IL Parting 1986 K30 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

F-85 · 04-02-2011, 10:01 PM

Quote:

Originally Posted by K30_dump

Hello again,

I know theres a line for the cab trim, but any idea on shipping cost to 17740?

Thanks,

Joe

P.S. - Front bumper brackets? Assuming they'll mount a '73-'80 bumper to an '84 frame. I scrapped the brackets with the '84 bumper and now have angled frame horns

...

Im still waiting to hear back on the trim.

I dont think the brackets would work. I had a 77 c10 and tried putting on a 85 front bumper and had problems with the brackets. I dont remember how i made it work. But i had both sets and i did make it work. All i have is the 2 outside brackets and they are in good shape.

F-85 · 04-02-2011, 10:41 PM

Quote:

Originally Posted by ScottH

does it have a rear sport bumper? If it does how much for the bumper brackets?
Also need an interior light lense if u have one, and what shape is the dashpad in?

Thanks
Scott

Gonna have to wait one more day on the bumper brackets. I have a stripped nut on both. Im gonna have to cut the nuts off. Ill try and get it done tomorrow and get you the quote.

F-85 · 04-02-2011, 10:43 PM

Quote:

Originally Posted by bikes&bowties

How much for the steering box shipped for 98848? Flat rate box?
Posted via Mobile Device

The box wouldnt fit in a USPS flatrate box. It heavy. Its $50 just for the shipping to you. I could take the pitman arm off and try and make the box smaller. but the shipping is still gonna be high. Let me know.

CORSAIR · 04-02-2011, 10:47 PM

Any cost on the items I asked about?

F-85 · 04-02-2011, 10:48 PM

Quote:

Originally Posted by CORSAIR

I am interested in the following if not spoken for
1) dash pad
2) transfer case floor boot/trim
3) seat belts

Shipped to Las vegas 89118

Thanks,
Fred

Quote:

Originally Posted by CORSAIR

I saw a few more things
Rear view mirror
door sill mouldings
Door panels (if manual windows)

If nobody wants the dash pad I would like it but would like to see cracks I need a daily driver and I will put a dash cover over it. Make me a package deal???
(sorry for the two post)

Thanks,
Fred

Hey Fred

Dash pad is junk sorry. The door panels are ok some scratches and faded. But they are red. The doors were off a different truck. They are manual though. Let me know. And ill get a shipping quote for what you want.

CORSAIR · 04-02-2011, 11:17 PM

Can you let me know $$ with shipping I want to get this handled??
seat belts
Transfer case trim
Red door panels (red is ok)

Thanks,
CORSAIR

F-85 · 04-03-2011, 07:10 AM

Quote:

Originally Posted by CORSAIR

Can you let me know $$ with shipping I want to get this handled??
seat belts
Transfer case trim
Red door panels (red is ok)

Thanks,
CORSAIR

Ok ill get you a price and shipping quote this morning.

Josh

GmtGmt · 04-03-2011, 08:09 AM

the complete wiring harness how the condtion on it?

F-85 · 04-03-2011, 08:39 AM

Quote:

Originally Posted by GmtGmt

the complete wiring harness how the condtion on it?

Its in good shape. Complete and nothing burned up. But the 4 wires that go the the back got cut (by my buddy) when cutting something under the truck. Its a clean cut and the wires would have to be spliced back together. Its right at the back of the cab where its meets the bed. I can take more pics if you need them.

F-85 · 04-03-2011, 10:42 AM

Quote:

Originally Posted by CORSAIR

Can you let me know $$ with shipping I want to get this handled??
seat belts
Transfer case trim
Red door panels (red is ok)

Thanks,
CORSAIR

Sending PM now.

F-85 · 04-03-2011, 11:49 AM

Heres pics of the harness

F-85 · 04-03-2011, 05:42 PM

Here are a few things SOLD today

Axles
seatbelts
transfercase boot and housing
shifter
rear view mirror
wheels and tires

F-85 · 04-04-2011, 08:25 AM

This is an updated parts and price list 4/4/11 Here are the parts that are left. any questions just ask.

Boss 9.5' Vplow complete in working order $500
Gauge cluster $75
Gauge bezel $75
All plastic interior trim black $80
Bench seat $40
Brake master $40
Complete wiring haress (non a/c 454, carb, power windows and doorlocks, manual trans) $150
Brake/gas pedal set $20
windsheild (good) $40
Back glass split window $20
complete doors alittle rust on the bottom but usable manual window and locks $60 pr
back bumper driver quality $45
Rear bumper brackets $45 (4pc)
glove box $20
ash tray complete $40
front driveshaft $25
Hust shifter modified to fit in the truck with bench seat $25
dual battery trays $20
Manual colun nice steering wheel all works with keys $100
np208 transfer case works good $100
G body radiator 3 core regal, gs, cutlass monte carlo $75
dash panel moulding $20
Parking lamps (front grill) $20
Plastic bedliner $20
Tailgate $40

Email or call 63o-885-11o1

bikes&bowties · 04-04-2011, 10:42 AM

I'm going to pass on the steering box. Thanks though,
Posted via Mobile Device

**ScottH** · 04-04-2011, 10:54 AM

interested in total price on rear bumper brackets, best battery tray, and interior light lense shipped to 08753.

thanks

F-85 · 04-04-2011, 11:24 AM

Quote:

Originally Posted by bikes&bowties

I'm going to pass on the steering box. Thanks though,
Posted via Mobile Device

Yeah i figured you would. Its just heavy and we are far apart. No worries.

