TX Parting out 1978 Silverado BIG10 1/2 ton LWB - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 08-18-2011, 11:27 PM

PM sent

67_SS396 · 08-19-2011, 12:38 AM

Thanks for the parts Richard. Good doing business with you.
Posted via Mobile Device

gearheads78 · 08-19-2011, 10:18 AM

Quote:

Originally Posted by 67_SS396

Thanks for the parts Richard. Good doing business with you.
Posted via Mobile Device

No problem.
Thanks again

**old Rusty C10** · 08-20-2011, 09:23 PM

does that have a titl column if so how much minus the steering wheel shipped to 08859.. You can disassemble the foot piece too and i dont need the intermediate shaft

gearheads78 · 08-20-2011, 11:43 PM

Quote:

Originally Posted by old Rusty C10

does that have a titl column if so how much minus the steering wheel shipped to 08859.. You can disassemble the foot piece too and i dont need the intermediate shaft

I sold it already thanks

qadeem · 08-21-2011, 11:28 AM

The grille, I think it belongs to a GMC. Does it fit on the 79? Because the 78 has different plastic bezels style and a different lower molding. If it fits, what is the condition and how much.. to 80247.

gearheads78 · 08-21-2011, 12:07 PM

Quote:

Originally Posted by qadeem

The grille, I think it belongs to a GMC. Does it fit on the 79? Because the 78 has different plastic bezels style and a different lower molding. If it fits, what is the condition and how much.. to 80247.

It was the first thing I sold.

BigRed76 · 08-21-2011, 06:20 PM

I need body molding pieces. Are there any straight pieces left? and I cant use any off the bed because its a longbed.

I noticed that the pieces on the LH fender look pretty good.

gearheads78 · 08-21-2011, 11:19 PM

Quote:

Originally Posted by BigRed76

I need body molding pieces. Are there any straight pieces left? and I cant use any off the bed because its a longbed.

I noticed that the pieces on the LH fender look pretty good.

Really the only ones any good are the little short ones on the cab.

Gordonr1973 · 08-21-2011, 11:40 PM

Total price on:

metal door inserts with trim pieces?

to T6J 6Z6 (Canada)?

Thanks!

Jonboy · 08-22-2011, 02:30 PM

Thanks again Richard. Nice meeting you!

gearheads78 · 08-22-2011, 04:14 PM

Quote:

Originally Posted by Jonboy

Thanks again Richard. Nice meeting you!

You too. Seems like we live pretty similar lives and have the same tastes. Let me know when you start putting the new drop parts on yours. Don't know if I will be able to afford anything of the old stuff yet but I will see what I can scape up. We figured last night diapers and formula are $550.00 month at the current rate the twins are going through them.

76stepsidechevy · 08-22-2011, 10:22 PM

How about the rear spring crossmember? or even just the small brackets that go from the crossmember to the bottom of the frame.

gearheads78 · 08-22-2011, 10:37 PM

Quote:

Originally Posted by 76stepsidechevy

How about the rear spring crossmember? or even just the small brackets that go from the crossmember to the bottom of the frame.

Not sure if I am looking at the right part. I see what I call a rear spring cross brace but I don't see any brackets off of it. I see a cross brace at the front of the springs with brackets comming off of it. Is that what you are wanting?

Jonboy · 08-23-2011, 09:19 AM

Quote:

Originally Posted by gearheads78

You too. Seems like we live pretty similar lives and have the same tastes. Let me know when you start putting the new drop parts on yours. Don't know if I will be able to afford anything of the old stuff yet but I will see what I can scape up. We figured last night diapers and formula are $550.00 month at the current rate the twins are going through them.

Yeah, I know. On the brighter side, it doesn't last forever.

I will let you know what happens there. I think I may have picked up a blazer project yesterday. I don't know if it will ever make it back into one piece, though.

76stepsidechevy · 08-23-2011, 04:26 PM

Quote:

Originally Posted by gearheads78

Not sure if I am looking at the right part. I see what I call a rear spring cross brace but I don't see any brackets off of it. I see a cross brace at the front of the springs with brackets comming off of it. Is that what you are wanting?

Yea, the one between the front of the rear springs.

qksilver · 08-23-2011, 07:37 PM

Thanks for the column . came today. Great packing job, took me almost 5 minutes to open it!

Thanks again,
Steve

gearheads78 · 08-23-2011, 07:54 PM

Quote:

Originally Posted by qksilver

Thanks for the column . came today. Great packing job, took me almost 5 minutes to open it!

