TX Parting out '72 GMC 3/4 ton - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FIREBALL** · 01-18-2011, 03:29 PM

hmmm, that s nice truck for parts

**FIREBALL** · 01-18-2011, 03:33 PM

intersted in the gas pedal setup...... pm'd ya as well...

**4X4GMC1972** · 01-18-2011, 03:49 PM

If the other guy doesnt want it....Its yours. I can sell it with the cable but not the carb bracket.

**Dieselwrencher** · 01-18-2011, 04:05 PM

I'll pass on both, gas pedal and steering wheel. Thanks Ryan.

apollos1970 · 01-18-2011, 06:15 PM

i wanted the gas pedal assembly its $25 shipped you said right

mhs1954 · 01-18-2011, 07:15 PM

I will pass on the ebrake.
Thanks
Mike

**FIREBALL** · 01-18-2011, 11:06 PM

??? well if i'm up next let me know if not let me know regardless....

**4X4GMC1972** · 01-19-2011, 01:28 AM

Gas pedal sold to apollos1970. thanks

**4X4GMC1972** · 01-19-2011, 01:30 AM

More cab pics. a little bit of rust on lower kick panels

**4X4GMC1972** · 01-19-2011, 01:33 AM

No rust found underneath.

**FIREBALL** · 01-19-2011, 01:35 AM

thanks at least that got settled (lol) ......free bump!

madchopper · 01-19-2011, 01:38 AM

Do you still have the seat? Is it on that folds down or is it solid like the one in my 67?

**4X4GMC1972** · 01-19-2011, 01:39 AM

Quote:

Originally Posted by too much stuff

More interested in the bezel if it is nice. The gauges look faded out. Let me know if you want to sell seperate and condition, and how much for the sierra emblems if you don't want to seperate. Thanks, Eric

There was a crack in the bezel. The emblems are real nice. Not pitted. How's $35.00?

**4X4GMC1972** · 01-19-2011, 01:44 AM

Quote:

Originally Posted by 1970greenc10

any pics or price on the front bumper yet?
Thanks,Marty

$75.00. It looks like it will clean up nice. If you are interested, I will check the shipping price.

**4X4GMC1972** · 01-19-2011, 01:45 AM

Quote:

Originally Posted by madchopper

Do you still have the seat? Is it on that folds down or is it solid like the one in my 67?

The seat is spoken for. Thanks!

**4X4GMC1972** · 01-19-2011, 01:53 AM

Quote:

Originally Posted by projectjimmie68

How about the transmission lines? How much plus shipping to zip 32136? Thanks Projectjimmie

I am assuming shipping would be high. $45.00 shipped? Transmission is $50.00 local pickup. Was working good when pulled.

**too much stuff** · 01-19-2011, 02:01 AM

Pm sent on the emblems.

petey-pablo · 01-19-2011, 08:53 AM

Quote:

Originally Posted by 4X4GMC1972

$100.00 shipped for the wiring. The defrost vents are broken.

I will have to pass on the wiring for now thanks. Unfortunately I am undecided if I want to go OEM or with an updated wiring & fuse block like M & H or Painless with spade fuses or just fix mine

Sorry for the inconvenience.

Cyclone44 · 01-19-2011, 09:34 AM

I will pass on the shift linkage, it's not all there!...Thanks

**4X4GMC1972** · 01-19-2011, 11:58 AM

Quote:

Originally Posted by Cyclone44

I will pass on the shift linkage, it's not all there!...Thanks

If you need the part that is on the transmission, I have that.

**1970greenc10** · 01-19-2011, 01:09 PM

definetly interested in the front bumper that would be great if you could check the shipping to 14075 and send me a pm.
Thanks,Marty

Ozark Tim · 01-19-2011, 06:50 PM

Is that dash bezel a green original?
It looks nice. Do you still have it?
Thanks, Tim

**4X4GMC1972** · 01-19-2011, 07:41 PM

Quote:

Originally Posted by Ozark Tim

Is that dash bezel a green original?
It looks nice. Do you still have it?
Thanks, Tim

The bezel has about a 1" long crack near a screw hole.

