WY 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue panels - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 03-10-2012, 09:34 PM

Quote:

Originally Posted by Danny Bost

Let me know, I do want them.
Thanks Danny

Hi Danny, here are the column pics. It is nice and tight and the turn signal switch feels good. Handles are nice driver shape. This is without wheel of course since it's junk. Let's give ScottH until tomorrow morning to decide. Thanks, Sharpie

Danny Bost · 03-10-2012, 09:40 PM

OK. I am a pastor and will be at church until about 1:00 tomorrow afternoon, but I will check in then.
Thanks Danny

Danny Bost · 03-10-2012, 09:41 PM

I would also be interested in the kickdown linkage if you have it.

*sharpie1972* · 03-10-2012, 09:42 PM

Quote:

Originally Posted by Danny Bost

OK. I am a pastor and will be at church until about 1:00 tomorrow afternoon, but I will check in then.
Thanks Danny

OK Danny, if ScottH passes consider it yours. If he takes it I will have another one available soon. Thanks, Sharpie

*sharpie1972* · 03-10-2012, 09:47 PM

Quote:

Originally Posted by 48richard

Sharpie,

Next in line for any good upper and lower side moldings.

Richard

Hi Richard, no good bed trim. Front half of truck has driver quality pieces. I will post pics and prices tomorrow. Thanks, Sharpie

*sharpie1972* · 03-10-2012, 09:52 PM

Mirror pics for W.Higgins. These look to be about 13" from the glass. $75 shipped for the pair. Thanks, Sharpie

REEDS 72 · 03-10-2012, 10:27 PM

Hi hey do you know if the raido works?

*sharpie1972* · 03-10-2012, 10:31 PM

Quote:

Originally Posted by REEDS 72

Hi hey do you know if the raido works?

Untested so far. I will be dropping a battery in tomorrow to test electrics and to see if it will start. Thanks, Sharpie

cdp · 03-10-2012, 10:41 PM

Sharpie, Are you parting the bed, interested in all the floor supports and rear crossmember and also front bed panel if not all beat up. Still got cargo lamp?
Thanks Chris

*sharpie1972* · 03-10-2012, 10:48 PM

Quote:

Originally Posted by cdp

Sharpie, Are you parting the bed, interested in all the floor supports and rear crossmember and also front bed panel if not all beat up. Still got cargo lamp?
Thanks Chris

His Chris, yes I will be parting bed, but not right away. I'll check the front panel condition for you. Still have cargo lamp. Thanks, Sharpie

HeavyMetalChevy · 03-10-2012, 11:00 PM

Sharpie...How will you ship entire grille??? as far as packaging? Not to concerned with damage as much as saving ship cost due to weight. Thanks "DWANIAC"

*sharpie1972* · 03-10-2012, 11:03 PM

Quote:

Originally Posted by HeavyMetalChevy

Sharpie...How will you ship entire grille??? as far as packaging? Not to concerned with damage as much as saving ship cost due to weight. Thanks "DWANIAC"

I've shipped quite a few UPS or Greyhound in crates I build. I stand 1x4's or 1x6's on edge and cover with 1/4" ply. They are very sturdy and don't add tooooo much weight. Sharpie

HeavyMetalChevy · 03-10-2012, 11:20 PM

got one tach gauge you can throw in (not free) and I think we can strike it rich!!! lol
Is the 2nd pic in this thread the worst spot on the outer 69-70 grille? If so lets talk... Glad to see some "clear" pics finally.

*sharpie1972* · 03-10-2012, 11:30 PM

Quote:

Originally Posted by HeavyMetalChevy

got one tach gauge you can throw in (not free) and I think we can strike it rich!!! lol
Is the 2nd pic in this thread the worst spot on the outer 69-70 grille? If so lets talk... Glad to see some "clear" pics finally.

Same kind of dingers on the other side. I will post some more pics tomorrow when I have light to take some good shots. Thanks, Sharpie

SDC10 · 03-10-2012, 11:48 PM

Hi Sharpie

I'm ready to go on the grille assembly. Has Lolife99 made a decision yet ??

Thanks, Rick

*sharpie1972* · 03-10-2012, 11:50 PM

Quote:

Originally Posted by SDC10

Hi Sharpie

I'm ready to go on the grille assembly. Has Lolife99 made a decision yet ??

Thanks, Rick

Hi Rick, I need to get the inner grill removed tomorrow and check it over closely for him. Thanks, Sharpie

SDC10 · 03-10-2012, 11:58 PM

Thanks, Please keep me posted. I'll take both if Lolife99 decides not to get it. I really only need the outer grille if your willing to split it up.

Rick

Bethewaz · 03-11-2012, 02:11 AM

Quote:

Originally Posted by W. Higgins

Below are photos of what I have and also showing the old holes plugged with bolts, but if yours are factory, suitable for towing a trailer, and less obnoxious than what I have now, I think I'd like them anyway. The lower arms on mine go all the way down to the trim and look like the originals did, too. Driving through the narrow streets of Philly yesterday was a real nail biter.

Is the correct term for these West Coast Jr. or something different? I thought West Coast were the type that hang from the window frame, like these:

http://67-72chevytrucks.com/vboard/s...d.php?t=402787

These white ones are identical to the ones on my friends early seventies ford 1 ton chassis.

