PA SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jim_PA · 07-03-2011, 06:31 AM

Quote:

Originally Posted by mater63

jim can i get a pic of the track arm bracket on drivers side

I'm not at home for another 7 days, but are you talking about the roller or the 67 suburban frame?

**1970greenc10** · 07-03-2011, 09:46 PM

pm sent. Thanks,Marty

1970 custom · 07-03-2011, 10:34 PM

How much for floor pan shipped to 75789
Posted via Mobile Device

Jim_PA · 07-04-2011, 07:45 AM

I think I have a local buyer for the floor pan. I will let you know if that changes.

Low & Slow · 07-07-2011, 09:48 AM

Looking for the parking brake cables & brackets from the rear axle all the way to the handle from the long bed. I need everything to bolt it onto a bare frame.

Also need both doors and a drivers side fender. Not sure what is spoken for and what isn't. I can pickup as well.

Thanks!

Low & Slow · 07-07-2011, 09:50 AM

Quote:

Originally Posted by Low & Slow

Looking for the parking brake cables & brackets from the rear axle all the way to the handle from the long bed. I need everything to bolt it onto a bare frame.

Also need both doors and a drivers side fender. Not sure what is spoken for and what isn't. I can pickup as well.

Thanks!

Willing to sell the blue doors off of the cab separate?

bguild · 07-07-2011, 09:53 AM

CPP tutular trans crossmember: $50 shipped I will take it but I want to see some pictures..

also is this new or used?

Jim_PA · 07-07-2011, 12:17 PM

Quote:

Originally Posted by bguild

CPP tutular trans crossmember: $50 shipped I will take it but I want to see some pictures..

also is this new or used?

It's lightly used. Looks like new.

Will take some pics for you Saturday.

Jim_PA · 07-07-2011, 12:18 PM

Quote:

Originally Posted by Low & Slow

Looking for the parking brake cables & brackets from the rear axle all the way to the handle from the long bed. I need everything to bolt it onto a bare frame.

Also need both doors and a drivers side fender. Not sure what is spoken for and what isn't. I can pickup as well.

Thanks!

I have a deal pending on the blue cab, and I'm still holding out for a buyer on the 68 roller before doing a part-out.

bguild · 07-07-2011, 02:03 PM

Quote:

Originally Posted by Jim_PA

It's lightly used. Looks like new.

Will take some pics for you Saturday.

Sounds good.. 99% I will take it so dont sell it. also you take paypal correct?

Jim_PA · 07-07-2011, 06:48 PM

Quote:

Originally Posted by bguild

Sounds good.. 99% I will take it so dont sell it. also you take paypal correct?

Yes I do -

C10_ustacould · 07-08-2011, 06:31 PM

Jim - If you still have the ECE LS swap engine mounts and they are new, can you do $150 shipped to 32578?

Jim_PA · 07-08-2011, 11:58 PM

Quote:

Originally Posted by BucksSS

Jim - If you still have the ECE LS swap engine mounts and they are new, can you do $150 shipped to 32578?

They are not new, but based on the $219 price of new, I'll cut you a few bucks, but that's about it

I'll get pics of them up Sunday, they are still in the truck so I gotta take them out.

C10_ustacould · 07-09-2011, 05:15 PM

PM Sent

VA72C10 · 07-09-2011, 05:36 PM

Very interested in the complete roller....but need to figure out transportation. Do you know anyone who can transport it? I have a 355/350 combo I could drop right in and have a parts runner....I really need one

And all the trucks around here are high dollar resto's or complete junkers...

m6z · 07-09-2011, 09:00 PM

I'm still interested in the glove box emblem or door and emblem if you decide to part.

msgross · 07-09-2011, 09:18 PM

Quote:

Originally Posted by VA72C10

Very interested in the complete roller....but need to figure out transportation. Do you know anyone who can transport it? I have a 355/350 combo I could drop right in and have a parts runner....I really need one

And all the trucks around here are high dollar resto's or complete junkers...

grab a $50/day uhaul and come visit during Carlisle truck show in 4 weeks...

creepdogg · 07-09-2011, 09:39 PM

Is the cpp trans member still for sale? If so pm me paypal, ship to 48108
Posted via Mobile Device

VA72C10 · 07-09-2011, 09:59 PM

Quote:

Originally Posted by msgross

grab a $50/day uhaul and come visit during Carlisle truck show in 4 weeks...

