Wilwood Engineering Special - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scottshotrods · 02-28-2013, 03:51 PM

Quote:

Originally Posted by EZURCC

I'm looking for #140-11385-R. Would you be able to quote me the kit? Thanks.

p/m sent

Justin

EZURCC · 02-28-2013, 06:34 PM

Posted via Mobile Device

EZURCC · 02-28-2013, 08:02 PM

Posted via Mobile Device

Trucksrme · 03-04-2013, 10:50 PM

Posted via Mobile Device

Trucksrme · 03-04-2013, 10:51 PM

Can I get a price on some d-52 with some drilled and slotted rotors and pads
Posted via Mobile Device

Scottshotrods · 03-05-2013, 11:21 AM

Quote:

Originally Posted by Trucksrme

Can I get a price on some d-52 with some drilled and slotted rotors and pads
Posted via Mobile Device

p/m sent

Justin

JointTech · 03-15-2013, 12:24 PM

Quote:

Originally Posted by Trucksrme

Can I get a price on some d-52 with some drilled and slotted rotors and pads
Posted via Mobile Device

me too please

tech@scottshotrods · 03-15-2013, 06:11 PM

Quote:

Originally Posted by JointTech

me too please

PM sent

Scottshotrods · 06-05-2013, 12:28 PM

Wilwood is 7 miles from our shop we get very fast service and have some of the best pricing on there brakes out there.Let us know and we cannot be beat

Justin

C0UCH · 06-05-2013, 06:33 PM

Looking to update my entire brake system on my 67. I already have 5 on 5 lugs front and rear and a disc swap done up front but the brakes are currently terrible. Looking to go all Wilwood, and have everything under the dash so either their reverse setups or your indash pedal assembly. I'll be running 15" Aero Race wheels. Not 100% sure if I'm going to swap to a manual trans or not though (pedal assembly setup). Quote for the manual pedal setup and I can always remove the clutch pedal (if possible).

Let me know if you need any other information. I'll be available to talk on the phone in two hours if necessary.

-Ken

Scottshotrods · 06-05-2013, 06:54 PM

Quote:

Originally Posted by C0UCH

Looking to update my entire brake system on my 67. I already have 5 on 5 lugs front and rear and a disc swap done up front but the brakes are currently terrible. Looking to go all Wilwood, and have everything under the dash so either their reverse setups or your indash pedal assembly. I'll be running 15" Aero Race wheels. Not 100% sure if I'm going to swap to a manual trans or not though (pedal assembly setup). Quote for the manual pedal setup and I can always remove the clutch pedal (if possible).

Let me know if you need any other information. I'll be available to talk on the phone in two hours if necessary.

-Ken

On your brake rotors you have on your truck now.If you want to keep them on we can set you up with a Wilwood d52 caliper in black or red with pads and mounting hardware.

On your rear brakes if you are running a 12 bolt rear we can do a Wilwood d154 kit with a internal parking brake and a black or red d154 caliper

For the under the dash set up we can set you up with this to.

If you can call us at the shop at (805)485-0382 we can discuss your pricing and all the parts you will need

Justin

C0UCH · 06-05-2013, 07:11 PM

I'd like to go with an all new setup. CPP Modular drop spindles, new hubs, mounts, calipers, discs etc. I'll get a list together and give you a call. How late do you take calls?

Scottshotrods · 06-05-2013, 07:19 PM

Quote:

Originally Posted by C0UCH

I'd like to go with an all new setup. CPP Modular drop spindles, new hubs, mounts, calipers, discs etc. I'll get a list together and give you a call. How late do you take calls?

We are hear until 5:30 call me (805)485-0382

C0UCH · 06-05-2013, 07:21 PM

Quote:

Originally Posted by Scottshotrods

We are hear until 5:30 call me (805)485-0382

I'm at work until 5:30 today too. I'll get some more info together this evening and call you tomorrow around 1 or so.

Scottshotrods · 06-05-2013, 07:32 PM

Quote:

Originally Posted by C0UCH

I'm at work until 5:30 today too. I'll get some more info together this evening and call you tomorrow around 1 or so.

Sounds good call me after 1pm if you can

Justin

Scottshotrods · 10-16-2013, 04:09 PM

ttt

smoky02 · 10-30-2013, 06:34 AM

I am running astro van rotors on the rear of my truck. Do you have a set of will wood d52s that I could mount on them on the rear of my truck with a e brake?

