GA 72 cheyenne super parting - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kellytheaker · 10-04-2011, 07:01 PM

yes some good shots of these vents would help - rubber and chrome and the only reason i asked for the separation of the panels was for shipping - i am considering just the inserts and chrome surround and are they straight - no dents just the rub on the drive side ? thanks - aqny good antennae and non air controls ? just asking

**southern parts** · 10-05-2011, 07:30 PM

pics for deadheadnm & kellytheaker

pete - i think i can fit everything in a large flat rate box for shipping.i have the bolts for the doorhandles and seat. send a pic of the part you need on the aux wiring.

kellytheaker-vent pics, i will separate wodgrain & trim for shipping, no help on the antenna, the only non a/c heater control i have left $30.

**southern parts** · 10-05-2011, 07:32 PM

more pics

**DeadheadNM** · 10-05-2011, 08:17 PM

Woody thanks for the pics. The harness looks good as far as I can tell and I'll take it with the bolts, etc. I will post a pic of the aux harness parts I'm after from the other truck later tonight.

Also, in post #17 I indicated an early interest in the woodgrain inserts if you'd seperate and I would take them. Kelly and Woody what would be the best thing to do? I don't need the metal trim and I have a driver set of woodgrain panels that I can part with not quite as nice as these.

Thanks, Pete

**DeadheadNM** · 10-05-2011, 09:26 PM

Woody, what I’m after are the three red/pink large gauge wires/connectors that should be partly wrapped into the front harness and easily separated as they're taped together as shown. The pink wire goes through the firewall to the fuse box. The smaller pic I borrowed from a board member post that shows some of the wires and where they’re found.

**southern parts** · 10-05-2011, 10:07 PM

I think i have the harness, or part of the harness your looking for, i`ll check tomorrow.
as far as the woodgrain panels go. if Kelly buys them, the price is still $100, i`m only separating from the panels to help with shipping costs.

**DeadheadNM** · 10-05-2011, 10:20 PM

Good deal Woody. If you have those aux harness parts I'll take them.

The panels are all Kelly's!

Thanks, Pete

HeavyMetalChevy · 10-05-2011, 10:49 PM

Quote:

Originally Posted by 72peace

Sorry, I have a med blue truck and the visors and headliner are dk blue or at least darker than the truck, I have seen numerous photos of med blue interiors where the dash pad, door panels, visors, etc. match the med blue. That's what i'm looking for. again sorry for the 20 questions. I just want them to match, i'm OCD that way. That's why I was looking for photos of them together.

Thanks and sorry for the trouble,

OCD just stands for Obviously Correct Data!!!l lol I think all us "junkies" have a bit of the OCD bug... I just started and I am on this site minimum of 4 hrs daily. lol

HeavyMetalChevy · 10-05-2011, 10:54 PM

Quote:

Originally Posted by southern parts

more pics

Heater controls... i will take them all... They are part of my deepest desires and obsession!!! lol pm pricing or whatever it takes... 47043

Thanks,
duane

**allchevy58** · 10-05-2011, 11:49 PM

I'm interested in the seat belts, what condition are the plastic covers in? How much for shipping to 89508? Thanks

**southern parts** · 10-06-2011, 06:12 AM

heavymetalchevy- i have several heater controls in pieces (i rebuild them) but the one in the pic is the only one thats complete right now (not rebuilt).
if kelly passes, i can ship to you in a med. flat rate box for total of $40

allchevy58- here`s a couple pics of the heads, the retractors work fine and the covers aren`t broke i`ll get pics of those this evening when i get back from work. i think these will also fit in a med. flat rate box. $85 shipped

HeavyMetalChevy · 10-06-2011, 08:19 AM

Quote:

Originally Posted by southern parts

heavymetalchevy- i have several heater controls in pieces (i rebuild them) but the one in the pic is the only one thats complete right now (not rebuilt).
if kelly passes, i can ship to you in a med. flat rate box for total of $40

allchevy58- here`s a couple pics of the heads, the retractors work fine and the covers aren`t broke i`ll get pics of those this evening when i get back from work. i think these will also fit in a med. flat rate box. $85 shipped

Go to love the medium flat rate boxes huh? I should be back with you by days end.. I pm you payment info. Pending Kelly's arrangement of course!

