WY 1971 4x4 blazer parts

[sharpie1972]

tjsblazer: Both of the rolling chassis blazers are auto. The one that was in pieces was a 4 speed.
lks dcvn: I will post pics etc. when I pick up the second blazer, it's mostly a tub with top on. Thanks, Sharpie

[budman k20]

Hi,

I will take the chrome shifter for the transfer case if available. Let me know how you want to be paid.

Thanks

Bud

[sharpie1972]

PM sent. Thanks, Sharpie

[lks dcvn]

Sounds good - thx.

[Eddie Meredith]

I am interested in the engine compartment ac housing shipped to 80904 provided it is in good condition. Thanks

[sharpie1972]

Eddie: I will post some pics and price later today. Thanks, Sharpie

[Duncan and son]

Dennis you have so much stuff it is hard to keep up with. Do you still have the wood grain tach dash with the broken bezel? If so how much ?
Always appreciate you Paul

[sharpie1972]

Hi Paul, I'm thinking of seeking counseling for my 67-72 habit! Tach. dash is still available for $250 shipped. Thanks, Sharpie

[sharpie1972]

Too much stuff: No 4x4 oil dipstick at this time.
Eddie: A.C. housing is cracked where vacuum canister mounts. I can pull the tape and get additional pics if you are still interested. Thanks, Sharpie

[swyfor5]

Sharpie, no counseling! Keep up the good work finding this stuff! Thank's!

[68 C-10 Panel]

Thanks sharpie for being nice.... my post was not to smart at best. Floor shift is for the 4wd . anyway cant afford the column right now, and the "skins" that I were wrongly describing are the white door panels. Does any one know if they would fit on my 68 panel truck? They look the same. Anyway I wanted to wait and see if you get your asking price, but if not and your willing to come down any I'll see if I can convince the banker to release some funds. I've been laid off for a year and she wont let me buy anything. But some deals are too good to pass up. Thanks again.

[sharpie1972]

68 C-10 panel: The door panels will fit your 68 panel no problem. I can go $65 shipped if you can get the banker to release funds! I wish I could come down more, but shipping charges have gone through the roof on bigger items. Thanks, Sharpie

[tnblazerk5]

tnblazerk5: They should work fine on the 4x4 with smallblock and TH350. That was the setup in the Blazer and they fit fine and cleared the shifter. As far as the 2wd goes I'm not sure. Any areas or angles in particular you would like more pics of? Thanks, Sharpie

yeah i was wanting to see the top (flange that bolts to heads)
and where the tubes all come together , do you know it they leaked anywhere or if they blew out header gaskets alot ?

[sharpie1972]

tnblazerk5: A few more pics. I'm sure the paper gaskets leaked quite often. I'm more of a manifold guy myself, but I believe there are some pretty good upgrades as far as header gaskets go. These were not on the Blazer very long. Sharpie

[68 C-10 Panel]

Ok I think I can manage that, but I know that will be all for a while. So I may as well ask, did that include the armrests? The previous owner took all the door stuff off. I need all the stuff, the armrests, the screws, window crank handles, and the little plastic washers behind them(escutcheons I think). He did leave the windows and the door handles . Thanks in advance if I didn't press my luck too much.

[sharpie1972]

I'll give you the armrest and window cranks no charge if you pay shipping. I think they will fit in a $10.35 flat rate box. That totals $75 and change. Hope that works for you. Sharpie

[68 C-10 Panel]

That sounds like a deal, Thanks for the extras, send me the details.

[sharpie1972]

PM sent. Sharpie

[vettejohn]

Hi - did I see some parchment seat belts in one picture? I could be interested with a better picture or more information. Thanks, John

[sharpie1972]

Hi John, yes there are some. They are in pretty poor shape though. Thanks, Sharpie

[1949gmc]

Dennis-

Would you have a decent e-brake intermediate cable? Mine is just about worn through where it goes thru the two hangers.

Ray

[sharpie1972]

Hi Ray, I'll check the Blazers over and let you know if I've got a good one. Thanks, Dennis

[drunkbus]

My stuff came today. Looks like it should work. Thank you.

[72supermike]

Hi, I need the outer front bumper brackets for a 4X4. They mount through the middle of the front core support bracket on the frame and go to the outer portion of the bumper whereas the 2wd mounts behind them through the frame. I assume they are the same for trucks as blazers. If you have them a price shipped to 83833 would be great. Thanks!

[sharpie1972]

72supermike: Clean 71/72 4x4 front outer brackets. No pitting, hairline crack at frame side. Should paint or powder coat nice. $65 shipped. Thanks, Sharpie