New to BBC - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ripdog28 · 10-29-2010, 06:10 AM

I paid $700 for some H-beams and Forged KB's. $300 for the crank. you can save a lot on KB forged. The heads were $1400. A BBC short block will handle lots of power in stock form. No need to get the 4340 stuff for a street app. Will save lots there.

1971ls1longbed · 10-29-2010, 01:11 PM

can u really run a solid roller on the street

djracer · 10-29-2010, 06:00 PM

My buddy runs one on his street car.

1971ls1longbed · 10-30-2010, 11:57 AM

Well today is the day! In just a few short hours i will be picking up my 454 shortblock

djracer · 10-30-2010, 01:48 PM

once you go big block you never go back

gearys 5600 · 10-30-2010, 02:47 PM

Quote:

Originally Posted by 1971ls1longbed

can u really run a solid roller on the street

Ran one for years..

1971ls1longbed · 10-30-2010, 06:53 PM

im so amped to start working on this thing. i found out it came out of a 79 truck. its only a 2 bolt but is fine for my build, and its a virgin block i think in the next two weeks im going to drop the block off and have it baked bored and checked

1971ls1longbed · 11-01-2010, 12:13 AM

if i want to use factory heads r there any castings i should look for

djracer · 11-01-2010, 07:16 AM

look for 781, 049 or 990 heads the first two are big oval ports and should be easier to find. The third set is a closed chamber square port like came on original ls7's in Chevelle's, Corvette's and Nova's.

1971ls1longbed · 11-08-2010, 02:23 PM

hey guys can you give me some input on solid roller setup on the street as far as duration and lift ranges that are safe for 10:1 to 10.25:1 on 93 octane

10-29-2010, 06:10 AM	#51
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: New to BBC I paid $700 for some H-beams and Forged KB's. $300 for the crank. you can save a lot on KB forged. The heads were $1400. A BBC short block will handle lots of power in stock form. No need to get the 4340 stuff for a street app. Will save lots there. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build. Last edited by ripdog28; 10-29-2010 at 06:11 AM.

10-29-2010, 01:11 PM	#52
1971ls1longbed Registered User Join Date: Dec 2009 Location: Voorhees NJ Posts: 188	Re: New to BBC can u really run a solid roller on the street __________________ 1971 Custom 10 LWB. 461 BBC and built 700r4 to be transplanted 1997 C3500 DRW Ext cab. 454, 4L80E daily driver

10-29-2010, 06:00 PM	#53
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: New to BBC My buddy runs one on his street car. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-30-2010, 11:57 AM	#54
1971ls1longbed Registered User Join Date: Dec 2009 Location: Voorhees NJ Posts: 188	Re: New to BBC Well today is the day! In just a few short hours i will be picking up my 454 shortblock __________________ 1971 Custom 10 LWB. 461 BBC and built 700r4 to be transplanted 1997 C3500 DRW Ext cab. 454, 4L80E daily driver

10-30-2010, 01:48 PM	#55
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: New to BBC once you go big block you never go back __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-30-2010, 06:53 PM	#57
1971ls1longbed Registered User Join Date: Dec 2009 Location: Voorhees NJ Posts: 188	Re: New to BBC im so amped to start working on this thing. i found out it came out of a 79 truck. its only a 2 bolt but is fine for my build, and its a virgin block i think in the next two weeks im going to drop the block off and have it baked bored and checked __________________ 1971 Custom 10 LWB. 461 BBC and built 700r4 to be transplanted 1997 C3500 DRW Ext cab. 454, 4L80E daily driver

11-01-2010, 12:13 AM	#58
1971ls1longbed Registered User Join Date: Dec 2009 Location: Voorhees NJ Posts: 188	Re: New to BBC if i want to use factory heads r there any castings i should look for __________________ 1971 Custom 10 LWB. 461 BBC and built 700r4 to be transplanted 1997 C3500 DRW Ext cab. 454, 4L80E daily driver

11-01-2010, 07:16 AM	#59
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: New to BBC look for 781, 049 or 990 heads the first two are big oval ports and should be easier to find. The third set is a closed chamber square port like came on original ls7's in Chevelle's, Corvette's and Nova's. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-08-2010, 02:23 PM	#60
1971ls1longbed Registered User Join Date: Dec 2009 Location: Voorhees NJ Posts: 188	Re: New to BBC hey guys can you give me some input on solid roller setup on the street as far as duration and lift ranges that are safe for 10:1 to 10.25:1 on 93 octane __________________ 1971 Custom 10 LWB. 461 BBC and built 700r4 to be transplanted 1997 C3500 DRW Ext cab. 454, 4L80E daily driver



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.