NC 72' Chevy Pickup Parting Out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 11-26-2010, 11:13 AM

In need of the front bake lines, from the p/v that run to each side along the crossmember. What condition? Were brakes functioning?

tanman722001 · 11-26-2010, 12:09 PM

Quote:

Originally Posted by 72chevy383

$30.00 plus shipping fair enough?

Can you post pics of the bumper brackets.Thanks Tony

projectjimmie68 · 11-26-2010, 05:34 PM

still waiting for the info on the transmission lines. Projectjimmie68:

budnikguy · 11-26-2010, 06:34 PM

In need of the front bake lines, from the p/v that run to each side along the crossmember. What condition? Were brakes functioning?

*72chevy383* · 11-26-2010, 07:33 PM

Quote:

Originally Posted by crig39

does it have P/S, if so how much for P/S pump and brackets? Carl

I have the P/S pump but no brackets, $20 plus shipping

*72chevy383* · 11-26-2010, 07:34 PM

Quote:

Originally Posted by projectjimmie68

still waiting for the info on the transmission lines. Projectjimmie68:

I'm on the way out to check them now, get back to you soon.

*72chevy383* · 11-26-2010, 07:35 PM

Quote:

Originally Posted by budnikguy

In need of the front bake lines, from the p/v that run to each side along the crossmember. What condition? Were brakes functioning?

Get back to you soon, checking on them.

*72chevy383* · 11-26-2010, 09:59 PM

no tranny lines....sorry

blap · 11-27-2010, 08:19 AM

put me next in line for the steering wheel

gcburdic · 11-27-2010, 11:29 AM

I'm gonna pass on the wheels and rad....don't need them now

*72chevy383* · 11-27-2010, 12:08 PM

Grill Assembly & Door Panels.......SOLD

Arm Rests & Mirrors.......SOLD

Lot of parts still up for grabs....

heymoe · 11-27-2010, 12:38 PM

Quote:

Originally Posted by 72chevy383

Grill Assembly & Door Panels.......SOLD

Arm Rests & Mirrors.......SOLD

Lot of parts still up for grabs....

Where are you at with the steering wheel? I think I am third in line. Just asking before I buy one.

Thanks

*72chevy383* · 11-27-2010, 02:13 PM

Quote:

Originally Posted by tanman722001

Do you have the front bumper brackets all 4 of them?Door sill plates?passenger fender is it any good?Let me know Tony

Tony Pics of the brackets.

Thanks
Tom

*72chevy383* · 11-27-2010, 02:15 PM

Quote:

Originally Posted by budnikguy

In need of the front bake lines, from the p/v that run to each side along the crossmember. What condition? Were brakes functioning?

Are these the lines you need?

*72chevy383* · 11-27-2010, 02:19 PM

Quote:

Originally Posted by ralphie628

how much for the throttle cable off the gas pedal to the carb and door regulators? thanks

Is this the cable you need, I also will sell the window regulators.

**71blksuper4x4** · 11-27-2010, 04:41 PM

I am passing on the steering wheel, Heymoe, I believe you are up next. Trevor

Littletony · 11-27-2010, 05:13 PM

Do you have any pics of the bed?

heymoe · 11-27-2010, 07:09 PM

Quote:

Originally Posted by 71blksuper4x4

I am passing on the steering wheel, Heymoe, I believe you are up next. Trevor

Thank you Sir!

I will take it

Alex Hayley · 11-27-2010, 09:58 PM

Are you able, or willing to, transport some of the larger parts such as the bed and doors?

budnikguy · 11-27-2010, 10:09 PM

Yes, but, I need them all the way back to the proportioning valve...the passenger side runs along the bottom of the front crossmember and they both end up at the proportioning valve and master cylinder. amThanks!

Adam

Quote:

Originally Posted by 72chevy383

Are these the lines you need?

Six862m6 · 11-27-2010, 10:18 PM

In need of a really small part if available; need the plug and partial pig tail for the reverse light switch on the column (not the neutral safety plug). If you don't mind cutting these off the harness of course. If the harness is in good shape, I understand. Also, did this truck have a TH350 in it by any chance? If so, I'd be interested in the shift linkage from the column to the transmission. Shipped to 46143.

Thanks!
David

*72chevy383* · 11-27-2010, 10:19 PM

Quote:

Originally Posted by Alex Hayley

Are you able, or willing to, transport some of the larger parts such as the bed and doors?