Ozark Tim · 01-20-2011, 02:01 PM

Thats too bad!
Thanks for the info.
Tim

**70STOVEBOLT** · 01-20-2011, 02:50 PM

Is the lighter sold? If not, how much for that and the deluxe headlight and wiper knobs, shipped to 46562?

Thanks,
Mark

01-18-2011, 03:29 PM	#51
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: Parting out '72 GMC 3/4 ton hmmm, that s nice truck for parts __________________ Live life one day at a time! Last edited by FIREBALL; 01-18-2011 at 03:30 PM.

01-18-2011, 03:33 PM	#52
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: Parting out '72 GMC 3/4 ton intersted in the gas pedal setup...... pm'd ya as well... __________________ Live life one day at a time!

01-18-2011, 03:49 PM	#53
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting out '72 GMC 3/4 ton If the other guy doesnt want it....Its yours. I can sell it with the cable but not the carb bracket. __________________ 1978 Dodge Omni

01-18-2011, 04:05 PM	#54
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Parting out '72 GMC 3/4 ton I'll pass on both, gas pedal and steering wheel. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-18-2011, 06:15 PM	#55
apollos1970 Registered User Join Date: Oct 2009 Location: Fort Lauderdale, FL Posts: 70	Re: Parting out '72 GMC 3/4 ton i wanted the gas pedal assembly its $25 shipped you said right __________________ 1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver

01-18-2011, 07:15 PM	#56
mhs1954 Registered User Join Date: Oct 2010 Location: Las Vegas, NV Posts: 58	Re: Parting out '72 GMC 3/4 ton I will pass on the ebrake. Thanks Mike

01-18-2011, 11:06 PM	#57
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: Parting out '72 GMC 3/4 ton ??? well if i'm up next let me know if not let me know regardless.... __________________ Live life one day at a time! Last edited by FIREBALL; 01-18-2011 at 11:06 PM.

01-19-2011, 01:28 AM	#58
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting out '72 GMC 3/4 ton Gas pedal sold to apollos1970. thanks __________________ 1978 Dodge Omni

01-19-2011, 01:30 AM	#59
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting out '72 GMC 3/4 ton More cab pics. a little bit of rust on lower kick panels Attached Images __________________ 1978 Dodge Omni

01-19-2011, 01:33 AM	#60
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting out '72 GMC 3/4 ton No rust found underneath. Attached Images __________________ 1978 Dodge Omni

01-19-2011, 01:35 AM	#61
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: Parting out '72 GMC 3/4 ton thanks at least that got settled (lol) ......free bump! __________________ Live life one day at a time!

01-19-2011, 01:38 AM	#62
madchopper Registered User Join Date: Jun 2008 Location: Colbert, Wa Posts: 39	Re: Parting out '72 GMC 3/4 ton Do you still have the seat? Is it on that folds down or is it solid like the one in my 67?

01-19-2011, 02:01 AM	#67
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	Re: Parting out '72 GMC 3/4 ton Pm sent on the emblems. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-19-2011, 09:34 AM	#69
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out '72 GMC 3/4 ton I will pass on the shift linkage, it's not all there!...Thanks

01-19-2011, 01:09 PM	#71
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: Parting out '72 GMC 3/4 ton definetly interested in the front bumper that would be great if you could check the shipping to 14075 and send me a pm. Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado Last edited by 1970greenc10; 01-19-2011 at 01:10 PM.



Register or Log In To remove these advertisements.

01-19-2011, 06:50 PM	#72
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Parting out '72 GMC 3/4 ton Is that dash bezel a green original? It looks nice. Do you still have it? Thanks, Tim

01-20-2011, 02:01 PM	#74
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Parting out '72 GMC 3/4 ton Thats too bad! Thanks for the info. Tim

01-20-2011, 02:50 PM	#75
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Parting out '72 GMC 3/4 ton Is the lighter sold? If not, how much for that and the deluxe headlight and wiper knobs, shipped to 46562? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.