WY Parting 1972 K20 suburban - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 11-05-2009, 10:41 PM

Have you been able to dig out any of the parts yet for pics??? Thanks Trevor

sakohntr · 11-05-2009, 11:46 PM

Dennis, how much for the chrome trani lever (not the T/C lever)? It just pops right out. I have only seen one other that is original chrome and what kind of shape is that one in? thanks

*sharpie1972* · 11-06-2009, 09:51 AM

Trevor, no new pics yet, but I plan on spending the entire weekend at my shop.
Sakohntr: This was originally an automatic sub, so I'm not sure of the pedigree of the shifter handle, at first glance I was guessing newer 465, but I should compare it to an original shifter to see. Thanks, Sharpie

olblue60@aol.com · 11-06-2009, 09:56 AM

The shifter looks like mine out of a 1979

swyfor5 · 11-21-2009, 10:13 PM

Hey Sharpie, still got that hump? Think the burb one would work in my K5? It looks like what I need to swap in that NP205 case! Seems my dana 20 hump is different than the np205 hump. Let me know, Thank's, Bryan.

k5kev · 11-22-2009, 01:51 PM

Sharpie, I need the pair of body mount brackets that are riveted to the frame just above the front hanger of the rear leaf springs (I'm converting a truck frame to Burb). It's a bit of work to get these off,....so let me know if you can make it happen.

Thanks, Kevin

*sharpie1972* · 11-22-2009, 01:57 PM

K5Kev: You bet I can make it happen. I will be under that burb today anyway. $100 shipped. Thanks, Sharpie

k5kev · 11-22-2009, 02:19 PM

I'll take 'em assuming there is no major rust.

Any chance there is a 205 skid plate and crossmember under there too?

Also might be interested in the 3rd and 4th door (so to speak) glass division bars. Shape? Price?

*sharpie1972* · 11-22-2009, 02:29 PM

No Rust, I just checked them. I'll get you some door pics and check for the skid plate. Thanks, Sharpie

*sharpie1972* · 11-22-2009, 02:42 PM

3rd door is very solid, One ding in the center and a slight crease in the corner. Door bottom is excellent with no swelling at the seam. 205 crossmember is present, no skid plate. Thanks, Sharpie

*sharpie1972* · 11-22-2009, 02:43 PM

More door pics

ABHaulR · 11-22-2009, 11:27 PM

Hey Sharpie, How about the rear doors and hardware? How much and what condition? Thanks Dwayne

*sharpie1972* · 11-22-2009, 11:33 PM

Hi Dwayne, Someone changed from the clam shell to the barn doors and didn't install the top straps (they were laying in the back) then they let the doors flop open and get dented by the tail lights. A real shame they probably would have been near perfect. At this point they would probably require more body work than they are worth. Thanks, Sharpie

ABHaulR · 11-23-2009, 12:04 AM

Well, let me know what you would like to get for them. I or the other drivers i work with come up to Cody from time to time. Thanks Dwayne

*sharpie1972* · 11-23-2009, 12:09 AM

Hi Dwayne, I can get you some pics tomorrow. $200 for the pair with all hardware. Thanks, Sharpie

ABHaulR · 11-23-2009, 12:15 AM

Ok thanks. Dwayne

custombuilt67-72 · 11-23-2009, 02:43 PM

Do you still have the upper thin trim that mounts under the window. I need the whole set. In an earlier post someone need one door strip, so even if a piece or to is missing or damaged, please quote price to Cleveland, NC 27013.
Thanks, Mike

*sharpie1972* · 11-23-2009, 03:09 PM

Hi Mike, still have it. I have some detailed pics if you need them. One small corner piece (drivers rear) is damaged. The rest of the straight pieces are nice. No trim for the rear doors. $200 shipped for the set. Thanks, Sharpie

*sharpie1972* · 11-23-2009, 07:21 PM

Rear door pics for ABHAULR. Thanks, Sharpie

*sharpie1972* · 11-23-2009, 07:22 PM

More pics

**oldgold70c10** · 11-23-2009, 08:01 PM

Man, you already started cuttin the body up! it looks better than mine...

*sharpie1972* · 11-23-2009, 10:37 PM

There's a reason it got changed from clam shell to doors, the entire back 1/4's are pink plastic. Ya win some ya lose some. Sharpie

rsavage · 11-24-2009, 10:44 AM

am interested in the headliner and all side strips and bows. Please check on price with shipping to 14004 Alden NY. thanks, Rick

*sharpie1972* · 11-24-2009, 10:50 AM

Hi Rick, $150 plus shipping. Package would be oversize to ship. Greyhound bus would probably be the best. $65-75 if you have a depot nearby. Thanks, Sharpie

rsavage · 11-24-2009, 10:57 AM

I will take them but have never shipped/received anything greyhound bus. I think there is one in Buffalo NY. Let me check so you can get a definite price. Thanks. I'll get right back to you. Rick

11-05-2009, 10:41 PM	#51
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,153	Re: Parting 1972 K20 suburban Have you been able to dig out any of the parts yet for pics??? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-05-2009, 11:46 PM	#52
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: Parting 1972 K20 suburban Dennis, how much for the chrome trani lever (not the T/C lever)? It just pops right out. I have only seen one other that is original chrome and what kind of shape is that one in? thanks __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

11-06-2009, 09:51 AM	#53
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Trevor, no new pics yet, but I plan on spending the entire weekend at my shop. Sakohntr: This was originally an automatic sub, so I'm not sure of the pedigree of the shifter handle, at first glance I was guessing newer 465, but I should compare it to an original shifter to see. Thanks, Sharpie

11-06-2009, 09:56 AM	#54
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting 1972 K20 suburban The shifter looks like mine out of a 1979 __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-21-2009, 10:13 PM	#55
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Parting 1972 K20 suburban Hey Sharpie, still got that hump? Think the burb one would work in my K5? It looks like what I need to swap in that NP205 case! Seems my dana 20 hump is different than the np205 hump. Let me know, Thank's, Bryan.

