KS 68 chevy swb fleet with posi geting parted - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

47thriftmaster · 05-20-2011, 11:44 PM

Randy,
Was the bed good enough to get patches cut out, would need driver side from wheel back?
Thanks Monte

teeitup · 05-20-2011, 11:53 PM

taank, glad you found one

seadonkey, Nick, not sure what I have out there, I'll look this weekend

Monte, sorry no patches out of this bed, trying to sell complete bedsides

Thanks Randy

*taank* · 05-21-2011, 12:22 AM

Quote:

Originally Posted by teeitup

taank, glad you found one

seadonkey, Nick, not sure what I have out there, I'll look this weekend

Monte, sorry no patches out of this bed, trying to sell complete bedsides

Thanks Randy

Still might need an alternative. Got anything?
Posted via Mobile Device

teeitup · 05-21-2011, 12:24 AM

I may have a good one on a truck I just hauled in but not sure when I can get around to getting it off

**too much stuff** · 05-21-2011, 09:18 AM

Randy, i am going to pass on the bedside. Is there anything else with the pass fender for problems? Dents? Any rust at the rear of the fender by the rocker panel? And what is your opinion on the core support? Is it going to need quite a bit of work to be useable? I see the rust in the pics, but kind of hard to tell how much work it will need. Thanks, Eric

teeitup · 05-21-2011, 09:57 AM

Eric, back part of fender is good. I'll look again on dents. Rad support is fixable I think. Thanks Randy

teeitup · 05-21-2011, 10:00 AM

Complete rearend is SOLD to Darkhorse970 pending payment. Thanks Randy

teeitup · 05-21-2011, 10:44 AM

Eric, no dents, no rot in rear just some surface rust

teeitup · 05-21-2011, 10:45 AM

Guys here is the rust spot on insise part of pass bedside

47thriftmaster · 05-21-2011, 04:35 PM

Randy,
does the truck have the original lug nuts? Could use a set of 24 for my 72. Thanks

**Dieselwrencher** · 05-21-2011, 11:22 PM

Randy, I'll be talking to him tomorrow and let you know. Thanks Ryan.

teeitup · 05-22-2011, 09:43 AM

Monte, sorry not original. Hey are you needing a 71-72 grill, I have a nice one just in, but the bad thing I don't ship those

Ryan, thanks just let me know

Randy

47thriftmaster · 05-22-2011, 10:32 AM

Randy,
Yes I'm needing a 72 grill, how much for the grill, I'll have to figure out how to get it to me. Could you get some pictures of it.

teeitup · 05-22-2011, 10:35 AM

Monte, I'll check it out better and get pics and price. Are you needing inner too? Thanks Randy

47thriftmaster · 05-22-2011, 11:31 AM

Randy,
Yes, will be needing everything to the grill. Thanks Monte

**zicc1835** · 05-22-2011, 02:16 PM

Randy
67/68 hood do you have one avaiable I see them in the pics.?
Posted via Mobile Device

teeitup · 05-22-2011, 10:21 PM

Zicc, sorry no shipping hoods. Thanks Randy

teeitup · 05-22-2011, 10:50 PM

Monte, I called the guy back who I bought it from and he said this was a NOS grill and chrome on truck. So its not OEM. Its not in bad shape, couple dings and some scrapes. I think inner is OEM, its in good shape, just needs painted. Bowtie is cracked. Asking $225 for it complete picked up. Thanks Randy

teeitup · 05-22-2011, 10:53 PM

mooooooooooooooo

teeitup · 05-22-2011, 10:55 PM

last

47thriftmaster · 05-22-2011, 11:17 PM

Randy,
I'll pass on the grill for now, not in a rush so maybe by the time I need one I'll be closer to pick it up. On the same not, how are the bumpers and brackets? Still need front and rear for the blazer. Not in a rush on those either, but trying to start the build from the wheels an work up. Thanks, Monte

teeitup · 05-22-2011, 11:34 PM

No problem Monte. I'm not sure on bumpers I'll check them out. Thanks Randy

47thriftmaster · 05-23-2011, 12:03 AM

Thanks Randy, while your at it can you check the tie rod. Mine is bent pretty bad. Monte

**Dieselwrencher** · 05-23-2011, 02:30 PM

Randy, I spoke with my friend last night and he's going to pass. If you find a more complete bed he said he's in.

