OR Parting out 1969 C30 cab-chassis motorhome

[tll74]

more pics

[tll74]

Originally Posted by badcaveman

do you have a good 70 grill and how much?

I only have the inner in very nice condition. No cracks or chips.

[1972K20]

Yea, the shipping is a killer on the springs. I would like to have them. Thanks for checking though.

[zicc1835]

will you take 70 shipped ?

Originally Posted by tll74

All the u-bolts and hardware came off with no problem. shipping is 44.00

They have impressions from a old school registration holder. I'll load pics of them later this evening.

Column looks nice. Good paint, indicator nice, switch nice, and typical pits in handles. 65.00 plus 16.00 shipping. Pics to later when I get home.

Each pring weighs 100.00 lbs. 82.00 each via UPS. ouch! I would like to get 85.00 for the springs with the aux helpers.


Your covered on the tray and valve. I haven't got the belts cleaned yet. I'll post pics tomorrow after there cleaned and price.

If I have missed someone just speak up. Thanks, Tom

[tll74]

vicc1835, I'd do 80 shipped.

[zicc1835]

thanks but ill pass shipping kills it ....

Originally Posted by tll74

vicc1835, I'd do 80 shipped.

[tll74]

totally understand. It's the dimentional size that kills it. Maybe I'll put it on my 69 C30 car hauler.

[timberjim36]

what condition are the upper control arms and how much for shipping to 02538
and was it a 133" wheel base with an auto if so what about the front drive shaft

[zicc1835]

i have a friend by Newberg he says he is 1.5 hrs.from Springfield, wonder if he can ship grey hound for me would it make sense then .....don't know when i will be out your way again i would put it on the plane with me give the TSA something to talk about well if i can make something work ill see if it is still available
thanks
Jess

Originally Posted by tll74

totally understand. It's the dimentional size that kills it. Maybe I'll put it on my 69 C30 car hauler.

[tll74]

Originally Posted by timberjim36

what condition are the upper control arms and how much for shipping to 02538
and was it a 133" wheel base with an auto if so what about the front drive shaft

I didn't pull the front suspension yet. They look fine. I'll get a shipping cost soon. The wheel base was lengthed 18 inches. The manufacture added a second carrier bearing and driveline forward of the original front half. It looks to me they removed the front yoke and made up the 18 inches with the new front half. So in short I believe the original front half is still stock.

Originally Posted by zicc1835

i have a friend by Newberg he says he is 1.5 hrs.from Springfield, wonder if he can ship grey hound for me would it make sense then .....don't know when i will be out your way again i would put it on the plane with me give the TSA something to talk about well if i can make something work ill see if it is still available
thanks
Jess

Jess, I get to Portland often so if there was a drop point near I-5 I could drop it. Just let me know. I'm sure it will be laying around for a while.

[tll74]

Originally Posted by va72longhorn

Originally Posted by va72longhorn
when you get a chance, can you take a couple close ups of the battery tray? Also, price on the fuel tank selector valve?

With closer look figure 27.50 shipped 5.00 extra with valve.



HeyTom, I kinda lost track where we are there. If you still have the Aux tray and fuel valve assembly, I'll take both for the 32.50 shipped. If you still have them, I could use the two saddle seat belts that are by the doors, with the boots. What would you take for those, throwing them in the same box? No hurry, just like to know Im covered.

Seat belt pics. Some pitting on the male buckles and minor scratch or two in the plastic covers overall they look pretty good. Retractors work nice. It may raise the shipping a couple bucks. 84.50 shipped for all of it.

[va72longhorn]

Belts look nice. Are you in a position to where you can separate them? I really only need the two bottom ones. Or better yet, $100 shipped for everything in the same box?

[tll74]

Originally Posted by va72longhorn

Belts look nice. Are you in a position to where you can separate them? I really only need the two bottom ones. Or better yet, $100 shipped for everything in the same box?

I'll take the 100.00 offer, but my offer was only 84.50 shipped for everything you asked for. 84.50 will be just fine. LMK

[va72longhorn]

lol..... youre putting in the same box as the aux battery tray and fuel valve, that was already set aside for me, remember? I was talking about the whole pile for $100. ( youre just knocking $16 off)

[va72longhorn]

LOL.... are you saying $84.50 for all of it???

I'm slow sometimes

[tll74]

Originally Posted by va72longhorn

LOL.... are you saying $84.50 for all of it???

I'm slow sometimes

Yes Sir, I am. I acid dipped the tray and brackets for you too! No Rust!

[tll74]

Originally Posted by timberjim36

what condition are the upper control arms and how much for shipping to 02538
and was it a 133" wheel base with an auto if so what about the front drive shaft

Shippping on the uppers are 26.89 plus 40.00 for the arms. I think this was the long wheel base cab-chassis and extended 18 inches. The 133 would be the short wheel base cab-chassis (60 inches cab to axle center). thanks

[tll74]

Originally Posted by c1069

POMO sent today. Do you have more pics from the sun visors above?

Where you interested in the visors? I've held up on shipping the wiring waiting on the visors. I'll do 30.00 plus the extra in shipping.

[c1069]

do you have pics of them?

[tooter]

Bottom of page 2

[no moa]

Tom got my frame parts today, A+++ sir, thank you very much! I couldn't be happier.

[zicc1835]

Tom,
i will be in Seattle the week of the 5th march i have a friend in Portland also and a place to drop or i could meet you maybe if the sway bar is still available also will take the visors if they are still around let me know if any of that works i have some parts at Livrats gonna put on the plane also
Jess

Originally Posted by tll74

I didn't pull the front suspension yet. They look fine. I'll get a shipping cost soon. The wheel base was lengthed 18 inches. The manufacture added a second carrier bearing and driveline forward of the original front half. It looks to me they removed the front yoke and made up the 18 inches with the new front half. So in short I believe the original front half is still stock.


Jess, I get to Portland often so if there was a drop point near I-5 I could drop it. Just let me know. I'm sure it will be laying around for a while.

[tll74]

Originally Posted by zicc1835

Tom,
i will be in Seattle the week of the 5th march i have a friend in Portland also and a place to drop or i could meet you maybe if the sway bar is still available also will take the visors if they are still around let me know if any of that works i have some parts at Livrats gonna put on the plane also
Jess

Jess, still have it all. I'm going thru Portland on that Monday morning in route to Hermiston and then LA Grande. I could drop them off some where close to the 205 hwy. Will be short on time so it would have to be drop and run. It is a long trip to get done in one day. Let me know what works for you. Thanks, Tom

[zicc1835]

im sending my friend an email now i get into SeTac on the 6th i will P M u when i get more info from him on either a drop or him to meet u do u still have the visors too, ill take them if so
thanks
Jess

Originally Posted by tll74

Jess, still have it all. I'm going thru Portland on that Monday morning in route to Hermiston and then LA Grande. I could drop them off some where close to the 205 hwy. Will be short on time so it would have to be drop and run. It is a long trip to get done in one day. Let me know what works for you. Thanks, Tom

[tll74]

Originally Posted by zicc1835

im sending my friend an email now i get into SeTac on the 6th i will P M u when i get more info from him on either a drop or him to meet u do u still have the visors too, ill take them if so
thanks
Jess

Yea I do, there put away with all my others.