MS Parting Out 72 Blazer - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1sik52* · 10-22-2009, 01:20 PM

Quote:

Originally Posted by HuggerCST

Is the RF fender a GM fender? Any pics?

Yes, its a GM fender. I will send you a pic

JimmyFloyd · 10-22-2009, 04:05 PM

I need a couple random patches.

I beed one on the inner bed side, by the floor between the door and the wheel well on the driver's side. I also could use the center section of the windshield frame if it is decent (8-12" centered where the mirror would be)

Might need a couple other parts, but that's all I can think of for now. Might consider the under-dash wiring harness if it originally came with gauges.

*1sik52* · 10-22-2009, 04:30 PM

Quote:

Originally Posted by JimmyFloyd

I need a couple random patches.

I beed one on the inner bed side, by the floor between the door and the wheel well on the driver's side. I also could use the center section of the windshield frame if it is decent (8-12" centered where the mirror would be)

Might need a couple other parts, but that's all I can think of for now. Might consider the under-dash wiring harness if it originally came with gauges.

The inner bedside is good.
The windshield frame is toast along with under dash wiring

*1sik52* · 10-22-2009, 07:32 PM

Updated

**WIDESIDE72** · 10-22-2009, 07:40 PM

Is the tilt wheel sold? How about the aluminum grille surround and / or plastic grill insert? Price and condition, as well as shipping to Leander Tx 78641

*1sik52* · 10-22-2009, 07:45 PM

Quote:

Originally Posted by WIDESIDE72

Is the tilt wheel sold? How about the aluminum grille surround and / or plastic grill insert? Price and condition, as well as shipping to Leander Tx 78641

Tilt is Pending. Someone has paid deposit and mailing balance to me.

Dont have any of the Grille

Sorry

budder71 · 10-22-2009, 07:51 PM

I am for SURE going to take the front bucket seats, rear seat, and all hardware to accompany them and the vent window assemblies.. if no one has sent money on the roll bar I will take it as well.. just send me a pm with a total breakdown and total cost and I will send money for everything today if you like and if not I will be down no later than next Tuesday to pick it all up.. thanks again !!!!

*1sik52* · 10-22-2009, 07:55 PM

Quote:

Originally Posted by budder71

I am for SURE going to take the front bucket seats, rear seat, and all hardware to accompany them and the vent window assemblies.. if no one has sent money on the roll bar I will take it as well.. just send me a pm with a total breakdown and total cost and I will send money for everything today if you like and if not I will be down no later than next Tuesday to pick it all up.. thanks again !!!!

Youre good George. Im holding it for you

*1sik52* · 10-23-2009, 02:29 PM

Updated

*1sik52* · 10-23-2009, 09:22 PM

Im putting the wire harness from the fuse block to the blazer top back up for sale if anyone wants it.

budder71 · 10-23-2009, 11:04 PM

hold it for me as well please !!! also if the plate on the interior, just behind drivers shoulder, where you plug it in
is available I want it as well

*1sik52* · 10-24-2009, 08:17 AM

Quote:

Originally Posted by budder71

hold it for me as well please !!! also if the plate on the interior, just behind drivers shoulder, where you plug it in
is available I want it as well

You will have to show me what you are talking about when you get here.

MontanaPete1 · 10-24-2009, 09:48 AM

Can I get in line for the rear seat hold downs?

MontanaPete1 · 10-24-2009, 09:49 AM

What color is the steering wheel?

cmnov · 10-24-2009, 01:36 PM

hey, sent you a message at 5am this morning as a reply to your question if i still wanted the wire harness for the blazer top. yes was the answer and sorry for the delay on the paypal. was also waiting to hear back on license plate light availability. i'm new so if i've messed up and it's promised elsewhere i'll live with that but i did reply and was waiting to hear on the other item before i paid to get a new total. please let me know,colin

full foot notch · 10-26-2009, 04:04 PM

pm me if you have the hardtop portion, i need one

**jaros44sr** · 10-26-2009, 09:18 PM

Is the rear wiring harness, taillites and such, in good shape? If so I would be interested...

*1sik52* · 10-26-2009, 09:22 PM

Quote:

Originally Posted by MontanaPete1

What color is the steering wheel?

No good

Quote:

Originally Posted by cmnov

hey, sent you a message at 5am this morning as a reply to your question if i still wanted the wire harness for the blazer top. yes was the answer and sorry for the delay on the paypal. was also waiting to hear back on license plate light availability. i'm new so if i've messed up and it's promised elsewhere i'll live with that but i did reply and was waiting to hear on the other item before i paid to get a new total. please let me know,colin

I will have to let you know tomorrow because the next person in line put dibs on it and he says he will get it tomorrow. If he doesnt take it I eill put you back in line.

