IN 1961 ? GMC 4000 Parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 11-07-2012, 12:36 PM

Quote:

Originally Posted by McCoyAZ

Money sent via PayPal

thanks

Payment received but I need to verify your Zip code before shipping. PM sent

Thanks

**Todd68Chevy** · 11-07-2012, 01:55 PM

Quote:

Originally Posted by McCoyAZ

Money sent via PayPal

thanks

Hood pin is in the mail. Let me know if there is any issues. Thanks

**chevy_man5** · 11-07-2012, 03:41 PM

Would you sell the (2) grey knobs you have (wiper and headlights I think) separate, or would you want to sell the switches too?

If knobs only, how much to 83642?

Thanks!

**Todd68Chevy** · 11-07-2012, 03:53 PM

Quote:

Originally Posted by chevy_man5

Would you sell the (2) grey knobs you have (wiper and headlights I think) separate, or would you want to sell the switches too?

If knobs only, how much to 83642?

Thanks!

I have no problem selling them seperate because the switches are probably junk any way. I will get them checked as soon as I can. Do they thread on or do they press on?

**chevy_man5** · 11-07-2012, 04:47 PM

The wiper should have a set screw, and the headlight should have a release tab on the switch. I would have to look at mine tonight to make sure on the headlight one.

The headlight knob may just unscrew too, like I said, I am not sure. LOL

Thanks!

**Todd68Chevy** · 11-09-2012, 08:52 AM

Quote:

Originally Posted by rcbildr

Are the heater controls available?

Quote:

Originally Posted by chevy_man5

Would you sell the (2) grey knobs you have (wiper and headlights I think) separate, or would you want to sell the switches too?

If knobs only, how much to 83642?

Thanks!

I have not been able to get things checked out yet. I will get it done this weekend. Thanks

**chevy_man5** · 11-09-2012, 10:04 AM

No problem!

**Todd68Chevy** · 11-11-2012, 09:59 AM

Quote:

Originally Posted by rcbildr

Are the heater controls available?

The assy. looks pretty nice. One of the levers is broken but the others move. I have no idea if the fan swith works but I would guess it does not. The rivets look good. $25.00 plus shipping. Give me a zip code and I will see what I can do on shipping. Thanks

Quote:

Originally Posted by chevy_man5

Would you sell the (2) grey knobs you have (wiper and headlights I think) separate, or would you want to sell the switches too?

If knobs only, how much to 83642?

Thanks!

Knobs look pretty good. $9.00 shipped USPS First class mail or $12.00 shipped USPS Priority Mail. Thanks

**Todd68Chevy** · 11-11-2012, 10:01 AM

A few more pictures.

McCoyAZ · 11-11-2012, 12:26 PM

Got the pin and it fits perfectly.

Thanks very much.

**chevy_man5** · 11-11-2012, 12:41 PM

I'll take the knobs Todd.

If Rcbildr decides against the heater controls, I would be interested in a price on those shipped to 83642 also.

I'll hold off on paying for the knobs until you hear from Rcbildr.

Thanks!

rcbildr · 11-12-2012, 07:40 PM

PM sent on the heater controls. Thanks!!!

**Todd68Chevy** · 11-12-2012, 08:18 PM

Quote:

Originally Posted by chevy_man5

I'll take the knobs Todd.

If Rcbildr decides against the heater controls, I would be interested in a price on those shipped to 83642 also.

I'll hold off on paying for the knobs until you hear from Rcbildr.

Thanks!

The knobs are yours. I will let you know if the heater controls do not sell. Do you want me to hold the knobs until the heater controls are paid for? It will be a few days.

I thought I would also include the kick panel vents since you have all the others but I could not get them to come off. Do you know how they come off the cable? Thanks

Quote:

Originally Posted by rcbildr

PM sent on the heater controls. Thanks!!!

PM sent. Heater controls Sold pending payment. Thanks

**Todd68Chevy** · 11-12-2012, 08:19 PM

Quote:

Originally Posted by McCoyAZ

Got the pin and it fits perfectly.

Thanks very much.

Great to hear. Thanks.

**chevy_man5** · 11-12-2012, 09:44 PM

I do not know how the vent knobs come off. I tried to unscrew them, and they just spun. I actually don't need them, so no worries. I'll just go for the $9.00 First Class for the original two knobs. Just let me know when to send the money.

Thanks.

Mack B · 11-12-2012, 10:58 PM

Are the kick panel vents and covers in good shape and still available? Price and shipping to 36502 if so. Thanks!
Posted via Mobile Device

**Todd68Chevy** · 11-13-2012, 07:49 AM

Quote:

Originally Posted by chevy_man5

I do not know how the vent knobs come off. I tried to unscrew them, and they just spun. I actually don't need them, so no worries. I'll just go for the $9.00 First Class for the original two knobs. Just let me know when to send the money.

Thanks.

