First Time On The Board - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 Blazer CST · 04-18-2011, 10:11 PM

Got our blazer home about 10:30pm Sunday night. I had to drive it home from Yakima with the top off. It was quite cold! Now the fun begins with the new shiny stuff!

red71cheyenne · 04-19-2011, 10:42 PM

Great Progress and never apologize about pics! We love them, the more the better. Looks like she's going to be a nice Blazer. I bet that ride home from Yakima was chilly!

72 Blazer CST · 04-22-2011, 09:05 PM

The Blazers in the garage and were doing all we can not to put everything on it. Trying to let the paint cure some more!!

72 Blazer CST · 04-25-2011, 02:47 PM

I'm working on priming and painting all the bumper brackets and some other parts now. Hope to start putting it all back together within a few days. Won't get much done this weekend, were entering our bike in a car and bike show Saturday. I will add some pictures once we start putting parts on the Blazer.

FRENCHBLUE72 · 04-29-2011, 05:29 PM

Gonna be a nice blazer when its done congrats.

72 Blazer CST · 05-01-2011, 11:35 PM

We finally got some work done on the blazer today. We did a little painting of the hitch and the custom gas tank to clean things up a little bit.

72 Blazer CST · 05-01-2011, 11:39 PM

Then we started putting the fun stuff on!

72 Blazer CST · 05-01-2011, 11:45 PM

In the garage for the night. Not bad for a days work!

72 Blazer CST · 05-11-2011, 09:19 AM

Spent some time this weekend working on the front end with my Dad. Ran in to plenty of problems but ended up with a good end result complete with factory rivets. Waiting on some upper bumper brackets to get the front finished up. Next up, start drilling all the holes everywhere that I need. Fingers crossed on those!

72 Blazer CST · 05-16-2011, 12:59 PM

We got our blazer back last night from the body shop. It was there getting the final touch ups done and getting a buff job. It looks great! Time to put all the trim and goodies back on it.

72 Blazer CST · 05-16-2011, 01:22 PM

Anybody know how to move this to the blazers projects and build section?

72 Blazer CST · 05-16-2011, 05:47 PM

A couple pics after the final touch up and buff.

69-72 · 05-18-2011, 09:26 AM

Very nice and very fast to get the work done. Do you happen to know the paint code on the on the option sheet. My Jimmy is supposed to be med red and I have never seen that color on another truck before.

72 Blazer CST · 05-19-2011, 05:22 PM

I don't know the code on the original option sheet. I kinda left this one up to my painter.

72 Blazer CST · 06-03-2011, 09:59 PM

Finally got back to work on the blazer, here's where we're at after a day and a half.

72 Blazer CST · 06-03-2011, 10:07 PM

More pictures.

72 Blazer CST · 06-03-2011, 10:09 PM

One more!

dan42 · 06-04-2011, 01:20 AM

Looking very nice. Your parts Blazer looks like one I had back in '81 - I sold it when I lived in Utah, traded it in for a Nissan pickup - kick myself to this day for doing it, but it really wasn't practical for me at the time. Keep the pictures coming, we love to see the progress.

72 Blazer CST · 07-02-2011, 01:12 PM

Its finally done!!

72 Blazer CST · 07-02-2011, 01:16 PM

I may add some rear side panels later and I am going to add a radio I found that has the knobs that match the other dash knobs.

TexasJimmy · 07-03-2011, 12:12 PM

Very nice!!!

Where did you get that center console. It looks brand new.

Tim

72 Blazer CST · 07-03-2011, 12:17 PM

Thank you. It was the original console. I just bought a new stainless plate where the ashtray sits and I bought a new ashtray as well. I think I just got lucky with it.

TexasJimmy · 07-03-2011, 12:30 PM

Quote:

Originally Posted by 72 Blazer CST

Thank you. It was the original console. I just bought a new stainless plate where the ashtray sits and I bought a new ashtray as well. I think I just got lucky with it.

Nice, you got very lucky.

