1958 LS2 with C4 front and rear - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wutnxt · 06-24-2012, 09:57 PM

Quote:

Originally Posted by lt155ruck

Question.. are you going to run a front sway bar? I've got a Flatout front kit in mine and am looking for sway bar solutions.

Well I haven't got that far just yet.....trying finish a few things out and working on it like a madman....I can't put the bar in the back..this I know for sure because of the notch. It just doesn't work back there for sure, but haven't even looked at what to do up front yet.

wutnxt · 06-27-2012, 11:48 PM

Some update....

Moved itso took some pictres....still not runing but getting closer

wutnxt · 06-27-2012, 11:51 PM

Found the bumper....managed to get it all mounted and ready to roll

Kim57 · 06-28-2012, 12:00 AM

Looks pretty slick sitting on the trailer.
Kim

wutnxt · 06-28-2012, 12:08 AM

Quote:

Originally Posted by Kim57

Looks pretty slick sitting on the trailer.
Kim

Thanks man...I can't wait to drive it and get it finished

**oldman3** · 06-28-2012, 09:10 AM

Looks super....Jim

wutnxt · 06-28-2012, 10:02 AM

Quote:

Originally Posted by oldman3

Looks super....Jim

Thanks....it's been a busy couple of weeks.

lt155ruck · 06-28-2012, 01:39 PM

Damn, you are Pounding it out. I wish mine would advance that quickly. Do you think you will be done for the Langley Good Times show?

wutnxt · 06-28-2012, 02:18 PM

Ya i hope to have the 58 done and moving around in about 3 weeks....and I really would like to have my 65 street truck done as well ......I might take my dually too if i can get the paint all touched up before then.

**Dieselwrencher** · 06-28-2012, 03:48 PM

Nice work. How's the dually treating you any how?

wutnxt · 06-28-2012, 08:33 PM

Quote:

Originally Posted by Dieselwrencher

Nice work. How's the dually treating you any how?

The dually is awesome.....That crate 454 rocks, lays frame and all the rubber you want. It leaves second gear when it shifts....I have been pulled over 3 times in 5 weeks,before that i hadn't been pulled over in like 7 years. It gets a lot more attention then I thought it would

wutnxt · 06-29-2012, 06:23 PM

Well ....
I am short the section of harness inside the vechile for the drive by wire....The auto wrecker doesn't want to pull it out because it comes with most of the other wire harness....ie lots of work to get it out. So kinda stuck with out that right now so until something happens there i am trying to button up the rest of things.....

Chevette · 06-29-2012, 09:41 PM

Quote:

Originally Posted by wutnxt

Well ....
I am short the section of harness inside the vechile for the drive by wire....The auto wrecker doesn't want to pull it out because it comes with most of the other wire harness....ie lots of work to get it out. So kinda stuck with out that right now so until something happens there i am trying to button up the rest of things.....

eBay will most likely have what you're looking for. I got the FBW for a C6 complete and it was cheap on eBay.

Chevette · 06-29-2012, 09:53 PM

Try this page. http://www.ebay.com/sch/i.html?_nkw=...t=33694&_fln=1

wutnxt · 06-29-2012, 10:32 PM

Quote:

Originally Posted by Chevette

Try this page. http://www.ebay.com/sch/i.html?_nkw=...t=33694&_fln=1

Hey thats a good idea.......But I guess I need something compatible with a 2007 trailblazer which the engine and pedal came out of ?

Groyd · 06-29-2012, 10:56 PM

Call these guys. Super nice over the phone and very knowledgeable on LS swaps.

http://www.hotrodlane.cc/

wutnxt · 06-30-2012, 12:35 AM

Quote:

Originally Posted by Groyd

Call these guys. Super nice over the phone and very knowledgeable on LS swaps.

http://www.hotrodlane.cc/

Thanks for that link there is a ton of information there to read over

wutnxt · 07-01-2012, 12:49 PM

Happy canada day to all of my canadain Brothers....

Chevette · 07-01-2012, 01:38 PM

Quote:

Originally Posted by wutnxt

Happy canada day to all of my canadain Brothers....

Yes! Lets go out in the freakin' rain and celebrate. Think I'll just go into the garage and weld some.....

wutnxt · 07-01-2012, 01:47 PM

Quote:

Originally Posted by Chevette

Yes! Lets go out in the freakin' rain and celebrate. Think I'll just go into the garage and weld some.....

