AL clean 70 custom truck parting out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mrdana60* · 08-01-2011, 09:50 AM

i ll get some better pics today. your not too far from me. i live across state line on 411

*mrdana60* · 08-01-2011, 10:15 AM

the cab does have some rust on passenger side drip rail. uploading pics right now. but floor is pretty solid on both sides

*mrdana60* · 08-01-2011, 10:27 AM

Quote:

Originally Posted by dan s

$50 sounds good.should be 6 pcs of upper trim -fender/door/cab for each side plus all clips.Also the trim on the back of the cab below the window/I think it is 3 pieces r+l and small center cap . send pics when removed and then give me paypal info. Thanks Dan

all the trim is good except for the back drivers side of the paint divider it has a dent in it. but the rest is straight. what you think ?

*mrdana60* · 08-01-2011, 10:29 AM

Quote:

Originally Posted by Vintage Windmills

Thanks for the pic. Is that discoloring on the arm rest present on the driver side arm rest? Is that discoloring or just surface residue on the door panel?

the door panels cleaned up and will need alittle more cleaning. the arm rest does have some discoloring on them. uploading pics right now. what you think ?

*mrdana60* · 08-01-2011, 10:53 AM

Quote:

Originally Posted by Vintage Windmills

Thanks for the pic. Is that discoloring on the arm rest present on the driver side arm rest? Is that discoloring or just surface residue on the door panel?

http://i243.photobucket.com/albums/f...7/SAM_3124.jpg

*mrdana60* · 08-01-2011, 10:54 AM

Quote:

Originally Posted by dan s

$50 sounds good.should be 6 pcs of upper trim -fender/door/cab for each side plus all clips.Also the trim on the back of the cab below the window/I think it is 3 pieces r+l and small center cap . send pics when removed and then give me paypal info. Thanks Dan

this is the dent

*mrdana60* · 08-01-2011, 10:58 AM

Quote:

Originally Posted by rob32472

Yes bare cab is all I am interested in

*mrdana60* · 08-01-2011, 10:59 AM

Quote:

Originally Posted by rob32472

Yes bare cab is all I am interested in

it does have some dents on the back.

Vintage Windmills · 08-01-2011, 12:08 PM

Quote:

Originally Posted by mrdana60

the door panels cleaned up and will need alittle more cleaning. the arm rest does have some discoloring on them. uploading pics right now. what you think ?

Cool, assuming theyre not rotted out on the backside (surface rust ok) I will take the door panels for $70 shipped if that works for you. I will pass on the armrests, already have a set in same condition.

*mrdana60* · 08-01-2011, 12:09 PM

Quote:

Originally Posted by Vintage Windmills

Cool, I will take the door panels for $70 shipped if that works for you. I will pass on the armrests, already have a set in same condition.

pm sent

Vintage Windmills · 08-01-2011, 12:11 PM

cool, I also added "assuming theyre not rotted out (surface rust ok)" to my post, wanted to make sure you saw that

*mrdana60* · 08-01-2011, 12:12 PM

well check in a few min and get back with you

*mrdana60* · 08-01-2011, 12:51 PM

Quote:

Originally Posted by Vintage Windmills

cool, I also added "assuming theyre not rotted out (surface rust ok)" to my post, wanted to make sure you saw that

the driver side has some rust in between the cover and the metal part but its not rusted through. getting pics right now.

*mrdana60* · 08-01-2011, 01:08 PM

Quote:

Originally Posted by skoolbusyeller72

How good is the driver door and both mirrors? i really need just the tripods,mine was painted at one time..

the driver door is in good cond not perfect and the mirrors are in pretty good shape. the glass is out of the driver side but i still have the glass its fine.

*mrdana60* · 08-01-2011, 01:13 PM

Quote:

Originally Posted by Vintage Windmills

Cool, assuming theyre not rotted out on the backside (surface rust ok) I will take the door panels for $70 shipped if that works for you. I will pass on the armrests, already have a set in same condition.

g.meyer · 08-01-2011, 01:38 PM

How much for a drivers side fender? And also the fan shroud?

1970 Bowtie · 08-01-2011, 01:49 PM

Whats the condition of the interior rear view mirror,might be interested.

Vintage Windmills · 08-01-2011, 01:57 PM

Paypal sent for door panels.

*mrdana60* · 08-01-2011, 02:53 PM

Quote:

Originally Posted by g.meyer

How much for a drivers side fender? And also the fan shroud?

50 bucks plus shipping and i will take the trim off it. i think i got the trim sold. and 40 plus shipping for fan shroud ?

*mrdana60* · 08-01-2011, 02:54 PM

Quote:

Originally Posted by 1970 Bowtie

Whats the condition of the interior rear view mirror,might be interested.

will get you a pic of rear view mirror

*mrdana60* · 08-01-2011, 02:55 PM

Quote:

Originally Posted by Vintage Windmills

Paypal sent for door panels.

will get the door panels sent asap. thanks, kevin

**lolife99** · 08-01-2011, 02:59 PM

I'm interested in the '70 inner grille only.
How much shipped and insured to 65251?

*mrdana60* · 08-01-2011, 03:04 PM

Quote:

Originally Posted by lolife99

I'm interested in the '70 inner grille only.
How much shipped and insured to 65251?

85 shipped ?

**lolife99** · 08-01-2011, 03:09 PM

Quote:

Originally Posted by mrdana60

85 shipped ?

Just to clarify.
This is the inner grill I'm talking about.
I will take it as long as there are no cracks or broken mounting points.

These grilles are easily damaged during shipping.
Please insure it.

*mrdana60* · 08-01-2011, 03:14 PM

Quote:

Originally Posted by lolife99

Just to clarify.
This is the inner grill I'm talking about.
I will take it as long as there are no cracks or broken mounting points.

These grilles are easily damaged during shipping.
Please insure it.

ok i ll bubble wrap the **** out of it lol. i ll post better pics of it when i get it out.

08-01-2011, 09:50 AM	#51
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: clean 70 custom truck parting out i ll get some better pics today. your not too far from me. i live across state line on 411

08-01-2011, 10:15 AM	#52
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: clean 70 custom truck parting out the cab does have some rust on passenger side drip rail. uploading pics right now. but floor is pretty solid on both sides

08-01-2011, 12:11 PM	#61
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: clean 70 custom truck parting out cool, I also added "assuming theyre not rotted out (surface rust ok)" to my post, wanted to make sure you saw that __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-01-2011, 12:12 PM	#62
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: clean 70 custom truck parting out well check in a few min and get back with you

08-01-2011, 01:38 PM	#66
g.meyer Registered User Join Date: Jul 2011 Location: Cabot AR Posts: 24	Re: clean 70 custom truck parting out How much for a drivers side fender? And also the fan shroud?

08-01-2011, 01:49 PM	#67
1970 Bowtie It's all in the timing Join Date: May 2009 Location: Lake Mary,Florida Posts: 600	Re: clean 70 custom truck parting out Whats the condition of the interior rear view mirror,might be interested. __________________ The Dude Abides. ---------------------- I aint sayin, I'm just sayin.

08-01-2011, 01:57 PM	#68
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: clean 70 custom truck parting out Paypal sent for door panels. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-01-2011, 02:59 PM	#72
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: clean 70 custom truck parting out I'm interested in the '70 inner grille only. How much shipped and insured to 65251? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.