Thanks,
Duane

**southern parts** · 10-06-2011, 08:36 PM

deadhead- pete , i have the complete harness, add $25 for a total of $100 shipped ( i can fit all in a large flat rate box)

allchevy58- seatbelt pics. i haven`t tried to clean them.

**southern parts** · 10-06-2011, 08:39 PM

forgot harness pics

**DeadheadNM** · 10-06-2011, 08:40 PM

Woody - awesome. I want the harness. How much? Thanks, Pete

**DeadheadNM** · 10-06-2011, 08:44 PM

Whoops! just saw the total. Sold. Send PM with payment details when you can.

HeavyMetalChevy · 10-06-2011, 09:04 PM

Quote:

Originally Posted by HeavyMetalChevy

Go to love the medium flat rate boxes huh? I should be back with you by days end.. I pm you payment info. Pending Kelly's arrangement of course!

Thanks,
Duane

anything broken on heater control we spoke of? and you heard back from kellY on it?

**southern parts** · 10-06-2011, 09:31 PM

nothing broke, needs cleaned. i`m going to give kelly til tomorrow then it`s yours.

HeavyMetalChevy · 10-06-2011, 09:36 PM

Quote:

Originally Posted by southern parts

nothing broke, needs cleaned. i`m going to give kelly til tomorrow then it`s yours.

sounds good send paypal request to remimartin257@aol.com pending kelly.

kellytheaker · 10-07-2011, 10:33 PM

i will take the heater control and please provide a shipping price to N0B-2K0 so i know a total thanks . And any attatchment bolts ,clips , sockets that may have been part of the assembly .

HeavyMetalChevy · 10-07-2011, 11:14 PM

Quote:

Originally Posted by kellytheaker

i will take the heater control and please provide a shipping price to N0B-2K0 so i know a total thanks . And any attatchment bolts ,clips , sockets that may have been part of the assembly .

3 days kelly??? come on man??? yo uhad me in limbo and suspense!!!! lol totally kidding bro.. .enjoy the controls.. .southern is great business.

"DWANIAC"

speedfreak369 · 10-08-2011, 06:13 PM

how much for the front susp. and rear end and brakes

**southern parts** · 10-08-2011, 08:14 PM

kelly- 27.95 for shipping on the heater control. the woodgrain inserts are not dented, they ae faded some, the rub area at the drivers handle, and some chips in the woodgrain around the edges. I`m not going to separate until you confirm to purchase, so i wont be able to check shipping cost, i charge only actual shipping.

speedfreak369- have you checked with member heehawracing ? i think he`s down around Fayetteville

HeavyMetalChevy · 10-08-2011, 08:58 PM

Quote:

Originally Posted by southern parts

kelly- 27.95 for shipping on the heater control. the woodgrain inserts are not dented, they ae faded some, the rub area at the drivers handle, and some chips in the woodgrain around the edges. I`m not going to separate until you confirm to purchase, so i wont be able to check shipping cost, i charge only actual shipping.

speedfreak369- have you checked with member heehawracing ? i think he`s down around Fayetteville

still in line for heater control

kellytheaker · 10-09-2011, 04:43 PM

that sounds heavy but i will be pleased to have a good unit , please provide any attatching screws and or clips . MIne has been apart or modified so who knows what i will meet , all i know is it has a switch for the fan speeds on the control and its an indication of modifications . I believe your panels are inexpensive but will leave for someone else and the vents well - could be nicer but also inexpensive and since both are spares i will leave . thanks and please forward your name and address for money to be sent . thanks

10-04-2011, 07:01 PM	#51
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: 72 cheyenne super parting yes some good shots of these vents would help - rubber and chrome and the only reason i asked for the separation of the panels was for shipping - i am considering just the inserts and chrome surround and are they straight - no dents just the rub on the drive side ? thanks - aqny good antennae and non air controls ? just asking

10-05-2011, 07:30 PM	#52
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting pics for deadheadnm & kellytheaker pete - i think i can fit everything in a large flat rate box for shipping.i have the bolts for the doorhandles and seat. send a pic of the part you need on the aux wiring. kellytheaker-vent pics, i will separate wodgrain & trim for shipping, no help on the antenna, the only non a/c heater control i have left $30. Attached Images

10-05-2011, 07:32 PM	#53
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting more pics Attached Images