I am outa town for a couple of days ......I wish i coud be in my shop right now with my welder.....oh how i wish

Lolyin58 · 07-01-2012, 01:40 PM

I love both trucks. They are just sick!!!! Keep up the great work. Happy Canada Day.
Posted via Mobile Device

wutnxt · 07-01-2012, 01:49 PM

Quote:

Originally Posted by Lolyin58

I love both trucks. They are just sick!!!! Keep up the great work. Happy Canada Day.
Posted via Mobile Device

Thanks man....
I am trying to get some more stuff finished.....don't get me wrong building them is half the fun....but it sure would be nice to be driving something

Lolyin58 · 07-01-2012, 02:04 PM

Yes sure would be great to driving mine on Canada day as well, but there is still some wrenching to do!
Posted via Mobile Device

wutnxt · 07-01-2012, 02:38 PM

Quote:

Originally Posted by Lolyin58

Yes sure would be great to driving mine on Canada day as well, but there is still some wrenching to do!
Posted via Mobile Device

Been my expierence there is always wrenching to do .....lol

wutnxt · 07-13-2012, 08:09 PM

Well progress has been slow....it's been crazy buzy...My 65 street truck has offically recieved paint on the inside of the cab....and the outside should be getting painted as we speak. Too much going on...too many builds....i think i lost a portion of my mind and am currently trying to get it back. The 58 got new exhaustthe otherday and it looks pretty bad a$$....I ran 3" and dumped it out just infront of the rear tires. We placed a balance tube in it as well....I can't wait to hear it run. Remounted the tank and pump for the air set up, had to make changes to fit the 3 " gear. Ran more wire and am getting closer to getting things buttoned up. Big job with lots of little things to finish

06-27-2012, 11:48 PM	#2
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1958 LS2 with C4 front and rear Some update.... Moved itso took some pictres....still not runing but getting closer Attached Images __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-27-2012, 11:51 PM	#3
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1958 LS2 with C4 front and rear Found the bumper....managed to get it all mounted and ready to roll Attached Images __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-28-2012, 12:00 AM	#4
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1958 LS2 with C4 front and rear Looks pretty slick sitting on the trailer. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

06-28-2012, 09:10 AM	#6
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,570	Re: 1958 LS2 with C4 front and rear Looks super....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-28-2012, 01:39 PM	#8
lt155ruck Registered User Join Date: Jul 2010 Location: Victoria,B.C. Canada Posts: 175	Re: 1958 LS2 with C4 front and rear Damn, you are Pounding it out. I wish mine would advance that quickly. Do you think you will be done for the Langley Good Times show?

06-28-2012, 02:18 PM	#9
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1958 LS2 with C4 front and rear Ya i hope to have the 58 done and moving around in about 3 weeks....and I really would like to have my 65 street truck done as well ......I might take my dually too if i can get the paint all touched up before then. __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-28-2012, 03:48 PM	#10
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,171	Re: 1958 LS2 with C4 front and rear Nice work. How's the dually treating you any how? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-29-2012, 06:23 PM	#12
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1958 LS2 with C4 front and rear Well .... I am short the section of harness inside the vechile for the drive by wire....The auto wrecker doesn't want to pull it out because it comes with most of the other wire harness....ie lots of work to get it out. So kinda stuck with out that right now so until something happens there i am trying to button up the rest of things..... __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-29-2012, 09:53 PM	#14
Chevette Registered User Join Date: Nov 2011 Location: Langley, BC Posts: 702	Re: 1958 LS2 with C4 front and rear Try this page. http://www.ebay.com/sch/i.html?_nkw=...t=33694&_fln=1

06-29-2012, 10:56 PM	#16
Groyd Registered User Join Date: Apr 2009 Location: Edmond, OK Posts: 395	Re: 1958 LS2 with C4 front and rear Call these guys. Super nice over the phone and very knowledgeable on LS swaps. http://www.hotrodlane.cc/ __________________ 1951 Chevy 3100 1957 Chevy 3200 1971 2WD Blazer

07-01-2012, 12:49 PM	#18
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1958 LS2 with C4 front and rear Happy canada day to all of my canadain Brothers.... __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

07-01-2012, 01:40 PM	#21
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: 1958 LS2 with C4 front and rear I love both trucks. They are just sick!!!! Keep up the great work. Happy Canada Day. Posted via Mobile Device

07-01-2012, 02:04 PM	#23
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: 1958 LS2 with C4 front and rear Yes sure would be great to driving mine on Canada day as well, but there is still some wrenching to do! Posted via Mobile Device

07-13-2012, 08:09 PM	#25
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1958 LS2 with C4 front and rear Well progress has been slow....it's been crazy buzy...My 65 street truck has offically recieved paint on the inside of the cab....and the outside should be getting painted as we speak. Too much going on...too many builds....i think i lost a portion of my mind and am currently trying to get it back. The 58 got new exhaustthe otherday and it looks pretty bad a$$....I ran 3" and dumped it out just infront of the rear tires. We placed a balance tube in it as well....I can't wait to hear it run. Remounted the tank and pump for the air set up, had to make changes to fit the 3 " gear. Ran more wire and am getting closer to getting things buttoned up. Big job with lots of little things to finish __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.