Nice looking wheels for a good price - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67C10BUB · 03-23-2011, 08:19 PM

Quote:

Originally Posted by gringoloco

67-early 70 = 56" wide
Late 70-72 = 57.5" wide

Yours is a 67 cab on a 71 chassis, correct? That should be the wider axle. The narrow axles are the mid-70 and earlier, which are 3/4" shorter per side and originally 6-lug. Conversion axles are available aftermarket to make them 5-lug. There are wide 6-luggers too, but were 70 only and a bit rare...

Mine is 65" to the outside of the brake drums. I don't know where I was supposed to measure from to get the ones listed above.

NWD02 · 03-25-2011, 02:20 PM

Forum Vendor: Mikes Bump and Grind Garage has pretty much the same wheel available.

I just ordered these from him.

http://www.bgrodworks.com/eng/wheels...ool-gun-metal/

Now I'm trying to figure what tire size to run. Any help????

Hotrob72 · 03-10-2012, 11:10 AM

I just bought a set of 20" streeters (centerline) ordered on a thur and were delivered on monday.....$750

And for the name on the wheel gripe, I have a similer wheel on one of my hotrods. Paid $2700 for the wheels, with a name on'em,,,,,FOOSE

gringoloco · 03-10-2012, 03:30 PM

You can also fill and paint 'em, if it bugs you...

cardreams · 05-24-2012, 11:49 PM

hey guys was looking at getting a set of these in 18s i have a 68c-10 just cahanged it over to 5 lug what backspacing should i get to get the big lip in the back any help would be great thanks

ANDY

Pro Performance · 05-25-2012, 05:34 AM

Hey Andy,

I would go with the 18x8 Front / 18x9 Rear, and run a 275 tire on the rear. We are an authorized Showwheels dealer and already setup a few members on the forum here.

Give me a call and I can set you up with a good price. Below is a link to the wheels on our site that show the backspacing for the different sizes. Which is a 4.5" on the front and 5.25" on the rear for the 18's, which will work on your 68 C10.

Showwheels Streeter

- Travis

Tmwoodall · 05-25-2012, 09:59 AM

Quote:

Originally Posted by Pro Performance

Hey Andy,

I would go with the 18x8 Front / 18x9 Rear, and run a 275 tire on the rear. We are an authorized Showwheels dealer and already setup a few members on the forum here.

Give me a call and I can set you up with a good price. Below is a link to the wheels on our site that show the backspacing for the different sizes. Which is a 4.5" on the front and 5.25" on the rear for the 18's, which will work on your 68 C10.

Showwheels Streeter

- Travis

Any advice against on the 20x10 rear going with a 295? I already have my fronts but need to pick up the rears in the next month or two. I plan on running 295/45/20 rear (20x10), 275/45/20 front (20x8.5)

gringoloco · 05-25-2012, 10:20 AM

Quote:

Originally Posted by Pro Performance

...5.25" on the rear for the 18's, which will work on your 68 C10...

That's too much back spacing for a 9" wheel on that truck. Will be 'sucked in' and possibly rub the inner...

Quote:

Originally Posted by Tmwoodall

Any advice against on the 20x10 rear going with a 295? I already have my fronts but need to pick up the rears in the next month or two. I plan on running 295/45/20 rear (20x10), 275/45/20 front (20x8.5)

My truck pictured above is a 20x10 w/ 295/40-20. Fits great! Had the 45s on my old blazer and they worked well, too.
Posted via Mobile Device

Tmwoodall · 05-25-2012, 10:31 AM

Perfect, thans. Just skimmed your build thread and saw the other pics, looks great. Seemed nice and wide/agressive without having to tub or modify. Good little stagger too. Should be perfect/exactly what I was looking for.

Pro Performance · 05-25-2012, 12:06 PM

I was thinking he might of had the wider axle, but after speaking with him, he has the narrower. So yes, a spacer of .75" to 1" will be needed.

Regarding the 295, that is a good size for that 20x10. The 275 is a little wide for the 8.5, but could work. Just might have more tire bulge on the front than rear..... A 255 would be a better choice and what I would recommend.