**lolife99** · 03-11-2012, 07:30 AM

Quote:

Originally Posted by SDC10

Hi Sharpie

I'm ready to go on the grille assembly. Has Lolife99 made a decision yet ??

Thanks, Rick

Sharpie,... I want the inner grille if it is nice.
(doesn't have to be perfect)
I'm mainly looking for the correct original appearance for my '70 stepside.

I trust your judgement.
Just let me know.

cdp · 03-11-2012, 09:31 AM

SHarpie, I will take the cargo lamp, antenna and rear glass mldg w/gasket,I also need the brake booster support rod from the cab to the rear mounting bracket under hood. The bed pcs, we will talk later. How nice are the inner front wheel houses? and the rear bed side filler panels that bolt to bedside and to the wheelhouses at the rear of wheel opening. I am looking for blast and paint condition, Thanks Chris ps. just got back from trip on getting my a/c cab was 820 mi round trip but its nice

*sharpie1972* · 03-11-2012, 10:05 AM

Quote:

Originally Posted by cdp

SHarpie, I will take the cargo lamp, antenna and rear glass mldg w/gasket,I also need the brake booster support rod from the cab to the rear mounting bracket under hood. The bed pcs, we will talk later. How nice are the inner front wheel houses? and the rear bed side filler panels that bolt to bedside and to the wheelhouses at the rear of wheel opening. I am looking for blast and paint condition, Thanks Chris ps. just got back from trip on getting my a/c cab was 820 mi round trip but its nice

Hi Chris, glad you scored a nice cab! I will be checking bed component condition today. This truck was well used so I'm guessing none are quite blast and paint condition. It will be a bit before I have inner wheel wells out to check over closely. I will do a quick look in the battery area on the passenger side and let you know. Are you still in need of outside handles? Thanks, Sharpie

**ScottH** · 03-11-2012, 10:10 AM

Gonna pass on the steering column.

Scott

*sharpie1972* · 03-11-2012, 10:16 AM

Quote:

Originally Posted by ScottH

Gonna pass on the steering column.

Scott

Hi Scott, thanks for the reply. Danny you are up on the complete column and shift linkage package. I will also check the condition of the kickdown assembly for you today. Thanks, Sharpie

67gmcstepside · 03-11-2012, 11:07 AM

Did the door panels sell? If not shipping to 08527

*sharpie1972* · 03-11-2012, 11:14 AM

Quote:

Originally Posted by 67gmcstepside

Did the door panels sell? If not shipping to 08527

Still available. $115 shipped. Thanks, Sharpie

03-10-2012, 09:40 PM	#52
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa OK. I am a pastor and will be at church until about 1:00 tomorrow afternoon, but I will check in then. Thanks Danny __________________ Danny 71 SWB

03-10-2012, 09:41 PM	#53
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa I would also be interested in the kickdown linkage if you have it. __________________ Danny 71 SWB

03-10-2012, 09:52 PM	#56
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Mirror pics for W.Higgins. These look to be about 13" from the glass. $75 shipped for the pair. Thanks, Sharpie Attached Images

03-10-2012, 10:27 PM	#57
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Hi hey do you know if the raido works?

03-10-2012, 10:41 PM	#59
cdp Registered User Join Date: Apr 2011 Location: AKRON,OH Posts: 81	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Sharpie, Are you parting the bed, interested in all the floor supports and rear crossmember and also front bed panel if not all beat up. Still got cargo lamp? Thanks Chris

03-10-2012, 11:00 PM	#61
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Sharpie...How will you ship entire grille??? as far as packaging? Not to concerned with damage as much as saving ship cost due to weight. Thanks "DWANIAC" __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-10-2012, 11:20 PM	#63
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa got one tach gauge you can throw in (not free) and I think we can strike it rich!!! lol Is the 2nd pic in this thread the worst spot on the outer 69-70 grille? If so lets talk... Glad to see some "clear" pics finally. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-10-2012, 11:48 PM	#65
SDC10 Registered User Join Date: Feb 2012 Location: SoCal Posts: 29	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Hi Sharpie I'm ready to go on the grille assembly. Has Lolife99 made a decision yet ?? Thanks, Rick

03-10-2012, 11:58 PM	#67
SDC10 Registered User Join Date: Feb 2012 Location: SoCal Posts: 29	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Thanks, Please keep me posted. I'll take both if Lolife99 decides not to get it. I really only need the outer grille if your willing to split it up. Rick

03-11-2012, 09:31 AM	#70
cdp Registered User Join Date: Apr 2011 Location: AKRON,OH Posts: 81	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa SHarpie, I will take the cargo lamp, antenna and rear glass mldg w/gasket,I also need the brake booster support rod from the cab to the rear mounting bracket under hood. The bed pcs, we will talk later. How nice are the inner front wheel houses? and the rear bed side filler panels that bolt to bedside and to the wheelhouses at the rear of wheel opening. I am looking for blast and paint condition, Thanks Chris ps. just got back from trip on getting my a/c cab was 820 mi round trip but its nice

03-11-2012, 10:10 AM	#72
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Gonna pass on the steering column. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-11-2012, 11:07 AM	#74
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: 1970 Chevy Custom parting. Tinted chrome vents. Radio. Cargo lamp. Deluxe blue pa Did the door panels sell? If not shipping to 08527



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.