UP GRADE · 05-23-2011, 06:28 PM

randy put me in line for the posi guts!!

05-20-2011, 11:44 PM	#51
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 68 chevy swb fleet with posi geting parted Randy, Was the bed good enough to get patches cut out, would need driver side from wheel back? Thanks Monte

05-20-2011, 11:53 PM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted taank, glad you found one seadonkey, Nick, not sure what I have out there, I'll look this weekend Monte, sorry no patches out of this bed, trying to sell complete bedsides Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-21-2011, 12:24 AM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted I may have a good one on a truck I just hauled in but not sure when I can get around to getting it off __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-21-2011, 09:18 AM	#55
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 68 chevy swb fleet with posi geting parted Randy, i am going to pass on the bedside. Is there anything else with the pass fender for problems? Dents? Any rust at the rear of the fender by the rocker panel? And what is your opinion on the core support? Is it going to need quite a bit of work to be useable? I see the rust in the pics, but kind of hard to tell how much work it will need. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-21-2011, 09:57 AM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Eric, back part of fender is good. I'll look again on dents. Rad support is fixable I think. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-21-2011, 10:00 AM	#57
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Complete rearend is SOLD to Darkhorse970 pending payment. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-21-2011, 10:44 AM	#58
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Eric, no dents, no rot in rear just some surface rust Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-21-2011, 10:45 AM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Guys here is the rust spot on insise part of pass bedside Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-21-2011, 04:35 PM	#60
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 68 chevy swb fleet with posi geting parted Randy, does the truck have the original lug nuts? Could use a set of 24 for my 72. Thanks

05-21-2011, 11:22 PM	#61
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 68 chevy swb fleet with posi geting parted Randy, I'll be talking to him tomorrow and let you know. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-22-2011, 09:43 AM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Monte, sorry not original. Hey are you needing a 71-72 grill, I have a nice one just in, but the bad thing I don't ship those Ryan, thanks just let me know Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2011, 10:32 AM	#63
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 68 chevy swb fleet with posi geting parted Randy, Yes I'm needing a 72 grill, how much for the grill, I'll have to figure out how to get it to me. Could you get some pictures of it.

05-22-2011, 10:35 AM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Monte, I'll check it out better and get pics and price. Are you needing inner too? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2011, 11:31 AM	#65
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 68 chevy swb fleet with posi geting parted Randy, Yes, will be needing everything to the grill. Thanks Monte

05-22-2011, 02:16 PM	#66
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,298	Re: 68 chevy swb fleet with posi geting parted Randy 67/68 hood do you have one avaiable I see them in the pics.? Posted via Mobile Device __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557



Register or Log In To remove these advertisements.

05-22-2011, 10:21 PM	#67
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Zicc, sorry no shipping hoods. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2011, 10:50 PM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted Monte, I called the guy back who I bought it from and he said this was a NOS grill and chrome on truck. So its not OEM. Its not in bad shape, couple dings and some scrapes. I think inner is OEM, its in good shape, just needs painted. Bowtie is cracked. Asking $225 for it complete picked up. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2011, 10:53 PM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted mooooooooooooooo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2011, 10:55 PM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted last Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2011, 11:17 PM	#71
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 68 chevy swb fleet with posi geting parted Randy, I'll pass on the grill for now, not in a rush so maybe by the time I need one I'll be closer to pick it up. On the same not, how are the bumpers and brackets? Still need front and rear for the blazer. Not in a rush on those either, but trying to start the build from the wheels an work up. Thanks, Monte

05-22-2011, 11:34 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 68 chevy swb fleet with posi geting parted No problem Monte. I'm not sure on bumpers I'll check them out. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-23-2011, 12:03 AM	#73
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 68 chevy swb fleet with posi geting parted Thanks Randy, while your at it can you check the tie rod. Mine is bent pretty bad. Monte

05-23-2011, 02:30 PM	#74
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 68 chevy swb fleet with posi geting parted Randy, I spoke with my friend last night and he's going to pass. If you find a more complete bed he said he's in. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-23-2011, 06:28 PM	#75
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: 68 chevy swb fleet with posi geting parted randy put me in line for the posi guts!!

Register or Log In To remove these advertisements.