CA Partial part of 1971 GMC 1 TON 2WD Cab and Chassie

[dbash]

Originally Posted by RaTcheTmasTer

Pictures of engine?
Thanks

http://i.imgur.com/5jUVL.jpg
http://i.imgur.com/RKCyM.jpg

here are some pics but its sold already.
Posted via Mobile Device

[dbash]

I bought all new A/C components including electric knob controls so my entire A/C system is for sale.

Let me know what your interested in and I will take pics if necessary and price.

Thanks for being serious before you post that your interested. I am not giving anything away you be fair and I will be as well.
Posted via Mobile Device

[dbash]

Originally Posted by 71 GMCDRVR

Any word from 67-72 yet??? does he want the grille if not I'll take it and I can pick it up next weekend!!

Grill, eybrows and Light hoops SOLD to GMCDRIVER.

Thanks Bud.
Posted via Mobile Device

[dbash]

Green Tint original vent windows. $25 buck each + shipping. I have the glass windows to match as well. $30 each + shipping.

http://i.imgur.com/q4ZNF.jpg
http://i.imgur.com/B6C9W.jpg
Posted via Mobile Device

[dbash]

Original Rear Stepside Fender. I replaced it with another original I found on Craigs List because of the two dents shown in the photos. I simply dont have the talent to fix it myself.
No Rust at all California truck.
$150 bucks.

http://i.imgur.com/jEVno.jpg
http://i.imgur.com/NbVyZ.jpg
Posted via Mobile Device

[dbash]

Originally Posted by dbash

Rolling Chassie without flat bed $400.00 with bed add $100 bucks.
http://i.imgur.com/ztd8N.jpg
http://i.imgur.com/WYf0K.jpg

Here are some additional Chassis pics for your viewing pleasure.....
http://i.imgur.com/el4RI.jpg
http://i.imgur.com/b1cTu.jpg
http://i.imgur.com/4Kkfn.jpg
http://i.imgur.com/2mCAG.jpg

Front Bumper $50.00 Price Reduced to $35 bucks the rust is surface only its straight.
Front Grill $50.00 SOLD
http://i.imgur.com/4iGSO.jpg


Door Sills $10.00 ea
Seat Belts with Bolts $100.00 Price Reduced to $ 60.00
Sun Visors With Screws and Clips $ 40.00 Price Reduced to $30.00
Horn Button $10.00
Ash Tray Assembly $15.00 Price Reduced to $10.00
Mirror Assembly $20.00 Price Reduced to $10.00
Coat Hanger $10.00

http://i.imgur.com/KsYKM.jpg
http://i.imgur.com/htmHw.jpg
Posted via Mobile Device

If your interested in more then one item make an offer on them in total I will consider it. not going to go any lower then ten bucks an item otherwise.

Thanks for your interest.
Posted via Mobile Device

[RaTcheTmasTer]

Originally Posted by dbash

http://i.imgur.com/5jUVL.jpg
http://i.imgur.com/RKCyM.jpg

here are some pics but its sold already.
Posted via Mobile Device

Strange . . . did you sell it locally and not on the board??
I don't remember anyone inquiring about it on here.

??

[dbash]

Originally Posted by dbash

fuel selector assembly includes under cab valve not pictiured here. $20.00 Price Reduced $10.00
http://i.imgur.com/ITlnL.jpg
http://i.imgur.com/h2GfA.jpg

Fuel Cell, sending unit and fastners. $50.00 Price Reduced $25.00
http://i.imgur.com/IAQvo.jpg
http://i.imgur.com/faRK5.jpg
http://i.imgur.com/RdzRG.jpg
Posted via Mobile Device

Posted via Mobile Device

[dbash]

Originally Posted by RaTcheTmasTer

Strange . . . did you sell it locally and not on the board??
I don't remember anyone inquiring about it on here.

??

Your correct no one else has inquired about it on here.
I sold the entire motor and transmission for 600 bucks prior to having permission to list on here at all and when I did finally list the truck on here I failed to mention that the Motor and Transmission were already sold. I apologized for that previously and I apologize to you again now. I am sorry. I did not mean to waste anyones time.
Posted via Mobile Device

[old Chevy guy]

I would be interested in the roters at 25 apiece Depending on the shipping and of course if they have enough meat left on them to be cut some more. I could calculate the shipping if I had some idea what they weigh. I understand you need to wait and I don't blame you. I wish you were a few thousand miles closer Id buy it myself. I'm in no rush so take as much time as you need and weigh all your options.

[RaTcheTmasTer]

Originally Posted by dbash

Your correct no one else has inquired about it on here.
I sold the entire motor and transmission for 600 bucks prior to having permission to list on here at all and when I did finally list the truck on here I failed to mention that the Motor and Transmission were already sold. I apologized for that previously and I apologize to you again now. I am sorry. I did not mean to waste anyones time.
Posted via Mobile Device

No problem. I was surprised but not a big deal.