11-22-2009, 01:51 PM	#56
k5kev New Member Join Date: Apr 2006 Location: Anaheim, CA Posts: 304	Re: Parting 1972 K20 suburban Sharpie, I need the pair of body mount brackets that are riveted to the frame just above the front hanger of the rear leaf springs (I'm converting a truck frame to Burb). It's a bit of work to get these off,....so let me know if you can make it happen. Thanks, Kevin

11-22-2009, 01:57 PM	#57
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban K5Kev: You bet I can make it happen. I will be under that burb today anyway. $100 shipped. Thanks, Sharpie

11-22-2009, 02:19 PM	#58
k5kev New Member Join Date: Apr 2006 Location: Anaheim, CA Posts: 304	Re: Parting 1972 K20 suburban I'll take 'em assuming there is no major rust. Any chance there is a 205 skid plate and crossmember under there too? Also might be interested in the 3rd and 4th door (so to speak) glass division bars. Shape? Price?

11-22-2009, 02:29 PM	#59
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban No Rust, I just checked them. I'll get you some door pics and check for the skid plate. Thanks, Sharpie

11-22-2009, 02:42 PM	#60
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban 3rd door is very solid, One ding in the center and a slight crease in the corner. Door bottom is excellent with no swelling at the seam. 205 crossmember is present, no skid plate. Thanks, Sharpie Attached Images

11-22-2009, 02:43 PM	#61
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban More door pics Attached Images

11-22-2009, 11:27 PM	#62
ABHaulR Registered User Join Date: Jun 2003 Location: West Valley City, Ut Posts: 311	Re: Parting 1972 K20 suburban Hey Sharpie, How about the rear doors and hardware? How much and what condition? Thanks Dwayne __________________ 72' GMC Suburban 10 1/2" of Lift, 40" Tires! Waiting for restoration 67' Chevy, What to do??? And Bad Ass American Bulldogs!

11-22-2009, 11:33 PM	#63
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Hi Dwayne, Someone changed from the clam shell to the barn doors and didn't install the top straps (they were laying in the back) then they let the doors flop open and get dented by the tail lights. A real shame they probably would have been near perfect. At this point they would probably require more body work than they are worth. Thanks, Sharpie

11-23-2009, 12:04 AM	#64
ABHaulR Registered User Join Date: Jun 2003 Location: West Valley City, Ut Posts: 311	Re: Parting 1972 K20 suburban Well, let me know what you would like to get for them. I or the other drivers i work with come up to Cody from time to time. Thanks Dwayne __________________ 72' GMC Suburban 10 1/2" of Lift, 40" Tires! Waiting for restoration 67' Chevy, What to do??? And Bad Ass American Bulldogs!

11-23-2009, 12:09 AM	#65
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Hi Dwayne, I can get you some pics tomorrow. $200 for the pair with all hardware. Thanks, Sharpie



Register or Log In To remove these advertisements.

11-23-2009, 12:15 AM	#66
ABHaulR Registered User Join Date: Jun 2003 Location: West Valley City, Ut Posts: 311	Re: Parting 1972 K20 suburban Ok thanks. Dwayne __________________ 72' GMC Suburban 10 1/2" of Lift, 40" Tires! Waiting for restoration 67' Chevy, What to do??? And Bad Ass American Bulldogs!

11-23-2009, 02:43 PM	#67
custombuilt67-72 Registered User Join Date: Oct 2005 Location: Cleveland, N.C. Posts: 13	Re: Parting 1972 K20 suburban Do you still have the upper thin trim that mounts under the window. I need the whole set. In an earlier post someone need one door strip, so even if a piece or to is missing or damaged, please quote price to Cleveland, NC 27013. Thanks, Mike

11-23-2009, 03:09 PM	#68
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Hi Mike, still have it. I have some detailed pics if you need them. One small corner piece (drivers rear) is damaged. The rest of the straight pieces are nice. No trim for the rear doors. $200 shipped for the set. Thanks, Sharpie

11-23-2009, 07:21 PM	#69
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Rear door pics for ABHAULR. Thanks, Sharpie Attached Images

11-23-2009, 07:22 PM	#70
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban More pics Attached Images

11-23-2009, 08:01 PM	#71
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: Parting 1972 K20 suburban Man, you already started cuttin the body up! it looks better than mine... __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

11-23-2009, 10:37 PM	#72
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban There's a reason it got changed from clam shell to doors, the entire back 1/4's are pink plastic. Ya win some ya lose some. Sharpie

11-24-2009, 10:44 AM	#73
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Parting 1972 K20 suburban am interested in the headliner and all side strips and bows. Please check on price with shipping to 14004 Alden NY. thanks, Rick

11-24-2009, 10:50 AM	#74
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Hi Rick, $150 plus shipping. Package would be oversize to ship. Greyhound bus would probably be the best. $65-75 if you have a depot nearby. Thanks, Sharpie

11-24-2009, 10:57 AM	#75
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Parting 1972 K20 suburban I will take them but have never shipped/received anything greyhound bus. I think there is one in Buffalo NY. Let me check so you can get a definite price. Thanks. I'll get right back to you. Rick

Register or Log In To remove these advertisements.