Quote:

Originally Posted by full foot notch

pm me if you have the hardtop portion, i need one

No Top

Quote:

Originally Posted by jaros44sr

Is the rear wiring harness, taillites and such, in good shape? If so I would be interested...

I will check tomorrow for you.

**jaros44sr** · 10-27-2009, 12:53 AM

Quote:

Originally Posted by 1sik52

I will check tomorrow for you.

Thanks Sik

**Gary 70 Jimmy** · 10-27-2009, 08:32 AM

Do you have the radio speaker and cover.

*1sik52* · 10-27-2009, 09:41 AM

Quote:

Originally Posted by Gary 70 Jimmy

Do you have the radio speaker and cover.

No

*1sik52* · 10-28-2009, 09:08 AM

Updated list

robs71k5 · 10-28-2009, 07:22 PM

Is there any chrome carpet strips (angles) at the step behind the buckets
Thanx Rob

*1sik52* · 10-28-2009, 07:36 PM

Quote:

Originally Posted by robs71k5

Is there any chrome carpet strips (angles) at the step behind the buckets
Thanx Rob

No, Sorry. The only strips I have are the polished stainless strips that hold down the single wall top

drunkbus · 10-28-2009, 08:08 PM

One of the first replies Hgs_notes asked about the rear frame horns. I didn't see any response but I'd like to get in line if they are available.

10-22-2009, 04:05 PM	#52
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting Out 72 Blazer I need a couple random patches. I beed one on the inner bed side, by the floor between the door and the wheel well on the driver's side. I also could use the center section of the windshield frame if it is decent (8-12" centered where the mirror would be) Might need a couple other parts, but that's all I can think of for now. Might consider the under-dash wiring harness if it originally came with gauges. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

10-22-2009, 07:32 PM	#54
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Updated

10-22-2009, 07:40 PM	#55
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parting Out 72 Blazer Is the tilt wheel sold? How about the aluminum grille surround and / or plastic grill insert? Price and condition, as well as shipping to Leander Tx 78641

10-22-2009, 07:51 PM	#57
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer I am for SURE going to take the front bucket seats, rear seat, and all hardware to accompany them and the vent window assemblies.. if no one has sent money on the roll bar I will take it as well.. just send me a pm with a total breakdown and total cost and I will send money for everything today if you like and if not I will be down no later than next Tuesday to pick it all up.. thanks again !!!!

10-23-2009, 02:29 PM	#59
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Updated

10-23-2009, 09:22 PM	#60
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Im putting the wire harness from the fuse block to the blazer top back up for sale if anyone wants it.

10-23-2009, 11:04 PM	#61
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer hold it for me as well please !!! also if the plate on the interior, just behind drivers shoulder, where you plug it in is available I want it as well Last edited by budder71; 10-23-2009 at 11:06 PM. Reason: forgot a question

10-24-2009, 09:48 AM	#63
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	Re: Parting Out 72 Blazer Can I get in line for the rear seat hold downs? __________________ "Drive it like you stole it!"

10-24-2009, 09:49 AM	#64
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	Re: Parting Out 72 Blazer What color is the steering wheel? __________________ "Drive it like you stole it!"

10-24-2009, 01:36 PM	#65
cmnov Registered User Join Date: Aug 2007 Location: lexington,ma Posts: 22	Re: Parting Out 72 Blazer hey, sent you a message at 5am this morning as a reply to your question if i still wanted the wire harness for the blazer top. yes was the answer and sorry for the delay on the paypal. was also waiting to hear back on license plate light availability. i'm new so if i've messed up and it's promised elsewhere i'll live with that but i did reply and was waiting to hear on the other item before i paid to get a new total. please let me know,colin

10-26-2009, 04:04 PM	#66
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	Re: Parting Out 72 Blazer pm me if you have the hardtop portion, i need one

10-26-2009, 09:18 PM	#67
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Parting Out 72 Blazer Is the rear wiring harness, taillites and such, in good shape? If so I would be interested... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-27-2009, 08:32 AM	#70
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting Out 72 Blazer Do you have the radio speaker and cover. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

10-28-2009, 09:08 AM	#72
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Updated list

10-28-2009, 07:22 PM	#73
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: Parting Out 72 Blazer Is there any chrome carpet strips (angles) at the step behind the buckets Thanx Rob



Register or Log In To remove these advertisements.

10-28-2009, 08:08 PM	#75
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: Parting Out 72 Blazer One of the first replies Hgs_notes asked about the rear frame horns. I didn't see any response but I'd like to get in line if they are available.

Register or Log In To remove these advertisements.