F-85 · 04-04-2011, 11:24 AM

Quote:

Originally Posted by ScottH

interested in total price on rear bumper brackets, best battery tray, and interior light lense shipped to 08753.

thanks

Ill try and get the last 2 bolts today and ill get you a price. sorry for the wait.

**ScottH** · 04-04-2011, 11:30 AM

No hurry on my end, just wanted to let u know I was still interested.

Thanks
Scott

SS Delux · 04-04-2011, 12:17 PM

Pics of the hurst shifter ? what transmision is in it ? Shipping on the shifter to N9G2A7 (Canada)

JW76 · 04-04-2011, 12:57 PM

Can you get me a price and shipping quote for the rear cab aluminum trim and corners to 02917? In your opinion what is the quality of it? Can it be restored nicely?

F-85 · 04-06-2011, 08:44 AM

Quote:

Originally Posted by ScottH

interested in total price on rear bumper brackets, best battery tray, and interior light lense shipped to 08753.

thanks

Sorry it took so long. i got the brackets off. And boxed. The battery trays my buddy took and is gonna try and get one to fit in his car. Sorry. Shipping UPS the brackets are $19 So $45 for the brackets, light lense FREE, and shipping makes the total $64. Here is pics of the brackets.

F-85 · 04-06-2011, 08:46 AM

Quote:

Originally Posted by SS Delux

Pics of the hurst shifter ? what transmision is in it ? Shipping on the shifter to N9G2A7 (Canada)

Here are pics. We had it on a 700r4 trans, but will work on th400, th350, 700r4, 2004r, th300. Your shipping would be $29 USPS priority. So total of $54

F-85 · 04-06-2011, 08:49 AM

Quote:

Originally Posted by JW76

Can you get me a price and shipping quote for the rear cab aluminum trim and corners to 02917? In your opinion what is the quality of it? Can it be restored nicely?

No big scratches. Just a few small dents. Im no pro, but if someone knew what they were doing they could straighten they up nice. Here are a few more pics. Shipping them in 2 boxes UPS ground $31 your total would be $56

**ScottH** · 04-06-2011, 11:33 AM

pm sent

F-85 · 04-06-2011, 12:31 PM

Quote:

Originally Posted by ScottH

pm sent

I didnt get one. But im sending you one now.

04-02-2011, 10:47 PM	#54
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting 1986 K30 Any cost on the items I asked about? __________________ "The Can't Family Lives Across The Street"

04-02-2011, 11:17 PM	#56
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting 1986 K30 Can you let me know $$ with shipping I want to get this handled?? seat belts Transfer case trim Red door panels (red is ok) Thanks, CORSAIR __________________ "The Can't Family Lives Across The Street"

04-03-2011, 11:49 AM	#61
F-85 Registered User Join Date: Jul 2010 Location: Paw Paw,il Posts: 389	Re: Parting 1986 K30 Heres pics of the harness Attached Images

04-03-2011, 05:42 PM	#62
F-85 Registered User Join Date: Jul 2010 Location: Paw Paw,il Posts: 389	Re: Parting 1986 K30 Here are a few things SOLD today Axles seatbelts transfercase boot and housing shifter rear view mirror wheels and tires

04-04-2011, 08:25 AM	#63
F-85 Registered User Join Date: Jul 2010 Location: Paw Paw,il Posts: 389	Re: Parting 1986 K30 This is an updated parts and price list 4/4/11 Here are the parts that are left. any questions just ask. Boss 9.5' Vplow complete in working order $500 Gauge cluster $75 Gauge bezel $75 All plastic interior trim black $80 Bench seat $40 Brake master $40 Complete wiring haress (non a/c 454, carb, power windows and doorlocks, manual trans) $150 Brake/gas pedal set $20 windsheild (good) $40 Back glass split window $20 complete doors alittle rust on the bottom but usable manual window and locks $60 pr back bumper driver quality $45 Rear bumper brackets $45 (4pc) glove box $20 ash tray complete $40 front driveshaft $25 Hust shifter modified to fit in the truck with bench seat $25 dual battery trays $20 Manual colun nice steering wheel all works with keys $100 np208 transfer case works good $100 G body radiator 3 core regal, gs, cutlass monte carlo $75 dash panel moulding $20 Parking lamps (front grill) $20 Plastic bedliner $20 Tailgate $40 Email or call 63o-885-11o1

04-04-2011, 10:42 AM	#64
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Parting 1986 K30 I'm going to pass on the steering box. Thanks though, Posted via Mobile Device

04-04-2011, 10:54 AM	#65
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 1986 K30 interested in total price on rear bumper brackets, best battery tray, and interior light lense shipped to 08753. thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 04-04-2011 at 11:10 AM.

04-04-2011, 11:30 AM	#68
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 1986 K30 No hurry on my end, just wanted to let u know I was still interested. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-04-2011, 12:17 PM	#69
SS Delux Registered User Join Date: Jun 2010 Location: windsor Posts: 290	Re: Parting 1986 K30 Pics of the hurst shifter ? what transmision is in it ? Shipping on the shifter to N9G2A7 (Canada)

04-04-2011, 12:57 PM	#70
JW76 Registered User Join Date: Dec 2008 Location: Providence Rhode Island Posts: 404	Re: Parting 1986 K30 Can you get me a price and shipping quote for the rear cab aluminum trim and corners to 02917? In your opinion what is the quality of it? Can it be restored nicely?

04-06-2011, 11:33 AM	#74
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 1986 K30 pm sent __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 04-06-2011 at 11:43 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.