SC WTB speed warning rear tin with brass pin

[VA72C10]

Originally Posted by Classic Bowties

I was not trying to do anything crafty nor did I say I wanted to deal with it thru pm's. I was not tryin to sneek anything by the governing body here, he was inline for all the parts that I offered to invoice him for. It has been posted in the past that different rules apply to "FS threads" VS. "WTB threads" anyhow. Below are the two pm'ed mystery messages between jaros44sr and I. Mel

Hey Mel, thanks for posting that also. Wasn't accusing you of doing anything wrong...just answering jaros44sr's question

III.All sales must be posted in thread, a reply stating who is in line is also suggested. Accepting sales via Private Messages will result in confusion within the thread and is strictly prohibited.

That's the rule in question for those wondering
And Mel's been doing a GREAT job keeping everyone updated about who's in line.

Thanks everyone for keeping things civil and Mel for offering some nice, hard to find parts at very fair prices

[Classic Bowties]

Originally Posted by VA72C10

Hey Mel, thanks for posting that also. Wasn't accusing you of doing anything wrong...just answering jaros44sr's question

That's the rule in question for those wondering
And Mel's been doing a GREAT job keeping everyone updated about who's in line.

Thanks everyone for keeping things civil and Mel for offering some nice, hard to find parts at very fair prices

VA, no problem as I thought that I was doing a good at job keeping everything fairly straight on who was in line and who had paid for what and then *Ka-Pow* this issue with 1971short4x4 came up. I had outlined in great detail and explained fairly well what had happened with 1971short in post #42 of this wtb thread, most guys would have said tough luck "you seen the pics, you said yould take and then you sent payment". I have offered to try and sell the first tin to another in-line member and even also offered to just refund his paypal payment and move on which he said no to. I am boxing up your buzzer and harness now, is the address that paypal sent me along with payment confirmation uptodate? Mel

[jaros44sr]

Originally Posted by VA72C10

Hey Mel, thanks for posting that also. Wasn't accusing you of doing anything wrong...just answering jaros44sr's question



That's the rule in question for those wondering
And Mel's been doing a GREAT job keeping everyone updated about who's in line.

Thanks everyone for keeping things civil and Mel for offering some nice, hard to find parts at very fair prices

Ok just what i need on a monday morning going to a 8 am meeting....here's the deal

Deal was done on post #41, i now own a 69 sw head, tin w/grounding clamp, adjustment cable and dash cover for location of hole, once Classic Bowties submits the invoice to my paypal.

I am not building a showtruck, so i can give up the 69 tin for the 67, if Mel will blast it and sell it to me for 50.00 as he said he would....

Alright, is everyone happy on the left coast?

Ok folks, lets move along, nothing happening here

[Classic Bowties]

Originally Posted by 1971short4X4

I said all I'm after is a good tin for my build so there are more then one way to hopefully make everyone happy
Posted via Mobile Device

That has to be the understatement of the year, listed below is status on the first pieced out S/W cluster. Mel

2/27 Updated order of commitment/interest as it sits now on parting this 67 s/w setup:

#1 - Speed alert speedo head. *Sold & Shipped* to 70shortfleet
#2 - Speed warning rear tin setup. *Sold* to 1971short4X4 ? ? ?
#3 - Speed warning buzzer and harness. *Sold & Shipped* to 70shortfleet
#4 - Speed alert adjustment cable setup. *Sold & Shipped* to 71blksuper4x4

[Classic Bowties]

Originally Posted by jaros44sr

Ok just what i need on a monday morning going to a 8 am meeting....here's the deal

Deal was done on post #41, i now own a 69 sw head, tin w/grounding clamp, adjustment cable and dash cover for location of hole, once Classic Bowties submits the invoice to my paypal.

I am not building a showtruck, so i can give up the 69 tin for the 67, if Mel will blast it and sell it to me for 50.00 as he said he would....

Alright, is everyone happy on the left coast?

Ok folks, lets move along, nothing happening here

Tell me about it!!!
Jaros, sorry deal was not done in post #41, you called out/got in line for the parts listed there but WES/Classic Heartbeat was first up for a tin before you so the call to give up the 69 s/w rear tin is not yours to make as you are behind him. Next up on your above qoute, nowhere did I say that I would blast it AND sell it to you for 50.00, if you re-read post #50 you will see the posted pm was the offer to sell the 67 s/w rear tin at a discounted amount to a less picky dash builder (SO WE COULD ALL MOVE ON) and it would not include the speedo head grounding clip and mounting screws. Mel

[Classic Heartbeat]

I'll take the one you offered me Mell. WES

[jaros44sr]

Originally Posted by Classic Bowties

Tell me about it!!!
Jaros, sorry deal was not done in post #41, you called out/got in line for the parts listed there but WES/Classic Heartbeat was first up for a tin before you so the call to give up the 69 s/w rear tin is not yours to make as you are behind him. Next up on your above qoute, nowhere did I say that I would blast it AND sell it to you for 50.00, if you re-read post #50 you will see the posted pm was the offer to sell the 67 s/w rear tin at a discounted amount to a less picky dash builder (SO WE COULD ALL MOVE ON) and it would not include the speedo head grounding clip and mounting screws. Mel

Ok, misunderstanding, i thought wes was in line for the second tin you found in the attic, my fault, wasnt paying attention
sooo, there are no tins left?

