MI Parting out 71 CST 3/4 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68350** · 02-28-2011, 01:20 PM

I will for sure take the inner grille if you can get it here in one piece haha. Also, lmk a price for the marker lights. thanks

Games70C10 · 02-28-2011, 03:30 PM

I am interested in the Accelerator Pedal assy. linkage and throttle cable if it is still available.

Ole69chev · 02-28-2011, 06:16 PM

Games- I still have to pull it but its available and I will let you know a price when I look it over and make sure its all good.

Ole69chev · 02-28-2011, 06:17 PM

Quote:

Originally Posted by 68350

I will for sure take the inner grille if you can get it here in one piece haha. Also, lmk a price for the marker lights. thanks

That may be the tricky part ha. PM sent

**70STOVEBOLT** · 02-28-2011, 06:21 PM

Is the core support rust-free? If so I would like to see some more pics, and also, how about the under dash wiring harness?

Thanks,
Mark

Ole69chev · 02-28-2011, 06:25 PM

Quote:

Originally Posted by 70STOVEBOLT

Is the core support rust-free? If so I would like to see some more pics, and also, how about the under dash wiring harness?

Thanks,
Mark

I believe the core support is in good shape its still at my shop and the wiring harness is complete and not all hacked up. Ill let you know a price when I head back either tonight or tomorrow.

Games70C10 · 03-01-2011, 02:43 AM

Quote:

Originally Posted by Ole69chev

Games- I still have to pull it but its available and I will let you know a price when I look it over and make sure its all good.

Cool. Any chance you could include a pic with the price? Please PM me with the details. I am trying to correct my Coat hanger repaired linkage with a cable type linkage.

**70STOVEBOLT** · 03-01-2011, 01:50 PM

Quote:

Originally Posted by Ole69chev

I believe the core support is in good shape its still at my shop and the wiring harness is complete and not all hacked up. Ill let you know a price when I head back either tonight or tomorrow.

Sounds good, no rush.

Thanks,
Mark

**Dave** · 03-01-2011, 02:44 PM

Interested in the woodgrain dash bezel and glovebox door with emblem if it gets to me, let me know, thanks.

**too much stuff** · 03-01-2011, 03:37 PM

Payment sent for gauges and glove box door.
Eric

avilahdz01 · 03-02-2011, 07:05 PM

payment has been sent

cheyenne402 · 03-19-2011, 09:25 AM

Interested in the hood and seat. I live in mid-Michigan. Pick up would be a snap.

cheyenne402 · 03-19-2011, 09:26 AM

How much for wheels/tires?

**FL71C10** · 03-19-2011, 11:16 AM

I am interested in the crank and water pump pulleys, alt brackets, ps pump, brackets, and hoses, if available. Could you give me a price shipped to 32803?

Thanks!

fwells67 · 03-19-2011, 12:06 PM

interested in all the emblems,. could you post a pic

fwells67 · 03-19-2011, 12:07 PM

and the tailgate

**70STOVEBOLT** · 03-19-2011, 12:27 PM

Quote:

Originally Posted by Ole69chev

I believe the core support is in good shape its still at my shop and the wiring harness is complete and not all hacked up. Ill let you know a price when I head back either tonight or tomorrow.

Any word on these parts? Not in a hurry but it's been a while.

Thanks,
Mark

hector68 · 03-19-2011, 12:43 PM

interested in tailgate. how much is the tailgate shipped to 77521. thanks

CaptRMW · 03-20-2011, 09:45 AM

Quote:

Originally Posted by CaptRMW

Interested in the wiper arms if they have good chrome and don't have bite marks from the plier removal technique, shipped to 34689 Thanks, Roger

Anyone with a nice pair or even single wiper arm?

Ole69chev · 03-20-2011, 10:53 PM

First off sorry everybody I have been extremely busy. I work two jobs one being road construction during the day and I work in a call center at night and somewhere around there I have a girlfriend and 2 dogs who want my time. Then the army reserve also will demand some of my time giving me even less for projects and hobbies but its all for the bigger picture. Ok enough babling. I have some updates, I have the wiper arms and will post pics later today.
Cheyenne402 I will let the hood and seat go for 150 as for the wheels and tires I beleive someone has claimed them but I beleive them to be split wheels which he did not want so I will get back with him then you. Ill look into shipping the gate might be a bit pricey but Ill get it measured out and weighed and see how much they are asking. Haha Im almost ready to just let people come on over and pull what they want. I found the antenna aswell not sure if its original its collapsable...not sure if thats normal?? Alright I need to eat some dinner then I will upload pics. Again I didnt mean to leave you all in the dark Ill try better to keep everyone in the loop.

Stricklinator · 03-21-2011, 04:53 PM

I'm interested in the driver's side upper and lower trim shipped to 92027.

Thanks,

Paul
Posted via Mobile Device

**70STOVEBOLT** · 03-28-2011, 05:13 PM

Interested in the antenna and the under dash wiring harness and the core support, would like to see some pics.

Thanks,
Mark

jackitup300 · 04-01-2011, 10:03 PM

interested in cab. pm sent.

feller · 04-01-2011, 10:23 PM

how about the aux gas tanks?? are they still there are they good?? do ya want to get rid of them? if so i might be interested in the drivers side

cheyenne402 · 05-18-2011, 02:50 AM

Still waiting for message about hood. Still available?

