Project 94 Z71 ECSB - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

98GMCSierraGuy · 08-09-2012, 02:17 PM

Good luck! Glad to hear everyone is OK. I'm rebuilding my truck after I wrecked it but it wasn't that bad.

spudz · 08-09-2012, 07:44 PM

yeah its really not worth it BUT, I have almost enough parts to do it so it will keep cost WAY down. But its gonna be alot of work. He is gonna start taking the interior out... then get bed and front clip off and then cab. Lots of work to do for sure.

98GMCSierraGuy · 08-09-2012, 07:46 PM

Yeah that would work then the only reason I restored mine was sentimental value. Good luck hope it works out.

jalopdaddy · 08-13-2012, 10:17 PM

Would have rather hit the deer than roll it but it was a good lesson learned. But like Uncole said, round 2! And round 2 is always better than round 1! Will keep updated on the truck as much as possible!
Posted via Mobile Device

spudz · 08-18-2012, 05:31 PM

he got most of the interior out and we pulled the trashed front clip off.. long road ahead of us!!

jalopdaddy · 09-17-2012, 11:46 PM

Got a 2000 Denali front clip for last week for it. Bet yall can't guess what I paid for it??
Posted via Mobile Device

jalopdaddy · 10-09-2012, 10:58 AM

Name: denali.jpg
Views: 886
Size: 29.6 KB

this is it. Guess how much theyre worth and how much i got it for..

bufmatmuslepants · 10-10-2012, 01:33 PM

You must suck at driving haha

75ChevyGuy · 10-10-2012, 04:22 PM

Quote:

Originally Posted by jalopdaddy

Attachment 996363
this is it. Guess how much theyre worth and how much i got it for..

I'm gonna guess you scored it for around 350-400 bucks.

jalopdaddy · 10-16-2012, 07:21 PM

Quote:

Originally Posted by bufmatmuslepants

You must suck at driving haha

And you sir, must suck dick get the **** off my page if your gonna be an asshole
Posted via Mobile Device

jalopdaddy · 10-16-2012, 07:22 PM

Quote:

Originally Posted by 75ChevyGuy

I'm gonna guess you scored it for around 350-400 bucks.

I got it for 300!
Posted via Mobile Device

jalopdaddy · 02-25-2013, 05:53 PM

This is the parts truck I bought. I took the cab off of it and put it on my original frame. Im still using the dash out of my truck because the wiring is better on it.
Name: 2013-01-29_17-21-11_994.jpg
Views: 1291
Size: 44.4 KB

Name: 2013-01-29_17-21-11_994.jpg
Views: 1291
Size: 44.4 KB

jalopdaddy · 02-25-2013, 06:03 PM

more pics of the truck and where I took the dash out.
[ATTACH] Name: 2012-12-31_13-27-31_98.jpg
Views: 555
Size: 44.9 KB

[/ATTACH]

jalopdaddy · 02-25-2013, 06:09 PM

heres pics of the frame with the bed, cab, and front clip off of it. put cab back on my original frame and where I put dash back in, hooked up the electrical, brakes, etc.
Name: 2013-02-02_15-21-26_25.jpg
Views: 574
Size: 57.4 KB

Name: 2013-02-02_15-21-26_25.jpg
Views: 574
Size: 57.4 KB

[ATTACH]

Name: 2013-02-19_16-58-12_622.jpg
Views: 645
Size: 26.2 KB

[/ATTACH]

jalopdaddy · 02-25-2013, 06:17 PM

and heres the denali front clip. not looking all great right now. have to get doors and bumper on and take the cladding/fender flares off. Cranked it up yesterday and it still ran like a champ! I also have a bed for it off of another parts truck that's not step side. should be ready for paint soon.... again.. lol
Name: 2013-02-23_18-23-20_561.jpg
Views: 614
Size: 13.0 KB

Name: 2013-02-23_18-23-20_561.jpg
Views: 614
Size: 13.0 KB

loudnlifted88 · 02-26-2013, 12:30 PM

looking good man

jalopdaddy · 10-15-2013, 12:02 AM

okay everybody, im sorry about not giving updates lately but i got the truck put back together, painted and on the road! heres some more pics guys. dont think i did too bad to be 17 and put the whole truck together by myself. got a billet grill for it, replaced front end suspension parts all MOOG parts ball joints idler arm idler arm bracket and pitman arm. its a denali front clip but with the billrt grill in it i just call it the Caddy Truck!