10-05-2011, 08:17 PM	#54
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,364	Re: 72 cheyenne super parting Woody thanks for the pics. The harness looks good as far as I can tell and I'll take it with the bolts, etc. I will post a pic of the aux harness parts I'm after from the other truck later tonight. Also, in post #17 I indicated an early interest in the woodgrain inserts if you'd seperate and I would take them. Kelly and Woody what would be the best thing to do? I don't need the metal trim and I have a driver set of woodgrain panels that I can part with not quite as nice as these. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-05-2011, 09:26 PM	#55
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,364	Re: 72 cheyenne super parting Woody, what I’m after are the three red/pink large gauge wires/connectors that should be partly wrapped into the front harness and easily separated as they're taped together as shown. The pink wire goes through the firewall to the fuse box. The smaller pic I borrowed from a board member post that shows some of the wires and where they’re found. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-05-2011, 10:07 PM	#56
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting I think i have the harness, or part of the harness your looking for, i`ll check tomorrow. as far as the woodgrain panels go. if Kelly buys them, the price is still $100, i`m only separating from the panels to help with shipping costs.

10-05-2011, 10:20 PM	#57
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,364	Re: 72 cheyenne super parting Good deal Woody. If you have those aux harness parts I'll take them. The panels are all Kelly's! Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-05-2011, 11:49 PM	#60
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,432	Re: 72 cheyenne super parting I'm interested in the seat belts, what condition are the plastic covers in? How much for shipping to 89508? Thanks

10-06-2011, 06:12 AM	#61
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting heavymetalchevy- i have several heater controls in pieces (i rebuild them) but the one in the pic is the only one thats complete right now (not rebuilt). if kelly passes, i can ship to you in a med. flat rate box for total of $40 allchevy58- here`s a couple pics of the heads, the retractors work fine and the covers aren`t broke i`ll get pics of those this evening when i get back from work. i think these will also fit in a med. flat rate box. $85 shipped Attached Images

10-06-2011, 08:36 PM	#63
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting deadhead- pete , i have the complete harness, add $25 for a total of $100 shipped ( i can fit all in a large flat rate box) allchevy58- seatbelt pics. i haven`t tried to clean them. Attached Images

10-06-2011, 08:39 PM	#64
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting forgot harness pics Attached Images

10-06-2011, 08:40 PM	#65
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,364	Re: 72 cheyenne super parting Woody - awesome. I want the harness. How much? Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-06-2011, 08:44 PM	#66
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,364	Re: 72 cheyenne super parting Whoops! just saw the total. Sold. Send PM with payment details when you can. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-06-2011, 09:31 PM	#68
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting nothing broke, needs cleaned. i`m going to give kelly til tomorrow then it`s yours.

10-07-2011, 10:33 PM	#70
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: 72 cheyenne super parting i will take the heater control and please provide a shipping price to N0B-2K0 so i know a total thanks . And any attatchment bolts ,clips , sockets that may have been part of the assembly .



Register or Log In To remove these advertisements.

10-08-2011, 06:13 PM	#72
speedfreak369 Registered User Join Date: Nov 2009 Location: GA/AL Posts: 290	Re: 72 cheyenne super parting how much for the front susp. and rear end and brakes __________________ 1965 c10 short stepside (dad's project) 1967 c10 fleetside 350/350 trans (my baby)

10-08-2011, 08:14 PM	#73
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 72 cheyenne super parting kelly- 27.95 for shipping on the heater control. the woodgrain inserts are not dented, they ae faded some, the rub area at the drivers handle, and some chips in the woodgrain around the edges. I`m not going to separate until you confirm to purchase, so i wont be able to check shipping cost, i charge only actual shipping. speedfreak369- have you checked with member heehawracing ? i think he`s down around Fayetteville

10-09-2011, 04:43 PM	#75
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: 72 cheyenne super parting that sounds heavy but i will be pleased to have a good unit , please provide any attatching screws and or clips . MIne has been apart or modified so who knows what i will meet , all i know is it has a switch for the fan speeds on the control and its an indication of modifications . I believe your panels are inexpensive but will leave for someone else and the vents well - could be nicer but also inexpensive and since both are spares i will leave . thanks and please forward your name and address for money to be sent . thanks

Register or Log In To remove these advertisements.