Good luck on the rest of your sales.

[Shaun1162]

Originally Posted by dbash

Carrier bearing cross member $50 bucks plus shipping.

Thanks

I'll take the crossmember for $50.

Thanks, Shaun

[dbash]

Originally Posted by old Chevy guy

I would be interested in the roters at 25 apiece Depending on the shipping and of course if they have enough meat left on them to be cut some more. I could calculate the shipping if I had some idea what they weigh. I understand you need to wait and I don't blame you. I wish you were a few thousand miles closer Id buy it myself. I'm in no rush so take as much time as you need and weigh all your options.

Originally Posted by Shaun1162

I'll take the crossmember for $50.

Thanks, Shaun

I will pull these parts out and get shipping costs for both of you. I will check the roters as well Chevy Guy. Thanks to both of you
Posted via Mobile Device

[dbash]

Originally Posted by BIGJAKE97

interested in the motor mount towers if stillavailable. if so how much shipped to 94538? did the zbar/bellcrank go with the engine tranny? thanks, jake

Originally Posted by too much stuff

In line for the engine towers.

Big Jake I PM'd you regarding the motor mount towers to verify your interest.

Too Much Stuff your next in line for them if he declines.

Thanks Guys.
Posted via Mobile Device

[tanman722001]

Im going to pass on the front coil spring.as i can get new for around $120.

[BIGJAKE97]

Originally Posted by dbash

Yes the bellcrank went with the motor and tranny.

25 bucks for both motor mount towers + shipping.

Sorry I am new to this so I dont know how much shipping will run but I will get you the best deal I can and will pack the shipping label with the parts.

Thanks
Posted via Mobile Device

yes, i'll take the motor mounts. just pm your payment info after you get a shipping price to 94538. or pm me if you need the complete address. thanks, jake

[dbash]

Originally Posted by BIGJAKE97

yes, i'll take the motor mounts. just pm your payment info after you get a shipping price to 94538. or pm me if you need the complete address. thanks, jake

will do Jake. Thanks very much
Posted via Mobile Device

[dbash]

Originally Posted by tanman722001

Im going to pass on the front coil spring.as i can get new for around $120.

Fair enough, what about 35 bucks plus shipping for both?
Posted via Mobile Device

[tanman722001]

see what shipping would be to zip 27028

[Shaun1162]

Originally Posted by dbash

I will pull these parts out and get shipping costs for both of you. I will check the roters as well Chevy Guy. Thanks to both of you
Posted via Mobile Device

Forgot to mention, my zipcode is 03287.

Thanks, Shaun

[dbash]

Originally Posted by tanman722001

see what shipping would be to zip 27028

Originally Posted by Shaun1162

Forgot to mention, my zipcode is 03287.

Thanks, Shaun

Will Do tanman thanks

Thanks for the zip Shaun.
Posted via Mobile Device

[dbash]

Originally Posted by dbash

Will Do tanman thanks

tanman the front coil springs weigh 20lbs each and shipping is $30 each. that brings your total to $95 for both shipped UPS Ground.

Thanks for the zip Shaun.
Posted via Mobile Device

Shaun1162 The Carrier Bearing Crossmember (is a pain to remove but its done :-)) weighs 26 lbs and shipping is $30. That brings your total to $80 for UPS Ground.

I will PM you both my info for payment assuming your still interested.
Posted via Mobile Device

[dbash]

Originally Posted by Shaun1162

Forgot to mention, my zipcode is 03287.

Thanks, Shaun

sorry for the double post but your I did not get your quote in my last post with shipping cost.

The carrier bearing crossmember weighs 26 lbs and shipping is $30. UPS Ground.

I will PM you payment information.
Posted via Mobile Device

[dbash]

Originally Posted by BIGJAKE97

yes, i'll take the motor mounts. just pm your payment info after you get a shipping price to 94538. or pm me if you need the complete address. thanks, jake

Transmission Cross Member and Motor Mounts sold. Thanks BIGJAKE97 :-)
Posted via Mobile Device

[dbash]

Originally Posted by old Chevy guy

I would be interested in the roters at 25 apiece Depending on the shipping and of course if they have enough meat left on them to be cut some more. I could calculate the shipping if I had some idea what they weigh. I understand you need to wait and I don't blame you. I wish you were a few thousand miles closer Id buy it myself. I'm in no rush so take as much time as you need and weigh all your options.

old Chevy guy, Thanks for your patience thus far ;-) The front rotors have been pulled the truck odomoter has 58 thousand miles on it. the PO claimed those were original miles and after seeing these rotors and the rear drums I believe her now (her husband had long since passed.) I am happy to send you a close up of them if you would like. Hell I will even mic them.

Thats the good news.... these bad boys weigh in at 48 pounds each and shipped to you is $53 each via UPS Ground. If you have a cheaper option I am open to it.

Via this method your total would be $156. I have no idea what these things cost new so I await your comments.
Posted via Mobile Device