dash bezel.....I bought one from Gary for my blazer and started peeling off around the edges. I spent over $80 for it and I was not happy to see that. __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

11-04-2009, 02:34 PM	#53
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,037	Re: Wood in a 72 Cheyenne Super I am going to sand down the ridges on my aftermarket cluster face, and hope this will help the woodgrain decal adhere to it better. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-04-2009, 02:40 PM	#54
100gold Registered User Join Date: May 2009 Location: Weiser,Idaho Posts: 234	Re: Wood in a 72 Cheyenne Super Clos69, Thanks for the heads up. I would imagine though that he would take care of that for you. That's my impression of him anyways. You might call him and see what he has to say. He did say that he had had some issues with that and had finally found a supplier of bezels that have got a better surface now.

11-04-2009, 02:55 PM	#55
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	Re: Wood in a 72 Cheyenne Super Leddzepp, before you sand down your bezel, you might try applying your vinyl woodgrain piece to a film adhesive such as 3M 467. It comes in wide rolls, up to 24" wide so you could do it in one piece. It is a non dimensional film adhesive that really sticks and would definately stick to the pebbled surface of a gauge cluster. Google that number and see if you can find someone in your area that has some and try to buy just what you need from them....I don't think you want a whole roll of it. Secondly, a lot of these appliques need to be burnished down to release the adhesive on them. They do this so you can re-position them in case you screw up laying it down the first time. Lastly, Gary/Super Cheyenne Man told me that some of the earlier vinyls he used didn't have long shelf lives and they shrunk considerably and released when applied. He now is only using 3M products and hasn't had any problems that I am aware of. Good luck and let us know your results when your done. Joel __________________ Blue72 Red72

11-04-2009, 03:05 PM	#56
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Wood in a 72 Cheyenne Super Those look good, but I am going to buy some of a roll and do it myself, as I have seen the proper way to lay it down, and I will know it's done right. Nothing against Gary's work at all because it really does look the part. Also, the gauge bezel as I have stated is thicker than the 3m di-noc samples that I got in the mail. They are almost a thin plastic material that possibly the di-noc is applied to. I am going to try a couple different ways to acheive a woodgrain cluster that doesn't peel up or shrink like mine have in the past. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-04-2009, 04:56 PM	#58
100gold Registered User Join Date: May 2009 Location: Weiser,Idaho Posts: 234	Re: Wood in a 72 Cheyenne Super Yeppers, I'd think that would be hard on everything in the interior. You bring up a point though. With this kind of an interior restoration this truck is going to have to have deep tinted glass and one of those funky widow shade thingys for the windshield. I'm building it as driver but it sure is hard not to think of it as show queen as you do the work.

11-04-2009, 06:12 PM	#59
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Wood in a 72 Cheyenne Super All that stuff looks great, those are the first close-up pics I've seen of Gary's work. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html Last edited by powell72; 11-04-2009 at 06:13 PM.

11-04-2009, 08:40 PM	#60
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Wood in a 72 Cheyenne Super Those pieces look outstanding. Gary does excellent work, he restored my vent window assemblies. Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

11-04-2009, 09:01 PM	#61
100gold Registered User Join Date: May 2009 Location: Weiser,Idaho Posts: 234	Re: Wood in a 72 Cheyenne Super 72 Super, I'd like to see some mor pics of your truck. Your avatar whetted my appetite. Got a link or anything?

11-04-2009, 09:53 PM	#62
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Wood in a 72 Cheyenne Super Though this is a truck site, I must say his Chevelle is the real attention getter . Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-05-2009, 08:55 PM	#63
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: Wood in a 72 Cheyenne Super 100gold,My 72 is in pieces now, the picture in my avator was taken approx 10 years ago, unfortunately the only ones I have on my computer are with the new sheet metal test fitted. I need to dig out my old pictures and scan them. Trevor, did I show you a pic of my Chevelle? Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

11-06-2009, 05:02 AM	#64
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Wood in a 72 Cheyenne Super Ray, I seen pics of it years and years ago. Cranberry Red correct? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-06-2009, 06:52 PM	#65
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Wood in a 72 Cheyenne Super 100gold, those pieces look absolutely amazing! And if that was done for the 5 bills I'm thinking, 2 zeros, that seems like a really good deal. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.