Scottshotrods · 10-30-2013, 11:00 AM

Quote:

Originally Posted by smoky02

I am running astro van rotors on the rear of my truck. Do you have a set of will wood d52s that I could mount on them on the rear of my truck with a e brake?

p/m sent

Justin

RICKSRAT · 10-30-2013, 01:10 PM

Justin have the Wilwood D52 on front and would like the D154 for the rear. Have a Moser Dana 60 w/ large Gm/Impala ends. Can I get a price for Part # 140-12569 and master cylinder . Thanks Rick

Scottshotrods · 10-30-2013, 01:20 PM

Quote:

Originally Posted by RICKSRAT

Justin have the Wilwood D52 on front and would like the D154 for the rear. Have a Moser Dana 60 w/ large Gm/Impala ends. Can I get a price for Part # 140-12569 and master cylinder . Thanks Rick

P/m sent

Justin

Scottshotrods · 03-03-2014, 12:53 PM

We have Wilwood brakes and we have Great prices on all of there parts.Let us know and we will take care of you

Dirt_Baller · 03-03-2014, 03:44 PM

Can I get a price on some d-52 with some drilled/slotted rotors, pads and hardware. Do you just sell A Arm uppers and lowers for 68-72 C10?

Scottshotrods · 03-03-2014, 04:10 PM

Quote:

Originally Posted by Dirt_Baller

Can I get a price on some d-52 with some drilled/slotted rotors, pads and hardware. Do you just sell A Arm uppers and lowers for 68-72 C10?

p/m sent
Justin

Scottshotrods · 03-04-2014, 10:23 AM

Thanks for the orders on Monday

Justin

71meangreenc10 · 04-05-2014, 09:09 PM

You guys still running specials on this?

Smitty

02-28-2013, 06:34 PM	#52
EZURCC Registered User Join Date: May 2005 Location: PEARLAND, TX Posts: 16	Re: Wilwood Engineering Special Posted via Mobile Device

02-28-2013, 08:02 PM	#53
EZURCC Registered User Join Date: May 2005 Location: PEARLAND, TX Posts: 16	Re: Wilwood Engineering Special Posted via Mobile Device

03-04-2013, 10:50 PM	#54
Trucksrme Registered User Join Date: May 2008 Location: Houston,Tx Posts: 120	Re: Wilwood Engineering Special Posted via Mobile Device

03-04-2013, 10:51 PM	#55
Trucksrme Registered User Join Date: May 2008 Location: Houston,Tx Posts: 120	Re: Wilwood Engineering Special Can I get a price on some d-52 with some drilled and slotted rotors and pads Posted via Mobile Device

06-05-2013, 12:28 PM	#59
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Wilwood Engineering Special Wilwood is 7 miles from our shop we get very fast service and have some of the best pricing on there brakes out there.Let us know and we cannot be beat Justin

06-05-2013, 06:33 PM	#60
C0UCH Registered User Join Date: Jun 2012 Location: Anaheim, CA Posts: 455	Re: Wilwood Engineering Special Looking to update my entire brake system on my 67. I already have 5 on 5 lugs front and rear and a disc swap done up front but the brakes are currently terrible. Looking to go all Wilwood, and have everything under the dash so either their reverse setups or your indash pedal assembly. I'll be running 15" Aero Race wheels. Not 100% sure if I'm going to swap to a manual trans or not though (pedal assembly setup). Quote for the manual pedal setup and I can always remove the clutch pedal (if possible). Let me know if you need any other information. I'll be available to talk on the phone in two hours if necessary. -Ken

06-05-2013, 07:11 PM	#62
C0UCH Registered User Join Date: Jun 2012 Location: Anaheim, CA Posts: 455	Re: Wilwood Engineering Special I'd like to go with an all new setup. CPP Modular drop spindles, new hubs, mounts, calipers, discs etc. I'll get a list together and give you a call. How late do you take calls?

10-16-2013, 04:09 PM	#66
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Wilwood Engineering Special ttt

10-30-2013, 06:34 AM	#67
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: Wilwood Engineering Special I am running astro van rotors on the rear of my truck. Do you have a set of will wood d52s that I could mount on them on the rear of my truck with a e brake? __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

10-30-2013, 01:10 PM	#69
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Wilwood Engineering Special Justin have the Wilwood D52 on front and would like the D154 for the rear. Have a Moser Dana 60 w/ large Gm/Impala ends. Can I get a price for Part # 140-12569 and master cylinder . Thanks Rick __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32

03-03-2014, 12:53 PM	#71
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Wilwood Engineering Special We have Wilwood brakes and we have Great prices on all of there parts.Let us know and we will take care of you

03-03-2014, 03:44 PM	#72
Dirt_Baller Registered User Join Date: Feb 2014 Location: Ft Campbell Posts: 82	Re: Wilwood Engineering Special Can I get a price on some d-52 with some drilled/slotted rotors, pads and hardware. Do you just sell A Arm uppers and lowers for 68-72 C10?

03-04-2014, 10:23 AM	#74
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Wilwood Engineering Special Thanks for the orders on Monday Justin

04-05-2014, 09:09 PM	#75
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Wilwood Engineering Special You guys still running specials on this? Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.