[Classic Bowties]

Originally Posted by jaros44sr

Ok, misunderstanding, i thought wes was in line for the second tin you found in the attic, my fault, wasnt paying attention
sooo, there are no tins left?

No problem, in the big picture he was 2nd inline for a tin setup so the choice was his. Yes there is a tin available now that Wes has made the call, as I had stated in post #50, if you want the first as listed 67 s/w rear tin without the (pictured in post #6) little head grounding strap and screws then I will discount it to $50. and then go ahead and invoice you for the 67 rear tin, the 69 s/w speedo head & the 69 s/w adjustment cable. Mel

[Classic Bowties]

Originally Posted by Classic Heartbeat

I'll take the one you offered me Mell. WES

Wes, your rear s/w tin just left on the FedEx truck, you should have it in your hands tomorrow. Thanks for a simple transaction, Mel

[jaros44sr]

Originally Posted by classic bowties

no problem, in the big picture he was 2nd inline for a tin setup so the choice was his. Yes there is a tin available now that wes has made the call, as i had stated in post #50, if you want the first as listed 67 s/w rear tin without the (pictured in post #6) little head grounding strap and screws then i will discount it to $50. And then go ahead and invoice you for the 67 rear tin, the 69 s/w speedo head & the 69 s/w adjustment cable. Mel

ok

[70shortfleet]

Mel, the S/W head and buzzer/harness all arrived in great shape, thanks for the fast shipping and I sure am glad I was ahead of all the cofusion thanks again Les

[Classic Bowties]

Originally Posted by jaros44sr

ok

jaros, I just sent you an invoice through paypal on 02/27 for the following pieces, the 67 rear tins, the 69 s/w speedo head & the 69 s/w adjustment cable. Already all boxed up and labeled for shipment, will go out as soon as payment is made.

Originally Posted by 70shortfleet

Mel, the S/W head and buzzer/harness all arrived in great shape, thanks for the fast shipping and I sure am glad I was ahead of all the cofusion thanks again Les

Les, thank you too for a simple speedy transaction. Glad everything arrived safely, like I had originally said all of these were nice OE S/W parts in tested & working condition. Thanks again and I look forward to any future dealings with you, Mel.

[Classic Heartbeat]

Wes, your rear s/w tin just left on the FedEx truck, you should have it in your hands tomorrow. Thanks for a simple transaction, Mel

Thanks Mel, As always it's a pleasure doing business with you. WES

[jaros44sr]

Originally Posted by Classic Bowties

jaros, I just sent you an invoice through paypal on 02/27 for the following pieces, the 67 rear tins, the 69 s/w speedo head & the 69 s/w adjustment cable. Already all boxed up and labeled for shipment, will go out as soon as payment is made.



Les, thank you too for a simple speedy transaction. Glad everything arrived safely, like I had originally said all of these were nice OE S/W parts in tested & working condition. Thanks again and I look forward to any future dealings with you, Mel.

payment sent

[Classic Bowties]

Originally Posted by jaros44sr

payment sent

Ok, that now wraps up both speed warning dashes being parted. Your s/w parts went out fedex today. All parts are now SOLD & SHIPPED , each s/w dash cluster is listed below with what went to who. Thanks guys, Mel.

2/27 Updated SOLD/PURCHASED list on the parting of the 1st dash/67 speed warning setup:

#1 - Speed alert speedo head. *Sold & Shipped* to 70shortfleet
#2 - Speed warning rear tin setup. *Sold & Shipped* to jaros44sr
#3 - Speed warning harness and non-op. buzzer. *Sold & Shipped* to 70shortfleet
#4 - Speed alert adjustment cable setup. *Sold & Shipped* to 71blksuper4x4



2/27 Updated SOLD/PURCHASED list on the parting of the 2nd dash/69 speed warning setup:

#1 - Speed alert speedo head. *Sold & Shipped* to jaros44sr
#2 - Speed warning rear tin setup. *Sold & Shipped* to 1971short4x4
#3 - Speed warning buzzer and harness. *Sold & Shipped* to VA72C10
#4 - Speed alert adjustment cable setup. *Sold & Shipped* to jaros44sr

[PT'S 70 CST]

Hey Mel now that all this drama is over and all of the vultures got part of the carcass I bet you are glad I started this thread.


PT

[jaros44sr]

Hey Mel, got a problem! Just got done talking to Wes aboutmy tilt column bearings. SW came up and it seems hes getting the rusty 67 tin. If that is the case, then you under billed me...lmk how i can resolve this situation at your earliest

[Classic Bowties]

Originally Posted by jaros44sr

Hey Mel, got a problem! Just got done talking to Wes aboutmy tilt column bearings. SW came up and it seems hes getting the rusty 67 tin. If that is the case, then you under billed me...lmk how i can resolve this situation at your earliest

OH NO NOT AGAIN!

Jaros, no its all straight if you have a look at post #65, I updated each parted cluster with who got what and you got the discounted 67 rear s/w tin. I sent Wes the extra one that had a hole drilled in the center tach area as it's going to be going on a s/w tach cluster anyhow. Mel