back on the 1950 after 10 yrs being stopped - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevette · 01-09-2012, 03:43 AM

Quote:

Originally Posted by 2dwn4u

Dude that truck is going to be sick with that set up, do you have a build thread?

I will start one when I get around to building the frame. I've been collecting the suspension parts for a couple of years and now have most of what I need to start. It's a C5 rear suspension and a C6 Z06 front. I'm using C6 Z06 brakes all around.

BlueJeep · 01-10-2012, 12:00 AM

Quote:

Originally Posted by 2dwn4u

Thanks, its been alot of work and we still have alot of sanding to do, got the out side going next we are going to block sand the outside reprimer for its 2nd coat of high build primer. Once thats done we are going to take the doors off and focus on finishing up the dash, door jambs, and firewall.

What did it take to get that rear seam you welded so crisp? Did you have to fill up to it or what's the secret? Looks fantastic!

2dwn4u · 01-10-2012, 12:14 AM

Quote:

Originally Posted by BlueJeep

What did it take to get that rear seam you welded so crisp? Did you have to fill up to it or what's the secret? Looks fantastic!

We used a mig welder, then we grinded the weld down being careful not to remove alot of material and cleaned up the grove with a metal file. I finished it off using a fine cut off wheel and masking tape to give me a nice line, I used the cut off wheel right in the center of the grove but used it at a lower speed.

reaper71 · 01-10-2012, 10:36 AM

Project is moving along nicly looking forward to see more...keep us informed on the other build thread.

Mark...

mrchevy1950 · 01-11-2012, 10:11 PM

George here are some pics of the Heidts with coil overs

2dwn4u · 01-13-2012, 02:38 AM

Earl,
Looking good bro John and I are going to be at the shop this weekend finishing up the door jambs and the firewall then next week we will be free , want to hook up with you and check it out in person, Let me know if you want to off the iroc wheels =) keep up the good work bud.

George

2dwn4u · 01-15-2012, 07:32 PM

Got the door jambs done for now along with the dash, 1st coat of high build primer is on. Got some epoxy on the firewall and complete interior sheetmetal, we will be doing the bodywork on firewall when we mate the cab to its chassis. well looks like we are going to give the bodywork a break and moving onto the chassis.

**youngrodder** · 01-15-2012, 07:39 PM

Looking very nice....
What a difference to get everthing in one color huh?

Marc

mrchevy1950 · 01-15-2012, 10:20 PM

Looks good George.

1950foru · 01-15-2012, 10:59 PM

Hey mr Chevy what's the plans on pluging all the holes and vents
Posted via Mobile Device

mrchevy1950 · 01-16-2012, 12:42 AM

All done with that. I am going to keep the cowl and side vents

2dwn4u · 01-22-2012, 12:40 AM

So today my cousin picked up an original frame. the frame will be going over to the blasters to get all cleaned up. Its going to be getting a Scott's Superslam IFS, and a 4 link we will be posting pics as we go,,, enjoy.

69CST-V · 01-26-2012, 12:56 AM

Just moved over to AD side. Starting to look for inspiration and you have me inspired. Mad skill man. Nice work.

1950foru · 02-01-2012, 02:35 AM

Ifs super slam has been ordered from scotts
Posted via Mobile Device

reid601 · 02-01-2012, 03:29 AM

Looking good man! Can't wait to see how its gonna come out!

2dwn4u · 02-10-2012, 12:51 AM

So the frame got sandblasted and the Scotts IFS superslam has been ordered now John is welding up all the holes and going to be boxing it all in.

99 to Life · 02-10-2012, 10:26 AM

what a beautiful thing!!

focusedontheprize · 02-10-2012, 11:27 AM

2dwn4u - the truck is coming along really nice. Stellar body work on it. Definitely subscribed on this one.

That Cobra R in the background in your earlier pictures - are you working on that or your buddy? BF Goodrich's Cobra R has been on my wall since the release of that car.

2dwn4u · 02-11-2012, 06:17 AM

Quote:

Originally Posted by focusedontheprize

2dwn4u - the truck is coming along really nice. Stellar body work on it. Definitely subscribed on this one.

