Let's see your aftermarket or non stock steering wheel!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 02-16-2013, 10:28 AM

Heres mine in my blazer bout it a few years ago... 2 complaints are that its cold in the winter and hot in the summer.. Id really like to buy the half wrap to replace the hard plastic but as of yet have not seen just the wrap for sale..

shawno72 · 02-16-2013, 10:37 AM

If its a Foreversharp wheel go to their website or eBay and they sell just the wraps
Posted via Mobile Device

**FRENCHBLUE72** · 02-16-2013, 10:57 AM

Im looking for the box now I think its from apc... I guesss I have something to do this am now..

register · 02-16-2013, 11:20 AM

Quote:

Originally Posted by Lee H

Posted via Mobile Device
Posted via Mobile Device

That is awesome!!!
Do you have the part # ?
Where did you get it?
Is that a oer product?
What is the dish(depth)

Sorry so many questions
It's really hard to find the right wheel!!
Thanks in advance
Posted via Mobile Device

Lee H · 02-16-2013, 12:07 PM

Quote:

Originally Posted by register

That is awesome!!!
Do you have the part # ?
Where did you get it?
Is that a oer product?
What is the dish(depth)

Sorry so many questions
It's really hard to find the right wheel!!
Thanks in advance
Posted via Mobile Device

I got the kit from Brothers, comes in walnut, cherry, or black cushioned. Yes it is an OER product, very nice and great fit. Depth is about 3 inches. Wheel is about 16 inches in diameter.

register · 02-16-2013, 12:12 PM

Quote:

Originally Posted by Lee H

I got the kit from Brothers, comes in walnut, cherry, or black cushioned. Yes it is an OER product, very nice and great fit. Depth is about 3 inches. Wheel is about 16 inches in diameter.

I'm in ordering one today!
Hope it is the right one
Will post when I get it installed
Thanks lee H
Posted via Mobile Device

GTJ558 · 02-16-2013, 01:46 PM

Here's what i got

register · 02-16-2013, 01:53 PM

Quote:

Originally Posted by GTJ558

Here's what i got

what's the diameter?
i need larger cause i have no power steering...
that's a nice wheel swell....

GTJ558 · 02-16-2013, 01:57 PM

Quote:

Originally Posted by register

what's the diameter?
i need larger cause i have no power steering...
that's a nice wheel swell....

15" i think i bought the last one it shows out of stock

Wootdog · 02-16-2013, 04:57 PM

Later Model Cavalier wheel.

register · 02-19-2013, 01:55 PM

Quote:

Originally Posted by Lee H

I got the kit from Brothers, comes in walnut, cherry, or black cushioned. Yes it is an OER product, very nice and great fit. Depth is about 3 inches. Wheel is about 16 inches in diameter.

trying to order, would you have by chance to part #
they are saying it does not come in a kit.
Thanks again

Lee H · 02-19-2013, 02:40 PM

Quote:

Originally Posted by register

trying to order, would you have by chance to part #
they are saying it does not come in a kit.
Thanks again

Page 18 of their current catalog, part number STR00WD for walnut or cherry $349.99 (you specify which you want) and STR00BK for black cushion $269.99.

Lee H · 02-19-2013, 02:42 PM

Here's the link

http://www.brotherstrucks.com/products.asp?dept=1063

register · 02-19-2013, 02:46 PM

after all that they will not ship to Toronto Canada
will have to go to Classic industries.
Thanks again LeeH

67basketcase · 02-19-2013, 03:08 PM

Here's a unique one I ran across...........

**BIG ORANGE** · 02-19-2013, 04:01 PM

I've used this wheel on all the highend trucks I've built over the year's with much liking by the new owner's,,

**elpound** · 07-01-2016, 12:34 AM

I got my door emblems and horn button back a while ago. Looks better than new. Sent them to the shop to have installed. I have the Chevy walnut grain wheel.

**Already Gone** · 09-27-2016, 09:11 PM

Time for reboot of this thread. Here is mine a Le Carra double slot. Had it on my other truck form 2006 till I sold the truck in 2014. It now resides in my Highlander.

OregonNed · 09-28-2016, 12:42 AM

Recently pulled the Grant I had and mounted one of the Forever Sharp jobs...

**samkost** · 09-28-2016, 01:05 AM

Purchased, not yet installed for my '72 C10

jescates · 09-28-2016, 05:20 PM

Bought it with this one! Don't really care fit it much and when funds are there, will definitely be changing this one!

**Already Gone** · 09-28-2016, 05:55 PM

Quote:

Originally Posted by samkost

Purchased, not yet installed for my '72 C10

That'll look good in your truck. Where did you order it from and what's the diameter. Is it a Chevelle wheel ?

**samkost** · 09-28-2016, 06:55 PM

Yes it is a Chevelle,Camaro and Corvette style wheel.
I haven't actually measure its diameter...I think 15"?
Smaller than stock of course.

I got a great deal on mine locally.
Many vendors carry this style and I have seen them on Ebay also.