Name: 2013-04-07_16-31-29_181.jpg
Views: 623
Size: 44.7 KB

Name: 2013-04-10_16-57-14_150.jpg
Views: 444
Size: 26.2 KB

Name: 2013-04-10_17-57-21_412.jpg
Views: 423
Size: 28.8 KB

Name: 2013-05-12_18-29-11_980.jpg
Views: 770
Size: 39.1 KB

Name: IMG_4104456115321.jpg
Views: 1929
Size: 42.2 KB

jalopdaddy · 10-15-2013, 12:09 AM

i dont know if i thould use these 18 inch Cadillac wheels or the ones that are on there. what you guys think????
Name: IMG_20131014_160438_0.jpg
Views: 466
Size: 81.2 KB

Name: IMG_20131014_160438_0.jpg
Views: 466
Size: 81.2 KB

jalopdaddy · 10-15-2013, 12:12 AM

a pic that my buddy took of my truck goin down the road and a still pic..

Name: IMG_20131011_131903_0.jpg
Views: 545
Size: 71.9 KB

Name: PART_1381702594119.jpg
Views: 426
Size: 67.4 KB

75ChevyGuy · 10-15-2013, 10:43 PM

Personally I say use the Cadillac wheels. It will make it look more like a caddy!

chevyboy73 · 10-17-2013, 08:18 PM

wow sweet truck! i love the caddy front end! i'm 15, starting like you did, have a RCSB that i'm buildin!

08-09-2012, 02:17 PM	#51
98GMCSierraGuy Registered User Join Date: May 2012 Location: Charleston, South Carolina Posts: 266	Re: Project 94 Z71 ECSB Good luck! Glad to hear everyone is OK. I'm rebuilding my truck after I wrecked it but it wasn't that bad.

08-09-2012, 07:44 PM	#52
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Project 94 Z71 ECSB yeah its really not worth it BUT, I have almost enough parts to do it so it will keep cost WAY down. But its gonna be alot of work. He is gonna start taking the interior out... then get bed and front clip off and then cab. Lots of work to do for sure. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

08-09-2012, 07:46 PM	#53
98GMCSierraGuy Registered User Join Date: May 2012 Location: Charleston, South Carolina Posts: 266	Re: Project 94 Z71 ECSB Yeah that would work then the only reason I restored mine was sentimental value. Good luck hope it works out.

08-13-2012, 10:17 PM	#54
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB Would have rather hit the deer than roll it but it was a good lesson learned. But like Uncole said, round 2! And round 2 is always better than round 1! Will keep updated on the truck as much as possible! Posted via Mobile Device __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

08-18-2012, 05:31 PM	#55
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Project 94 Z71 ECSB he got most of the interior out and we pulled the trashed front clip off.. long road ahead of us!! Attached Images __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

09-17-2012, 11:46 PM	#56
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB Got a 2000 Denali front clip for last week for it. Bet yall can't guess what I paid for it?? Posted via Mobile Device __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

10-09-2012, 10:58 AM	#57
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB this is it. Guess how much theyre worth and how much i got it for.. __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

10-10-2012, 01:33 PM	#58
bufmatmuslepants Junior Member Join Date: May 2007 Location: Hampstead, NC Posts: 313	Re: Project 94 Z71 ECSB You must suck at driving haha __________________ 1979 K10 reg cab short bed 33x12.50s - GONE 1988 4x4 reg cab long bed 337k miles - GONE 1995 Z71 GU6 G80 F44 ext cab short bed 149k 305/70/16s - GONE 1995 NZZ GT4 2dr Tahoe 3" lift 14 bolt sf 155k 305/70/16s - GONE 1994 Z28 M6 1995 Z71 GT4 G80 ext cab short bed 215k GONE 1997 GT4 G80 Yukon 4 door leather, sunroof 168k miles GONE 2003 Avalanche Z71 GT4 G80 165k miles