02-28-2011, 01:20 PM	#51
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting out 71 CST 3/4 I will for sure take the inner grille if you can get it here in one piece haha. Also, lmk a price for the marker lights. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

02-28-2011, 03:30 PM	#52
Games70C10 Registered User Join Date: Feb 2011 Location: Plano Posts: 4	Re: Parting out 71 CST 3/4 I am interested in the Accelerator Pedal assy. linkage and throttle cable if it is still available.

02-28-2011, 06:16 PM	#53
Ole69chev Registered User Join Date: Oct 2008 Location: Grandrapids, MI Posts: 35	Re: Parting out 71 CST 3/4 Games- I still have to pull it but its available and I will let you know a price when I look it over and make sure its all good.

02-28-2011, 06:21 PM	#55
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,547	Re: Parting out 71 CST 3/4 Is the core support rust-free? If so I would like to see some more pics, and also, how about the under dash wiring harness? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-01-2011, 02:44 PM	#59
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,404	Re: Parting out 71 CST 3/4 Interested in the woodgrain dash bezel and glovebox door with emblem if it gets to me, let me know, thanks.

03-01-2011, 03:37 PM	#60
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,855	Re: Parting out 71 CST 3/4 Payment sent for gauges and glove box door. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-02-2011, 07:05 PM	#61
avilahdz01 Registered User Join Date: Apr 2010 Location: van nuys ca Posts: 21	Re: Parting out 71 CST 3/4 payment has been sent

03-19-2011, 09:25 AM	#62
cheyenne402 Registered User Join Date: Jul 2005 Location: Owosso, Michigan Posts: 783	Re: Parting out 71 CST 3/4 Interested in the hood and seat. I live in mid-Michigan. Pick up would be a snap.

03-19-2011, 09:26 AM	#63
cheyenne402 Registered User Join Date: Jul 2005 Location: Owosso, Michigan Posts: 783	Re: Parting out 71 CST 3/4 How much for wheels/tires?

03-19-2011, 11:16 AM	#64
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: Parting out 71 CST 3/4 I am interested in the crank and water pump pulleys, alt brackets, ps pump, brackets, and hoses, if available. Could you give me a price shipped to 32803? Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

03-19-2011, 12:06 PM	#65
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: Parting out 71 CST 3/4 interested in all the emblems,. could you post a pic

03-19-2011, 12:07 PM	#66
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: Parting out 71 CST 3/4 and the tailgate

03-19-2011, 12:43 PM	#68
hector68 Registered User Join Date: Feb 2011 Location: baytown, tx Posts: 84	Re: Parting out 71 CST 3/4 interested in tailgate. how much is the tailgate shipped to 77521. thanks

03-20-2011, 10:53 PM	#70
Ole69chev Registered User Join Date: Oct 2008 Location: Grandrapids, MI Posts: 35	Re: Parting out 71 CST 3/4 First off sorry everybody I have been extremely busy. I work two jobs one being road construction during the day and I work in a call center at night and somewhere around there I have a girlfriend and 2 dogs who want my time. Then the army reserve also will demand some of my time giving me even less for projects and hobbies but its all for the bigger picture. Ok enough babling. I have some updates, I have the wiper arms and will post pics later today. Cheyenne402 I will let the hood and seat go for 150 as for the wheels and tires I beleive someone has claimed them but I beleive them to be split wheels which he did not want so I will get back with him then you. Ill look into shipping the gate might be a bit pricey but Ill get it measured out and weighed and see how much they are asking. Haha Im almost ready to just let people come on over and pull what they want. I found the antenna aswell not sure if its original its collapsable...not sure if thats normal?? Alright I need to eat some dinner then I will upload pics. Again I didnt mean to leave you all in the dark Ill try better to keep everyone in the loop.

03-21-2011, 04:53 PM	#71
Stricklinator Registered User Join Date: Feb 2011 Location: Murrieta, California Posts: 234	Re: Parting out 71 CST 3/4 I'm interested in the driver's side upper and lower trim shipped to 92027. Thanks, Paul Posted via Mobile Device



Register or Log In To remove these advertisements.

03-28-2011, 05:13 PM	#72
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,547	Re: Parting out 71 CST 3/4 Interested in the antenna and the under dash wiring harness and the core support, would like to see some pics. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-01-2011, 10:03 PM	#73
jackitup300 Registered User Join Date: Nov 2007 Location: Cedar Springs, MI Posts: 9	Re: Parting out 71 CST 3/4 interested in cab. pm sent. __________________ 1970 3/4 ton. dana 44 front, eaton rear. 4.10s. sbc with some goodies and predator carb. big block roller motor in the works. built th350 trans. np205 transfer case. 7" suspension lift w/ 36" super swamper sx's.

04-01-2011, 10:23 PM	#74
feller Registered User Join Date: Feb 2011 Location: madison, IN. Posts: 484	Re: Parting out 71 CST 3/4 how about the aux gas tanks?? are they still there are they good?? do ya want to get rid of them? if so i might be interested in the drivers side

05-18-2011, 02:50 AM	#75
cheyenne402 Registered User Join Date: Jul 2005 Location: Owosso, Michigan Posts: 783	Re: Parting out 71 CST 3/4 Still waiting for message about hood. Still available?

Register or Log In To remove these advertisements.