That Cobra R in the background in your earlier pictures - are you working on that or your buddy? BF Goodrich's Cobra R has been on my wall since the release of that car.

The 2000 Cobra R belongs to my buddy it has less than 6k miles on it, its part of his collection the 65 Riv is also his.

2dwn4u · 02-20-2012, 01:39 AM

boxing in the frame has begun, John has been working a little bit every night on it getting it ready for the Scotts front end , which should be here soon.

1950foru · 03-13-2012, 01:05 PM

Hey Earl do u reamber the front measurement u put that mustang2 on there is Alot of different number if u don't reamber me and my cuz will come pay u a vist
Posted via Mobile Device

2dwn4u · 10-02-2012, 06:34 PM

Well its been a while, but my cuz has been working on his frame a little at a time and its finally getting there,,,,,he has cut and moved in the frame rails in the back half in order to clear a wider tire, made a custom C-notch and has been boxing up the whole frame.....

2dwn4u · 10-02-2012, 06:37 PM

more pics

99 to Life · 10-02-2012, 06:44 PM

Looks great, glad to see you back on it.

xpickup · 10-02-2012, 09:51 PM

2dwn4u, rear notch looks great. I love the rounded shape.

Shannon

01-10-2012, 10:36 AM	#54
reaper71 Registered User Join Date: Nov 2011 Location: West Plains Missouri Posts: 2,088	Re: back on the 1950 after 10 yrs being stopped Project is moving along nicly looking forward to see more...keep us informed on the other build thread. Mark... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=645774 Project Orangepeel 52 A.D. http://67-72chevytrucks.com/vboard/s...d.php?t=653337 John's LS 49 dodge http://67-72chevytrucks.com/vboard/s...d.php?t=655780 Blake's 67 GMC LS stepside http://67-72chevytrucks.com/vboard/s...d.php?t=690527 Reed 78 FJ40 Rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=733259 Barger's 78 FJ40

01-11-2012, 10:11 PM	#55
mrchevy1950 Registered User Join Date: May 2005 Location: San Jose, CA Posts: 25	Re: back on the 1950 after 10 yrs being stopped George here are some pics of the Heidts with coil overs Attached Images

01-13-2012, 02:38 AM	#56
2dwn4u Registered User Join Date: Jan 2009 Location: Santa Clara, CA Posts: 69	Re: back on the 1950 after 10 yrs being stopped Earl, Looking good bro John and I are going to be at the shop this weekend finishing up the door jambs and the firewall then next week we will be free , want to hook up with you and check it out in person, Let me know if you want to off the iroc wheels =) keep up the good work bud. George

01-15-2012, 07:32 PM	#57
2dwn4u Registered User Join Date: Jan 2009 Location: Santa Clara, CA Posts: 69	Re: back on the 1950 after 10 yrs being stopped Got the door jambs done for now along with the dash, 1st coat of high build primer is on. Got some epoxy on the firewall and complete interior sheetmetal, we will be doing the bodywork on firewall when we mate the cab to its chassis. well looks like we are going to give the bodywork a break and moving onto the chassis. Attached Images

01-15-2012, 07:39 PM	#58
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: back on the 1950 after 10 yrs being stopped Looking very nice.... What a difference to get everthing in one color huh? Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

01-15-2012, 10:20 PM	#59
mrchevy1950 Registered User Join Date: May 2005 Location: San Jose, CA Posts: 25	Re: back on the 1950 after 10 yrs being stopped Looks good George.

01-15-2012, 10:59 PM	#60
1950foru Registered User Join Date: Aug 2011 Location: Santa Clara ca Posts: 19	Re: back on the 1950 after 10 yrs being stopped Hey mr Chevy what's the plans on pluging all the holes and vents Posted via Mobile Device

01-16-2012, 12:42 AM	#61
mrchevy1950 Registered User Join Date: May 2005 Location: San Jose, CA Posts: 25	Re: back on the 1950 after 10 yrs being stopped All done with that. I am going to keep the cowl and side vents