Tim

04-18-2011, 10:11 PM	#51
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board Got our blazer home about 10:30pm Sunday night. I had to drive it home from Yakima with the top off. It was quite cold! Now the fun begins with the new shiny stuff! Attached Images

04-19-2011, 10:42 PM	#52
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: First Time On The Board Great Progress and never apologize about pics! We love them, the more the better. Looks like she's going to be a nice Blazer. I bet that ride home from Yakima was chilly! __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

04-22-2011, 09:05 PM	#53
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board The Blazers in the garage and were doing all we can not to put everything on it. Trying to let the paint cure some more!!

04-25-2011, 02:47 PM	#54
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board I'm working on priming and painting all the bumper brackets and some other parts now. Hope to start putting it all back together within a few days. Won't get much done this weekend, were entering our bike in a car and bike show Saturday. I will add some pictures once we start putting parts on the Blazer.

04-29-2011, 05:29 PM	#55
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: First Time On The Board Gonna be a nice blazer when its done congrats. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-01-2011, 11:35 PM	#56
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board We finally got some work done on the blazer today. We did a little painting of the hitch and the custom gas tank to clean things up a little bit. Attached Images

05-01-2011, 11:39 PM	#57
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board Then we started putting the fun stuff on! Attached Images

05-01-2011, 11:45 PM	#58
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board In the garage for the night. Not bad for a days work! Attached Images

05-11-2011, 09:19 AM	#59
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board Spent some time this weekend working on the front end with my Dad. Ran in to plenty of problems but ended up with a good end result complete with factory rivets. Waiting on some upper bumper brackets to get the front finished up. Next up, start drilling all the holes everywhere that I need. Fingers crossed on those! Attached Images

05-16-2011, 12:59 PM	#60
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board We got our blazer back last night from the body shop. It was there getting the final touch ups done and getting a buff job. It looks great! Time to put all the trim and goodies back on it.

05-16-2011, 01:22 PM	#61
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board Anybody know how to move this to the blazers projects and build section?

05-16-2011, 05:47 PM	#62
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board A couple pics after the final touch up and buff. Attached Images

05-18-2011, 09:26 AM	#63
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: First Time On The Board Very nice and very fast to get the work done. Do you happen to know the paint code on the on the option sheet. My Jimmy is supposed to be med red and I have never seen that color on another truck before. __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

05-19-2011, 05:22 PM	#64
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board I don't know the code on the original option sheet. I kinda left this one up to my painter.

06-03-2011, 09:59 PM	#65
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board Finally got back to work on the blazer, here's where we're at after a day and a half. Attached Images



Register or Log In To remove these advertisements.

06-03-2011, 10:07 PM	#66
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board More pictures. Attached Images

06-03-2011, 10:09 PM	#67
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board One more! Attached Images

06-04-2011, 01:20 AM	#68
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: First Time On The Board Looking very nice. Your parts Blazer looks like one I had back in '81 - I sold it when I lived in Utah, traded it in for a Nissan pickup - kick myself to this day for doing it, but it really wasn't practical for me at the time. Keep the pictures coming, we love to see the progress. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

07-02-2011, 01:12 PM	#69
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board Its finally done!! Attached Images

07-02-2011, 01:16 PM	#70
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board I may add some rear side panels later and I am going to add a radio I found that has the knobs that match the other dash knobs. Attached Images

07-03-2011, 12:12 PM	#71
TexasJimmy Registered User Join Date: Feb 2011 Location: Friendswood,Texas Posts: 238	Re: First Time On The Board Very nice!!! Where did you get that center console. It looks brand new. Tim __________________ "It is, what it is" K5 NV 71' Blazer CST 84' GMC Jimmy-SOLD 2008 Suburban LTZ

07-03-2011, 12:17 PM	#72
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: First Time On The Board Thank you. It was the original console. I just bought a new stainless plate where the ashtray sits and I bought a new ashtray as well. I think I just got lucky with it.

Register or Log In To remove these advertisements.