Phlebmaster's 1972 C20 Evolution***56k- NO WAY! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Phlebmaster · 03-28-2010, 11:22 PM

Quote:

Originally Posted by nuke1

Looks Great, can not wait to see it installed into the truck, should be a decent runner!!!!

Thanks!!

I pulled my old engine out today. My daughter was a BIG helper!! We are fortunate enough to be able to work in a shop of a friend rather than out side in the cold.

There she is, just waiting to rumble. You can also see my selection of lubricants.

And so it begins......

Cheyanne is my helper. She says since the truck has her name on it that it belongs to her. hahahaha

I am making a pile in some sort of organization so I remember what goes where.

Ready to pull the old one out...

Now I will clean this up and paint it.

VA72C10 · 03-28-2010, 11:47 PM

Good progress!

Phlebmaster · 04-01-2010, 12:12 AM

I am soooo close to installing this engine. I may have it in the truck tomorrow evening and I will have it running by Saturday for sure. I put on another HEI I managed to get my hands on and I have the wire set from the ignition 12 volt source.

Here she is again!!

Phlebmaster · 04-02-2010, 12:54 AM

I finished the install tonight. All I need to do now is put coolant into the radiator and start her up. I will do that on Saturday and have a neat swap video to share.

Here are the obligatory pics.

My helper was excited to get started...

I made sure that torque converter thing was put in all the way...

Got it in, just getting everything lined up...

Just to prove that I actually did some work. lol

VA72C10 · 04-02-2010, 12:57 AM

COOL! Congrats!

Phlebmaster · 04-03-2010, 09:57 AM

Quote:

Originally Posted by VA72C10

COOL! Congrats!

Thank you.

Today is the day!! I will make a video of the start up and then combine pictures of the whole process in a youtube video. My daughter did a bunch of work on this project and I am very proud of her.....and myself for that matter. This was my first bare block build.

FRENCHBLUE72 · 04-03-2010, 12:46 PM

Congrats on the great build thread from southern oregon now get her running can wait to hear the video..

Phlebmaster · 04-03-2010, 08:40 PM

Here is the promised video.

YouTube- sbc 350 swap video.wmv

VA72C10 · 04-03-2010, 11:49 PM

cool. got it running. Good job!!!

Phlebmaster · 04-18-2010, 06:45 PM

Quote:

Originally Posted by VA72C10

cool. got it running. Good job!!!

Thank you

Now that the engine is done I am getting started on the body and paint. Today I put the beginning touches on the flat black paint I want to use as a base coat.

VA72C10 · 04-18-2010, 07:42 PM

I haven't decided myself yet if I want to do a satin black paint or a glossy when I get back to my longbed build....

Phlebmaster · 04-25-2010, 07:06 PM

Quote:

Originally Posted by VA72C10

I haven't decided myself yet if I want to do a satin black paint or a glossy when I get back to my longbed build....

I am considering going with the Hot Rod black which is a satin. So far I am liking the black.

I finished priming the cab today with the flat black paint. I will finish the bed when I have more time...but she is coming together nicely.

Phlebmaster · 05-01-2010, 12:22 AM

I will be finishing the primer this weekend and making a burnout video. hehehehe STAY TUNED!!!

VA72C10 · 05-01-2010, 12:30 AM

looks good all one color!

Phlebmaster · 05-02-2010, 01:14 AM

Quote:

Originally Posted by VA72C10

looks good all one color!

Yes it does!! Now time for the bodywork. I am thinking of painting her Massey-Ferguson Red. The paint is cheap so I can change my mind later if I don't like it.

Phlebmaster · 05-02-2010, 07:29 PM

Ok...here ya go.

YouTube- Phlebmaster's 72 chevy dual exhaust and...

I finished the paint/primer today. She looks much better all one color.

VA72C10 · 05-02-2010, 07:51 PM

cool...

Ru5tyNut5 · 05-21-2010, 08:07 PM

so when will you be at my house to work on my motor? I'm only 30 minutes away....

Phlebmaster · 05-22-2010, 08:20 PM

Quote:

Originally Posted by Ru5tyNut5

so when will you be at my house to work on my motor? I'm only 30 minutes away....

LOL anytime! I work for beer and food..

Well, I went ahead and did it again! I spent some money and bought my truck a brand new Holley 750 0-3310c manual choke with vac secondaries.

I LOVE this carb! All I had to do is put it on and start the truck. No more messing around with old questionable carburetors. The 750 has quite a bit more kick than the Holley 570 I just took off.

Oh, not to mention that it looks pretty sweet on the engine too.

67chevylongbed · 08-22-2010, 01:55 AM

Any updates?

chevycustoms · 09-09-2011, 02:56 PM

Hello everyone! My name is Justin. I am the one that bought Phlebmaster's truck. I have to say that the engine is still running very strong! one great build! I have made several changes though..It still has the mr. gasket headers, but they now feed dual forty series flowmasters ( It has a loud enough rumble now that it rattles the pictures on our walls!!! ) and just for future reference, orange RTV silicone is not for exauhst connections Phleb LOL ! I know thats all you had at the moment!
The wife hates it, but thats ok right....? Also I added a high torque starter, new HEI dist. ( the old one was toast ) Also I have done a ton of body work and it has gray surface primer on it now. I will keep you updated on more changes and future progress.

chevycustoms · 09-09-2011, 03:18 PM

As soon as i can I will some new pix.
added items to truck;
chrome valve covers
billet grill insert
HID headlights with halo's (actually looks pretty good)
New starter
Flowmasters
updated wiring
Lots more to come!