The bed I will transport, the doors are staying with the cab, where are you in NC?

*72chevy383* · 11-27-2010, 10:22 PM

Quote:

Originally Posted by budnikguy

Yes, but, I need them all the way back to the proportioning valve...the passenger side runs along the bottom of the front crossmember and they both end up at the proportioning valve and master cylinder. amThanks!

Adam

Adam, I have the master cylinder off and the lines came off the P/V pretty easy, I'll get pics of the whole line on each side and you tell me if you want them.

Thanks
Tom

*72chevy383* · 11-27-2010, 10:25 PM

Quote:

Originally Posted by Six862m6

In need of a really small part if available; need the plug and partial pig tail for the reverse light switch on the column (not the neutral safety plug). If you don't mind cutting these off the harness of course. If the harness is in good shape, I understand. Also, did this truck have a TH350 in it by any chance? If so, I'd be interested in the shift linkage from the column to the transmission. Shipped to 46143.

Thanks!
David

David,
I just pulled the column out today, I will look for the switch and get you a pic, if you like it let me know.

Tom

johnyoung · 11-27-2010, 10:27 PM

Did you sell the steering wheel, if not how much. Also how much for the brake and gas pedal chrome trim and the rear view mirror. I am also in need of some red seat belts if you know anyone out there that can help me out. I'm new and haven't figured out how to post my wanted to buy. Let me know about this stuff I asked about.

11-26-2010, 11:13 AM	#51
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72' Chevy Pickup Parting Out In need of the front bake lines, from the p/v that run to each side along the crossmember. What condition? Were brakes functioning?

11-26-2010, 05:34 PM	#53
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 72' Chevy Pickup Parting Out still waiting for the info on the transmission lines. Projectjimmie68:

11-26-2010, 06:34 PM	#54
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72' Chevy Pickup Parting Out In need of the front bake lines, from the p/v that run to each side along the crossmember. What condition? Were brakes functioning?

11-26-2010, 09:59 PM	#58
72chevy383 Account Suspended Join Date: Feb 2010 Location: Bessemer City, NC Posts: 347	Re: 72' Chevy Pickup Parting Out no tranny lines....sorry

11-27-2010, 08:19 AM	#59
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 72' Chevy Pickup Parting Out put me next in line for the steering wheel

11-27-2010, 11:29 AM	#60
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 72' Chevy Pickup Parting Out I'm gonna pass on the wheels and rad....don't need them now __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

11-27-2010, 12:08 PM	#61
72chevy383 Account Suspended Join Date: Feb 2010 Location: Bessemer City, NC Posts: 347	Re: 72' Chevy Pickup Parting Out Grill Assembly & Door Panels.......SOLD Arm Rests & Mirrors.......SOLD Lot of parts still up for grabs....

11-27-2010, 04:41 PM	#66
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: 72' Chevy Pickup Parting Out I am passing on the steering wheel, Heymoe, I believe you are up next. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-27-2010, 05:13 PM	#67
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: 72' Chevy Pickup Parting Out Do you have any pics of the bed? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

11-27-2010, 09:58 PM	#69
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Re: 72' Chevy Pickup Parting Out Are you able, or willing to, transport some of the larger parts such as the bed and doors?

11-27-2010, 10:18 PM	#71
Six862m6 Registered User Join Date: Oct 2010 Location: Indianapolis, IN Posts: 134	Re: 72' Chevy Pickup Parting Out In need of a really small part if available; need the plug and partial pig tail for the reverse light switch on the column (not the neutral safety plug). If you don't mind cutting these off the harness of course. If the harness is in good shape, I understand. Also, did this truck have a TH350 in it by any chance? If so, I'd be interested in the shift linkage from the column to the transmission. Shipped to 46143. Thanks! David __________________

11-27-2010, 10:27 PM	#75
johnyoung Registered User Join Date: May 2010 Location: London, Kentucky Posts: 88	Re: 72' Chevy Pickup Parting Out Did you sell the steering wheel, if not how much. Also how much for the brake and gas pedal chrome trim and the rear view mirror. I am also in need of some red seat belts if you know anyone out there that can help me out. I'm new and haven't figured out how to post my wanted to buy. Let me know about this stuff I asked about.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.