Thanks again,
Steve

No problem.

grs · 08-24-2011, 04:59 AM

What shape is the rear bumper in. I need a perfectly straight one for my 87. I have one that is bent. Can you ship to the Chicago area?

gearheads78 · 08-25-2011, 09:25 PM

Quote:

Originally Posted by grs

What shape is the rear bumper in. I need a perfectly straight one for my 87. I have one that is bent. Can you ship to the Chicago area?

its not worth anything but scrap

cheyenne402 · 08-27-2011, 03:32 PM

Quote:

Originally Posted by gearheads78

Ebay auction is over with no sale so I will part the window stuff out.

center harness 50.00 shipped
rh door harness 30.00 shipped
lh door harness 30.00 shipped
door locks 25.00 shipped each
window regulators 45.00 shipped each
switches 15.00 each shipped

will discount price and freight on multiple pieces

I will take both of the window regulators.

gearheads78 · 08-27-2011, 05:16 PM

Quote:

Originally Posted by cheyenne402

I will take both of the window regulators.

They are yours PM sent

Liddy71 · 08-28-2011, 09:24 AM

parts arrive thanks

gearheads78 · 08-29-2011, 06:41 PM

Cutting this one up with in the week so if you need a part of the cab or anthing let me know quick.

I have a whole other 77 3/4 ton truck that I will part out in a few months. I just need to be sure I have everything off that I need for my Suburban. I will make a new thread for that one when its time.

catfishtn · 09-01-2011, 07:29 PM

Any chance the rear bumper brackets are good? If so, are they the thick type?
3/8 - 1/2 inch, flat w/4 holes, two on each end?

Some lady hit me this morning and broke both of them without damaging the bumper!!

I live in Nashville, will you ship?

Thanks

Joe

08-18-2011, 11:27 PM	#51
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB PM sent __________________ 1974 Jimmy- 5.3/4L80e/NP241

08-19-2011, 12:38 AM	#52
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Thanks for the parts Richard. Good doing business with you. Posted via Mobile Device __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

08-20-2011, 09:23 PM	#54
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB does that have a titl column if so how much minus the steering wheel shipped to 08859.. You can disassemble the foot piece too and i dont need the intermediate shaft __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-21-2011, 11:28 AM	#56
qadeem Registered User Join Date: Feb 2011 Location: Denver, CO Posts: 129	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB The grille, I think it belongs to a GMC. Does it fit on the 79? Because the 78 has different plastic bezels style and a different lower molding. If it fits, what is the condition and how much.. to 80247.

08-21-2011, 06:20 PM	#58
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB I need body molding pieces. Are there any straight pieces left? and I cant use any off the bed because its a longbed. I noticed that the pieces on the LH fender look pretty good. __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB Last edited by BigRed76; 08-21-2011 at 07:06 PM.

08-21-2011, 11:40 PM	#60
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Total price on: metal door inserts with trim pieces? to T6J 6Z6 (Canada)? Thanks! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

08-22-2011, 02:30 PM	#61
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Thanks again Richard. Nice meeting you! __________________ 1974 Jimmy- 5.3/4L80e/NP241

08-22-2011, 10:22 PM	#63
76stepsidechevy Registered User Join Date: Nov 2010 Location: Windsor Locks Posts: 628	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB How about the rear spring crossmember? or even just the small brackets that go from the crossmember to the bottom of the frame.

08-23-2011, 07:37 PM	#67
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Thanks for the column . came today. Great packing job, took me almost 5 minutes to open it! Thanks again, Steve

08-24-2011, 04:59 AM	#69
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB What shape is the rear bumper in. I need a perfectly straight one for my 87. I have one that is bent. Can you ship to the Chicago area?

08-28-2011, 09:24 AM	#73
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB parts arrive thanks

08-29-2011, 06:41 PM	#74
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Cutting this one up with in the week so if you need a part of the cab or anthing let me know quick. I have a whole other 77 3/4 ton truck that I will part out in a few months. I just need to be sure I have everything off that I need for my Suburban. I will make a new thread for that one when its time.

09-01-2011, 07:29 PM	#75
catfishtn Registered User Join Date: Jun 2005 Location: Gallatin, TN Posts: 11	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Any chance the rear bumper brackets are good? If so, are they the thick type? 3/8 - 1/2 inch, flat w/4 holes, two on each end? Some lady hit me this morning and broke both of them without damaging the bumper!! I live in Nashville, will you ship? Thanks Joe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.