VA72C10 · 09-09-2011, 03:29 PM

Welcome to the board and thanks for posting so we can see this truck project continue

chevycustoms · 09-09-2011, 05:00 PM

Here she is!! The new and improved c20

VA72C10 · 09-09-2011, 05:06 PM

very nice!!!

03-28-2010, 11:47 PM	#52
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* Good progress! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-01-2010, 12:12 AM	#53
Phlebmaster Registered User Join Date: Nov 2009 Location: Oregon City, OR Posts: 146	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* I am soooo close to installing this engine. I may have it in the truck tomorrow evening and I will have it running by Saturday for sure. I put on another HEI I managed to get my hands on and I have the wire set from the ignition 12 volt source. Here she is again!! __________________ Thanks, Aaron Life is about making dreams come true, stop dreaming and make life happen. 64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine. Assumptions always lead to a dead end!

04-02-2010, 12:54 AM	#54
Phlebmaster Registered User Join Date: Nov 2009 Location: Oregon City, OR Posts: 146	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* I finished the install tonight. All I need to do now is put coolant into the radiator and start her up. I will do that on Saturday and have a neat swap video to share. Here are the obligatory pics. My helper was excited to get started... I made sure that torque converter thing was put in all the way... Got it in, just getting everything lined up... Just to prove that I actually did some work. lol __________________ Thanks, Aaron Life is about making dreams come true, stop dreaming and make life happen. 64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine. Assumptions always lead to a dead end!

04-02-2010, 12:57 AM	#55
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* COOL! Congrats! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-03-2010, 12:46 PM	#57
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* Congrats on the great build thread from southern oregon now get her running can wait to hear the video.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-03-2010, 11:49 PM	#59
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* cool. got it running. Good job!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-18-2010, 07:42 PM	#61
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* I haven't decided myself yet if I want to do a satin black paint or a glossy when I get back to my longbed build.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-01-2010, 12:22 AM	#63
Phlebmaster Registered User Join Date: Nov 2009 Location: Oregon City, OR Posts: 146	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* I will be finishing the primer this weekend and making a burnout video. hehehehe STAY TUNED!!! __________________ Thanks, Aaron Life is about making dreams come true, stop dreaming and make life happen. 64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine. Assumptions always lead to a dead end!

05-01-2010, 12:30 AM	#64
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* looks good all one color! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-02-2010, 07:51 PM	#67
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* cool... __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-21-2010, 08:07 PM	#68
Ru5tyNut5 Registered User Join Date: Mar 2009 Location: Vancouver, WA Posts: 296	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* so when will you be at my house to work on my motor? I'm only 30 minutes away.... __________________ '55 Pontiac - Project '63 GMC - Project '76 Chev stepside rust bucket - Bagged daily driver Project Ru5tyNut5

08-22-2010, 01:55 AM	#70
67chevylongbed Registered User Join Date: May 2009 Location: Carmichael, California Posts: 576	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* Any updates? __________________ Eric 1967 C10 LWB SOLD.... 1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan

09-09-2011, 02:56 PM	#71
chevycustoms Registered User Join Date: Sep 2011 Location: portland, Or Posts: 18	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* Hello everyone! My name is Justin. I am the one that bought Phlebmaster's truck. I have to say that the engine is still running very strong! one great build! I have made several changes though..It still has the mr. gasket headers, but they now feed dual forty series flowmasters ( It has a loud enough rumble now that it rattles the pictures on our walls!!! ) and just for future reference, orange RTV silicone is not for exauhst connections Phleb LOL ! I know thats all you had at the moment! The wife hates it, but thats ok right....? Also I added a high torque starter, new HEI dist. ( the old one was toast ) Also I have done a ton of body work and it has gray surface primer on it now. I will keep you updated on more changes and future progress. __________________ Justin 1972 c20 350sbc

09-09-2011, 03:18 PM	#72
chevycustoms Registered User Join Date: Sep 2011 Location: portland, Or Posts: 18	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* As soon as i can I will some new pix. added items to truck; chrome valve covers billet grill insert HID headlights with halo's (actually looks pretty good) New starter Flowmasters updated wiring Lots more to come! __________________ Justin 1972 c20 350sbc Last edited by chevycustoms; 09-09-2011 at 03:28 PM.

09-09-2011, 03:29 PM	#73
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* Welcome to the board and thanks for posting so we can see this truck project continue __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

09-09-2011, 05:00 PM	#74
chevycustoms Registered User Join Date: Sep 2011 Location: portland, Or Posts: 18	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* Here she is!! The new and improved c20 Attached Images __________________ Justin 1972 c20 350sbc

09-09-2011, 05:06 PM	#75
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Phlebmaster's 1972 C20 Evolution56k- NO WAY!* very nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.