01-22-2012, 12:40 AM	#62
2dwn4u Registered User Join Date: Jan 2009 Location: Santa Clara, CA Posts: 69	Re: back on the 1950 after 10 yrs being stopped So today my cousin picked up an original frame. the frame will be going over to the blasters to get all cleaned up. Its going to be getting a Scott's Superslam IFS, and a 4 link we will be posting pics as we go,,, enjoy. Attached Images

01-26-2012, 12:56 AM	#63
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: back on the 1950 after 10 yrs being stopped Just moved over to AD side. Starting to look for inspiration and you have me inspired. Mad skill man. Nice work. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

02-01-2012, 02:35 AM	#64
1950foru Registered User Join Date: Aug 2011 Location: Santa Clara ca Posts: 19	Re: back on the 1950 after 10 yrs being stopped Ifs super slam has been ordered from scotts Posted via Mobile Device

02-01-2012, 03:29 AM	#65
reid601 Registered User Join Date: Nov 2010 Location: Gulf Shores, AL Posts: 31	Re: back on the 1950 after 10 yrs being stopped Looking good man! Can't wait to see how its gonna come out! __________________ 1950 Chevy 3100 5 window (project) 1963 Chevy C10 (project) 2006 Dodge Ram SRT/10(535HP/DailyDriver)

02-10-2012, 12:51 AM	#66
2dwn4u Registered User Join Date: Jan 2009 Location: Santa Clara, CA Posts: 69	Re: back on the 1950 after 10 yrs being stopped So the frame got sandblasted and the Scotts IFS superslam has been ordered now John is welding up all the holes and going to be boxing it all in. Attached Images

02-10-2012, 10:26 AM	#67
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: back on the 1950 after 10 yrs being stopped what a beautiful thing!! __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

02-10-2012, 11:27 AM	#68
focusedontheprize Registered User Join Date: Feb 2012 Location: CA Posts: 846	Re: back on the 1950 after 10 yrs being stopped 2dwn4u - the truck is coming along really nice. Stellar body work on it. Definitely subscribed on this one. That Cobra R in the background in your earlier pictures - are you working on that or your buddy? BF Goodrich's Cobra R has been on my wall since the release of that car.



Register or Log In To remove these advertisements.

02-20-2012, 01:39 AM	#70
2dwn4u Registered User Join Date: Jan 2009 Location: Santa Clara, CA Posts: 69	Re: back on the 1950 after 10 yrs being stopped boxing in the frame has begun, John has been working a little bit every night on it getting it ready for the Scotts front end , which should be here soon. Attached Images

03-13-2012, 01:05 PM	#71
1950foru Registered User Join Date: Aug 2011 Location: Santa Clara ca Posts: 19	Re: back on the 1950 after 10 yrs being stopped Hey Earl do u reamber the front measurement u put that mustang2 on there is Alot of different number if u don't reamber me and my cuz will come pay u a vist Posted via Mobile Device

10-02-2012, 06:34 PM	#72
2dwn4u Registered User Join Date: Jan 2009 Location: Santa Clara, CA Posts: 69	Re: back on the 1950 after 10 yrs being stopped Well its been a while, but my cuz has been working on his frame a little at a time and its finally getting there,,,,,he has cut and moved in the frame rails in the back half in order to clear a wider tire, made a custom C-notch and has been boxing up the whole frame..... Attached Images

10-02-2012, 06:37 PM	#73
2dwn4u Registered User Join Date: Jan 2009 Location: Santa Clara, CA Posts: 69	Re: back on the 1950 after 10 yrs being stopped more pics Attached Images

10-02-2012, 06:44 PM	#74
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: back on the 1950 after 10 yrs being stopped Looks great, glad to see you back on it. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

10-02-2012, 09:51 PM	#75
xpickup Registered User Join Date: Jan 2007 Location: York, Pa. Posts: 1,386	Re: back on the 1950 after 10 yrs being stopped 2dwn4u, rear notch looks great. I love the rounded shape. Shannon __________________ 48 Panel Truck 1948 Chevy / S10 1954 Chevy / S10 1951 Chevy / C4 47 Step van Lowered 1996 Dually

Register or Log In To remove these advertisements.