Travis
Posted via Mobile Device

Tmwoodall · 05-25-2012, 12:10 PM

Personally, I think it looks great. Could easily go narrower and still look great, but not any wider, that's for sure.

cardreams · 05-25-2012, 09:37 PM

can someone maybe photoshop a set of these wheels on my truck for me 18s if possable please

tattoed71 · 05-25-2012, 09:52 PM

I got at set like those but their from a company named ridler cause the logo on the streeter wheels bugged me
Posted via Mobile Device

cardreams · 05-26-2012, 11:53 PM

bump

VA72C10 · 05-27-2012, 12:03 AM

Quote:

Originally Posted by cardreams

can someone maybe photoshop a set of these wheels on my truck for me 18s if possable please

have you tried the photoshop section yet?

cardreams · 05-27-2012, 12:16 AM

no lol

cardreams · 05-29-2012, 01:58 PM

would u guys go with 18s or 20s on my truck with that drop ????

gringoloco · 05-29-2012, 05:42 PM

20s all the way! 18s can look good, too. It's all about personal preference. Look around at other trucks here and see what you like better...
Posted via Mobile Device

cardreams · 06-13-2012, 10:02 PM

just got shipped today only 5 more days to wait lol going with 18 8 but front and 18 9 back hope they look good

thanks again Travis your a great guy to deal with thanks for all the help

Pro Performance · 06-13-2012, 10:32 PM

No problem! Make sure to post some pictures when you get them on the truck.

Travis
Posted via Mobile Device

cardreams · 06-20-2012, 09:36 PM

would like to thank Travis again love thee new wheels and tires just got them today what ya think

gringoloco · 06-20-2012, 11:33 PM

Much mo betta!
Posted via Mobile Device

Pro Performance · 06-21-2012, 10:15 AM

Truck looks great! The polished goes well with the chrome on your truck. Love that color too!

*E.Furgal* · 06-21-2012, 10:57 AM

mighty cheap.. I'd want to see what type of side loading. it take before breaking..
there has been a rash of wheel breaking when loaded.. at the drags.. ripping the centers where the lugs are off the rest of the wheel..

**70cst** · 06-21-2012, 12:12 PM

I have one word for your truck

03-25-2011, 02:20 PM	#52
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: Nice looking wheels for a good price Forum Vendor: Mikes Bump and Grind Garage has pretty much the same wheel available. I just ordered these from him. http://www.bgrodworks.com/eng/wheels...ool-gun-metal/ Now I'm trying to figure what tire size to run. Any help????

03-10-2012, 11:10 AM	#53
Hotrob72 Registered User Join Date: Feb 2012 Location: Bend Oregon Posts: 188	Re: Nice looking wheels for a good price I just bought a set of 20" streeters (centerline) ordered on a thur and were delivered on monday.....$750 And for the name on the wheel gripe, I have a similer wheel on one of my hotrods. Paid $2700 for the wheels, with a name on'em,,,,,FOOSE __________________ 1971 chevy c10 ECE 4.5/6 dropped 1970 suburban ECE 4/6 Dropped 45K original miles so far 1948 Ford Sedan 1941 Dodge COE 1932 ford roadster the rest are normal drivers

03-10-2012, 03:30 PM	#54
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Nice looking wheels for a good price You can also fill and paint 'em, if it bugs you... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-24-2012, 11:49 PM	#55
cardreams Registered User Join Date: Dec 2008 Location: kingston ont Canada Posts: 443	Re: Nice looking wheels for a good price hey guys was looking at getting a set of these in 18s i have a 68c-10 just cahanged it over to 5 lug what backspacing should i get to get the big lip in the back any help would be great thanks ANDY

05-25-2012, 05:34 AM	#56
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Nice looking wheels for a good price Hey Andy, I would go with the 18x8 Front / 18x9 Rear, and run a 275 tire on the rear. We are an authorized Showwheels dealer and already setup a few members on the forum here. Give me a call and I can set you up with a good price. Below is a link to the wheels on our site that show the backspacing for the different sizes. Which is a 4.5" on the front and 5.25" on the rear for the 18's, which will work on your 68 C10. Showwheels Streeter - Travis

05-25-2012, 10:31 AM	#59
Tmwoodall Registered User Join Date: Jan 2011 Location: Austin, TX Posts: 632	Re: Nice looking wheels for a good price Perfect, thans. Just skimmed your build thread and saw the other pics, looks great. Seemed nice and wide/agressive without having to tub or modify. Good little stagger too. Should be perfect/exactly what I was looking for. __________________ www.tomthetruck.blogspot.com <-- Aka build thread.