I turned them and pulled on them and they did not seem to want to come off mine either. I just thought if I could get them off I would throw them in the box. Thanks PM sent

Quote:

Originally Posted by Mack B

Are the kick panel vents and covers in good shape and still available? Price and shipping to 36502 if so. Thanks!
Posted via Mobile Device

I know when I was trying to get the cable knobs off, I noticed the covers have at least surface rust. The cables/ doors would not move when I was pulling on them. The truck is pretty rusty so I would guess they are poor but I will get them check out better as soon as I can and get back to you. Thanks

**Todd68Chevy** · 11-13-2012, 09:48 PM

Quote:

Originally Posted by Mack B

Are the kick panel vents and covers in good shape and still available? Price and shipping to 36502 if so. Thanks!
Posted via Mobile Device

The right side cover, vent door and door housing are rusted out. The left side vent and housing is rusted but not rusted out of soft anywhere I can find but the cover does have rusted and a couple small hole in one corner. If it is good enough and you are interested let me know and I will see about cost. Thanks

**Todd68Chevy** · 11-13-2012, 09:50 PM

Few more pictures

Mack B · 11-13-2012, 10:14 PM

I really appreciate the time and effort but I'm afraid they are a little rougher than I'd like, thank you tho
Posted via Mobile Device

**Todd68Chevy** · 11-13-2012, 10:59 PM

Quote:

Originally Posted by Mack B

I really appreciate the time and effort but I'm afraid they are a little rougher than I'd like, thank you tho
Posted via Mobile Device

No problem. I thought it probably would be. Thanks for asking.

**Todd68Chevy** · 11-15-2012, 11:40 AM

Quote:

Originally Posted by chevy_man5

I do not know how the vent knobs come off. I tried to unscrew them, and they just spun. I actually don't need them, so no worries. I'll just go for the $9.00 First Class for the original two knobs. Just let me know when to send the money.

Thanks.

Knobs are in the mail. The shipping was cheaper than estimated so I issued a refund of the difference. Thanks again, Todd

**chevy_man5** · 11-15-2012, 01:11 PM

Cool! Thanks Todd!!

**Todd68Chevy** · 11-16-2012, 07:56 AM

Quote:

Originally Posted by rcbildr

PM sent on the heater controls. Thanks!!!

rcbildr is not buying the heater controls at this time.

Quote:

Originally Posted by chevy_man5

I'll take the knobs Todd.

If Rcbildr decides against the heater controls, I would be interested in a price on those shipped to 83642 also.

I'll hold off on paying for the knobs until you hear from Rcbildr.

Thanks!

If you are still interested in the heater controls, they are yours. The shipping will be $11.35 for a total of $36.35- $2.50 (knob shipping) = $33.85 owed. Let me know. Thanks

**chevy_man5** · 11-16-2012, 11:56 AM

Sounds good.

Money is sent!

Thank you!

11-07-2012, 03:41 PM	#53
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts Would you sell the (2) grey knobs you have (wiper and headlights I think) separate, or would you want to sell the switches too? If knobs only, how much to 83642? Thanks! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-07-2012, 04:47 PM	#55
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts The wiper should have a set screw, and the headlight should have a release tab on the switch. I would have to look at mine tonight to make sure on the headlight one. The headlight knob may just unscrew too, like I said, I am not sure. LOL Thanks! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-09-2012, 10:04 AM	#57
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts No problem! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-11-2012, 10:01 AM	#59
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1961 ? GMC 4000 Parts A few more pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

11-11-2012, 12:26 PM	#60
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: 1961 ? GMC 4000 Parts Got the pin and it fits perfectly. Thanks very much. __________________ http://s994.photobucket.com/albums/af62/ScottAz2/

11-11-2012, 12:41 PM	#61
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts I'll take the knobs Todd. If Rcbildr decides against the heater controls, I would be interested in a price on those shipped to 83642 also. I'll hold off on paying for the knobs until you hear from Rcbildr. Thanks! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-12-2012, 07:40 PM	#62
rcbildr Registered User Join Date: Sep 2000 Location: Gold Bar, WA Posts: 1,216	Re: 1961 ? GMC 4000 Parts PM sent on the heater controls. Thanks!!! __________________ My Projects: 1960 GMC 1/2ton with 305 V6 (daily driver) 1963 Chevy 1/2ton 2wd...converting to 4x4 1967 Suburban 1/2ton 2wd My Girlfriends Projects 1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver) 1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam 1978 Camaro Z28

11-12-2012, 09:44 PM	#65
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts I do not know how the vent knobs come off. I tried to unscrew them, and they just spun. I actually don't need them, so no worries. I'll just go for the $9.00 First Class for the original two knobs. Just let me know when to send the money. Thanks. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-12-2012, 10:58 PM	#66
Mack B Registered User Join Date: Apr 2012 Location: L.ower A.labama Posts: 518	Re: 1961 ? GMC 4000 Parts Are the kick panel vents and covers in good shape and still available? Price and shipping to 36502 if so. Thanks! Posted via Mobile Device

11-13-2012, 09:50 PM	#69
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1961 ? GMC 4000 Parts Few more pictures Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

11-13-2012, 10:14 PM	#70
Mack B Registered User Join Date: Apr 2012 Location: L.ower A.labama Posts: 518	Re: 1961 ? GMC 4000 Parts I really appreciate the time and effort but I'm afraid they are a little rougher than I'd like, thank you tho Posted via Mobile Device

11-15-2012, 01:11 PM	#73
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts Cool! Thanks Todd!! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-16-2012, 11:56 AM	#75
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts Sounds good. Money is sent! Thank you! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.