Here is an informational link with all styles of wheels and and different horn caps.

http://www.camaros.org/swheel.shtml

Good luck.

hardwaycooke · 09-28-2016, 09:30 PM

All Billet...powdercoated..custom horn button..

**raggedjim** · 09-28-2016, 09:40 PM

Another comfort grip wheel...

02-16-2013, 10:28 AM	#51
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: Let's see your aftermarket or non stock steering wheel!! Heres mine in my blazer bout it a few years ago... 2 complaints are that its cold in the winter and hot in the summer.. Id really like to buy the half wrap to replace the hard plastic but as of yet have not seen just the wrap for sale.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-16-2013, 10:37 AM	#52
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Let's see your aftermarket or non stock steering wheel!! If its a Foreversharp wheel go to their website or eBay and they sell just the wraps Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-16-2013, 10:57 AM	#53
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: Let's see your aftermarket or non stock steering wheel!! Im looking for the box now I think its from apc... I guesss I have something to do this am now.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-16-2013, 01:46 PM	#57
GTJ558 Registered User Join Date: Sep 2011 Location: Sayville, NY Posts: 31	Re: Let's see your aftermarket or non stock steering wheel!! Here's what i got Attached Images

02-16-2013, 04:57 PM	#60
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,676	Re: Let's see your aftermarket or non stock steering wheel!! Later Model Cavalier wheel. Attached Images __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

02-19-2013, 02:42 PM	#63
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,141	Re: Let's see your aftermarket or non stock steering wheel!! Here's the link http://www.brotherstrucks.com/products.asp?dept=1063 __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

02-19-2013, 02:46 PM	#64
register Registered User Join Date: Jan 2013 Location: Toronto Ontario Posts: 60	Re: Let's see your aftermarket or non stock steering wheel!! after all that they will not ship to Toronto Canada will have to go to Classic industries. Thanks again LeeH

02-19-2013, 03:08 PM	#65
67basketcase Registered User Join Date: Aug 2012 Location: Cassopolis, MI Posts: 96	Re: Let's see your aftermarket or non stock steering wheel!! Here's a unique one I ran across........... Attached Images

02-19-2013, 04:01 PM	#66
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Re: Let's see your aftermarket or non stock steering wheel!! I've used this wheel on all the highend trucks I've built over the year's with much liking by the new owner's,, Attached Images __________________ Things happen for a reason!

07-01-2016, 12:34 AM	#67
elpound Active Member Join Date: Dec 2009 Location: Killdeer ND Posts: 118	Re: Let's see your aftermarket or non stock steering wheel!! I got my door emblems and horn button back a while ago. Looks better than new. Sent them to the shop to have installed. I have the Chevy walnut grain wheel. Attached Images

09-27-2016, 09:11 PM	#68
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,107	Re: Let's see your aftermarket or non stock steering wheel!! Time for reboot of this thread. Here is mine a Le Carra double slot. Had it on my other truck form 2006 till I sold the truck in 2014. It now resides in my Highlander. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

09-28-2016, 12:42 AM	#69
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Let's see your aftermarket or non stock steering wheel!! Recently pulled the Grant I had and mounted one of the Forever Sharp jobs... Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

09-28-2016, 01:05 AM	#70
samkost Senior Member Join Date: Sep 2014 Location: Lake Tapps, Wa. Posts: 614	Re: Let's see your aftermarket or non stock steering wheel!! Purchased, not yet installed for my '72 C10 Attached Images

09-28-2016, 05:20 PM	#71
jescates Registered User Join Date: Aug 2001 Location: Mcloud, Oklahoma Posts: 656	Re: Let's see your aftermarket or non stock steering wheel!! Bought it with this one! Don't really care fit it much and when funds are there, will definitely be changing this one! Attached Images __________________ 1970 C-10 LWB 1998 Jeep Wrangled TJ 2009 Honda VTX 1300 2013 Buick Enclave

09-28-2016, 06:55 PM	#73
samkost Senior Member Join Date: Sep 2014 Location: Lake Tapps, Wa. Posts: 614	Re: Let's see your aftermarket or non stock steering wheel!! Yes it is a Chevelle,Camaro and Corvette style wheel. I haven't actually measure its diameter...I think 15"? Smaller than stock of course. I got a great deal on mine locally. Many vendors carry this style and I have seen them on Ebay also. Here is an informational link with all styles of wheels and and different horn caps. http://www.camaros.org/swheel.shtml Good luck.



Register or Log In To remove these advertisements.

09-28-2016, 09:30 PM	#74
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	Re: Let's see your aftermarket or non stock steering wheel!! All Billet...powdercoated..custom horn button.. Attached Images __________________ 71 LWB Large Bore 6-71 Blown 383 Stroker 4.11 Motive/EOM Eaton Posi Ported/Polished Carrier 15x8/15x16.5 MT Radials B&M Pro Shifter Truck Name- Spike

09-28-2016, 09:40 PM	#75
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,453	Re: Let's see your aftermarket or non stock steering wheel!! Another comfort grip wheel... Attached Images __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

Register or Log In To remove these advertisements.