05-25-2012, 12:06 PM	#60
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Nice looking wheels for a good price I was thinking he might of had the wider axle, but after speaking with him, he has the narrower. So yes, a spacer of .75" to 1" will be needed. Regarding the 295, that is a good size for that 20x10. The 275 is a little wide for the 8.5, but could work. Just might have more tire bulge on the front than rear..... A 255 would be a better choice and what I would recommend. Travis Posted via Mobile Device

05-25-2012, 12:10 PM	#61
Tmwoodall Registered User Join Date: Jan 2011 Location: Austin, TX Posts: 632	Re: Nice looking wheels for a good price Personally, I think it looks great. Could easily go narrower and still look great, but not any wider, that's for sure. Attached Images __________________ www.tomthetruck.blogspot.com <-- Aka build thread.

05-25-2012, 09:37 PM	#62
cardreams Registered User Join Date: Dec 2008 Location: kingston ont Canada Posts: 443	Re: Nice looking wheels for a good price can someone maybe photoshop a set of these wheels on my truck for me 18s if possable please

05-25-2012, 09:52 PM	#63
tattoed71 Registered User Join Date: Jul 2011 Location: abilene,Texas Posts: 149	Re: Nice looking wheels for a good price I got at set like those but their from a company named ridler cause the logo on the streeter wheels bugged me Posted via Mobile Device __________________ paint dont make u go faster

05-26-2012, 11:53 PM	#64
cardreams Registered User Join Date: Dec 2008 Location: kingston ont Canada Posts: 443	Re: Nice looking wheels for a good price bump

05-27-2012, 12:16 AM	#66
cardreams Registered User Join Date: Dec 2008 Location: kingston ont Canada Posts: 443	Re: Nice looking wheels for a good price no lol

05-29-2012, 01:58 PM	#67
cardreams Registered User Join Date: Dec 2008 Location: kingston ont Canada Posts: 443	Re: Nice looking wheels for a good price would u guys go with 18s or 20s on my truck with that drop ????

05-29-2012, 05:42 PM	#68
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Nice looking wheels for a good price 20s all the way! 18s can look good, too. It's all about personal preference. Look around at other trucks here and see what you like better... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-13-2012, 10:02 PM	#69
cardreams Registered User Join Date: Dec 2008 Location: kingston ont Canada Posts: 443	Re: Nice looking wheels for a good price just got shipped today only 5 more days to wait lol going with 18 8 but front and 18 9 back hope they look good thanks again Travis your a great guy to deal with thanks for all the help



Register or Log In To remove these advertisements.

06-13-2012, 10:32 PM	#70
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Nice looking wheels for a good price No problem! Make sure to post some pictures when you get them on the truck. Travis Posted via Mobile Device

06-20-2012, 09:36 PM	#71
cardreams Registered User Join Date: Dec 2008 Location: kingston ont Canada Posts: 443	Re: Nice looking wheels for a good price would like to thank Travis again love thee new wheels and tires just got them today what ya think

06-20-2012, 11:33 PM	#72
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Nice looking wheels for a good price Much mo betta! Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-21-2012, 10:15 AM	#73
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Nice looking wheels for a good price Truck looks great! The polished goes well with the chrome on your truck. Love that color too!

06-21-2012, 10:57 AM	#74
E.Furgal Account Suspended Join Date: Mar 2012 Location: Abington,Ma. Posts: 87	Re: Nice looking wheels for a good price mighty cheap.. I'd want to see what type of side loading. it take before breaking.. there has been a rash of wheel breaking when loaded.. at the drags.. ripping the centers where the lugs are off the rest of the wheel..

06-21-2012, 12:12 PM	#75
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Nice looking wheels for a good price I have one word for your truck __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

Register or Log In To remove these advertisements.