That would be easier if I had a truck to haul the u-haul with

Jim_PA · 07-09-2011, 10:49 PM

Quote:

Originally Posted by VA72C10

Very interested in the complete roller....but need to figure out transportation. Do you know anyone who can transport it? I have a 355/350 combo I could drop right in and have a parts runner....I really need one

And all the trucks around here are high dollar resto's or complete junkers...

My cost to haul all the way to you would be $300. I'd consider doing it for $500 (Yeah, crazy high... I know

)

A good friend of mine hauls cars all day long. I can't imagine he'd charge much less than 350-400, but I could ask if you are serious!

If you want the 72 picture spread, PM me your email address.

I feel it's a great truck for your purpose. Would need work to make it a NICE truck, but I think it's a good value for a shop truck/first project.

Jim_PA · 07-09-2011, 10:58 PM

Quote:

Originally Posted by creepdogg

Is the cpp trans member still for sale? If so pm me paypal, ship to 48108
Posted via Mobile Device

You are #2 in line.

Jim_PA · 07-09-2011, 11:00 PM

Quote:

Originally Posted by BucksSS

PM Sent

I'll get the pics of the engine mounts to you tomorrow. Will remove them then for sure.

Jim_PA · 07-09-2011, 11:02 PM

Quote:

Originally Posted by m6z

I'm still interested in the glove box emblem or door and emblem if you decide to part.

Yep! I have you noted in my head--

Jim_PA · 07-09-2011, 11:06 PM

The '67 suburban frame with the good trailing arms is back up for grabs.

creepdogg · 07-09-2011, 11:29 PM

Quote:

Originally Posted by Jim_PA

You are #2 in line.

Jim,
Roger that, keep me posted. I know I am new to the boards but my money spends the same as everyone else

07-03-2011, 09:46 PM	#52
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff pm sent. Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

07-03-2011, 10:34 PM	#53
1970 custom Registered User Join Date: Jun 2011 Location: troup tx Posts: 123	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff How much for floor pan shipped to 75789 Posted via Mobile Device

07-04-2011, 07:45 AM	#54
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff I think I have a local buyer for the floor pan. I will let you know if that changes.

07-07-2011, 09:48 AM	#55
Low & Slow Registered User Join Date: May 2011 Location: Philly Pa Posts: 124	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff Looking for the parking brake cables & brackets from the rear axle all the way to the handle from the long bed. I need everything to bolt it onto a bare frame. Also need both doors and a drivers side fender. Not sure what is spoken for and what isn't. I can pickup as well. Thanks!

07-07-2011, 09:53 AM	#57
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff CPP tutular trans crossmember: $50 shipped I will take it but I want to see some pictures.. also is this new or used? __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

07-08-2011, 06:31 PM	#62
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff Jim - If you still have the ECE LS swap engine mounts and they are new, can you do $150 shipped to 32578? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD Last edited by C10_ustacould; 07-08-2011 at 07:07 PM. Reason: clarification

07-09-2011, 05:15 PM	#64
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff PM Sent __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-09-2011, 05:36 PM	#65
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff Very interested in the complete roller....but need to figure out transportation. Do you know anyone who can transport it? I have a 355/350 combo I could drop right in and have a parts runner....I really need one And all the trucks around here are high dollar resto's or complete junkers... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-09-2011, 09:00 PM	#66
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff I'm still interested in the glove box emblem or door and emblem if you decide to part. __________________ Doug Looking for a 67-72 short bed driver.....

07-09-2011, 09:39 PM	#68
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff Is the cpp trans member still for sale? If so pm me paypal, ship to 48108 Posted via Mobile Device

07-09-2011, 11:06 PM	#74
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: SELLING EVERYTHING! 68 C-10 50th LWB (no bed rust) roller, parts, big stuff The '67 suburban frame with the good trailing arms is back up for grabs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.