02-25-2013, 05:53 PM	#62
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB This is the parts truck I bought. I took the cab off of it and put it on my original frame. Im still using the dash out of my truck because the wiring is better on it. __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

02-25-2013, 06:03 PM	#63
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB more pics of the truck and where I took the dash out. [ATTACH][/ATTACH] Attached Images __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

02-25-2013, 06:09 PM	#64
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB heres pics of the frame with the bed, cab, and front clip off of it. put cab back on my original frame and where I put dash back in, hooked up the electrical, brakes, etc. [ATTACH][/ATTACH] Attached Images __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

02-25-2013, 06:17 PM	#65
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB and heres the denali front clip. not looking all great right now. have to get doors and bumper on and take the cladding/fender flares off. Cranked it up yesterday and it still ran like a champ! I also have a bed for it off of another parts truck that's not step side. should be ready for paint soon.... again.. lol __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

02-26-2013, 12:30 PM	#66
loudnlifted88 Registered User Join Date: Jan 2010 Location: Wales,Maine Posts: 776	Re: Project 94 Z71 ECSB looking good man __________________ IM ONLY 18 AND LOVIN IT IF MUD AINT FLYIN YOU AINT TRYIN! 1badgmc- Just think. Someone worked hard to make it look that bad. 1988 chevy stepside 305 five speed Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=383945 1994 GMC ext. cab short box 350 auto Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=438873 1996 GMC 2500 ECSB 454 4l80e: build thread http://www.gmt400.com/forum/showthre...gmc-2500-build 1998 GMC K-1500 ECSB 305 auto partd truck 1999 GMC K2500 suburban 350 4x4 Dads project 1981 Corvette 350 auto Also Dads project 1989 Corvette 350 auto ^^ 1998 GMC K1500 ecsb 305 auto Brothers project

10-15-2013, 12:02 AM	#67
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB okay everybody, im sorry about not giving updates lately but i got the truck put back together, painted and on the road! heres some more pics guys. dont think i did too bad to be 17 and put the whole truck together by myself. got a billet grill for it, replaced front end suspension parts all MOOG parts ball joints idler arm idler arm bracket and pitman arm. its a denali front clip but with the billrt grill in it i just call it the Caddy Truck! __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

10-15-2013, 12:09 AM	#68
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB i dont know if i thould use these 18 inch Cadillac wheels or the ones that are on there. what you guys think???? __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!



Register or Log In To remove these advertisements.

10-15-2013, 12:12 AM	#69
jalopdaddy Registered User Join Date: Dec 2010 Location: Branchville, SC Posts: 27	Re: Project 94 Z71 ECSB a pic that my buddy took of my truck goin down the road and a still pic.. __________________ Branchville Mud Sluts Hittin' every hole. No worries, we always pull out!

10-15-2013, 10:43 PM	#70
75ChevyGuy GM Parts Guy Join Date: Jan 2011 Location: Attleboro MA Posts: 375	Re: Project 94 Z71 ECSB Personally I say use the Cadillac wheels. It will make it look more like a caddy! __________________ 1975 Chevrolet C-10 Custom Deluxe (DD/WIP) 1989 Chevrolet C1500 reg cab stepside (Winter Truck) 1977 Harley Davidson XLH 1000 (Summer Cruiser)

10-17-2013, 08:18 PM	#71
chevyboy73 Registered User Join Date: Sep 2012 Location: Sun Prairie, WI Posts: 131	Re: Project 94 Z71 ECSB wow sweet truck! i love the caddy front end! i'm 15, starting like you did, have a RCSB that i'm buildin! __________________ 2011 Silverado ECSB LT 2000 Silverado RCSB 2WD super bad habit of not owning a vehicle for a long time

Register or Log In To remove these advertisements.