KS parting a 67 chevy CST - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 11-23-2012, 01:45 AM

I will take the CST emblems if they get to me. Thank you.
Posted via Mobile Device

bpotter05 · 11-23-2012, 02:31 AM

Do you have a set of headlight bezels or is only 1 of them good?

*Puropedo* · 11-23-2012, 03:56 AM

puropedo, your 4th on trim. Upper chrome door panel pieces, some surface rust but not bad $12 plus shipping. 3rd on steering wheel. Horn button is sold. Not sure on beauty rings but looked good on truck with caps

I will take the upper chrome door panel pieces, how much for the beauty rings? Do you have any more 67-68 lower trim pieces? I just need the drivers door piece and drivers cab corner

A.Bursell · 11-23-2012, 05:49 AM

I'll take sunvisor clips if that deal falls through. Been looking for 67's for a while!

Adam

teeitup · 11-23-2012, 09:22 AM

floppydoodle, I will get pics of best mirror I have this afternoon and a quote

Madness, Brett, $86 shipped, I will pm you

tdj4bama, Truman, I will pm you info

shawno72, I will let you know

bpotter05, only one of them is decent and it has some dings

puropedo, I'll get quote on door panel chrome pieces. $25 plus shipping on the trim rings. Sorry no other 67-68 trim right now

A.Bursell, Adam, sorry no others right now

Thanks Randy

Vintage Windmills · 11-23-2012, 10:06 AM

Randy, are the front fenders available and what is the condition?

*Puropedo* · 11-23-2012, 12:47 PM

puropedo, I'll get quote on door panel chrome pieces. $25 plus shipping on the trim rings. Sorry no other 67-68 trim right now

I will take the rings as well, please get me a total shipped so I can send u the $... Do you happen to have a set of 67-71 metal door panels that are in good shape? Gold color preferably

**DeadheadNM** · 11-23-2012, 01:50 PM

Randy - If OK I'll send $$ for both the GM decal and manual throttle when the throttle is done. No rush. Thanks, Pete

teeitup · 11-23-2012, 08:14 PM

Vintage, Jud, theses are junk, I do have the red one out there though, I can't remember condition of it but can check it out Sat

Puropedo, I will get quote Sat, ran out of time today. I have a set of metal door panels with covers on them out there

Pete, he dropped off cable today, I will get pics of it all Sat

Thanks Randy

teeitup · 11-23-2012, 08:28 PM

floppydoodle, here is the best mirror I have, has a little fog on bottom but not bad. $23 shipped for it and arm

teeitup · 11-23-2012, 08:31 PM

orange 69, I have 2 sets both are original tinted, one set has extra tint on it that would need removed. Here is one set

teeitup · 11-23-2012, 08:34 PM

And this set, both have light pitting and one on each set has a seal issue

teeitup · 11-23-2012, 08:35 PM

pics for Blap

teeitup · 11-23-2012, 08:39 PM

DaHos, I wiped down hubcaps, gauge setup lens has a crack in it but I will change out a another lens for it. Also pic of ign setup with key and locks

teeitup · 11-23-2012, 08:42 PM

puropedo, I wiped down rings, good shine, they have a few dings in them

teeitup · 11-23-2012, 08:44 PM

more parts off it

teeitup · 11-23-2012, 08:47 PM

I just have to pull motor/tranny and take off tranny linkage and AT crossmember, and check rearend ratio, then its headed to scrap

RRC · 11-23-2012, 09:03 PM

Can you post a pic of the air cleaner?
Posted via Mobile Device

teeitup · 11-23-2012, 09:06 PM

In post #7, 2nd pic is one pic of it, I can get more Sat. Thanks Randy

teeitup · 11-23-2012, 10:00 PM

Guys who are waiting for quotes I will get them Sat for you. Thanks Randy

floppydoodle · 11-23-2012, 10:50 PM

Ok I will take them
Posted via Mobile Device

*Puropedo* · 11-23-2012, 11:38 PM

puropedo, I wiped down rings, good shine, they have a few dings in them
Rings look nice....Please take a few shots of door panels and price shipped to 93906.. Thx Juanito

j ripper · 11-23-2012, 11:59 PM

Hi randy, are the sun visors spoken for? Thank you, josh
Posted via Mobile Device

teeitup · 11-24-2012, 10:40 AM

floppydoodle, I'll pm you info

puropedo, Juanito, I'll get pics of them today

j ripper, Josh, the seems are not the best. I sold the clips but I have some other blue clips out there. $12 plus shipping for pair

Thanks Randy

67 chevy heaven · 11-24-2012, 11:08 AM

Hi I am needing a set of the long front bumper brackets. mine are bent.
I am looking for a set for my 67 (if there is any difference)

11-23-2012, 01:45 AM	#51
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: parting a 67 chevy CST I will take the CST emblems if they get to me. Thank you. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-23-2012, 02:31 AM	#52
bpotter05 Registered User Join Date: Nov 2012 Location: Wichita, KS Posts: 32	Re: parting a 67 chevy CST Do you have a set of headlight bezels or is only 1 of them good?

11-23-2012, 03:56 AM	#53
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: parting a 67 chevy CST puropedo, your 4th on trim. Upper chrome door panel pieces, some surface rust but not bad $12 plus shipping. 3rd on steering wheel. Horn button is sold. Not sure on beauty rings but looked good on truck with caps I will take the upper chrome door panel pieces, how much for the beauty rings? Do you have any more 67-68 lower trim pieces? I just need the drivers door piece and drivers cab corner

11-23-2012, 05:49 AM	#54
A.Bursell Registered User Join Date: Jul 2012 Location: Marysville, WA Posts: 298	Re: parting a 67 chevy CST I'll take sunvisor clips if that deal falls through. Been looking for 67's for a while! Adam

11-23-2012, 09:22 AM	#55
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST floppydoodle, I will get pics of best mirror I have this afternoon and a quote Madness, Brett, $86 shipped, I will pm you tdj4bama, Truman, I will pm you info shawno72, I will let you know bpotter05, only one of them is decent and it has some dings puropedo, I'll get quote on door panel chrome pieces. $25 plus shipping on the trim rings. Sorry no other 67-68 trim right now A.Bursell, Adam, sorry no others right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 10:06 AM	#56
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: parting a 67 chevy CST Randy, are the front fenders available and what is the condition? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-23-2012, 12:47 PM	#57
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: parting a 67 chevy CST puropedo, I'll get quote on door panel chrome pieces. $25 plus shipping on the trim rings. Sorry no other 67-68 trim right now I will take the rings as well, please get me a total shipped so I can send u the $... Do you happen to have a set of 67-71 metal door panels that are in good shape? Gold color preferably

11-23-2012, 01:50 PM	#58
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: parting a 67 chevy CST Randy - If OK I'll send $$ for both the GM decal and manual throttle when the throttle is done. No rush. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-23-2012, 08:14 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST Vintage, Jud, theses are junk, I do have the red one out there though, I can't remember condition of it but can check it out Sat Puropedo, I will get quote Sat, ran out of time today. I have a set of metal door panels with covers on them out there Pete, he dropped off cable today, I will get pics of it all Sat Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 08:28 PM	#60
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST floppydoodle, here is the best mirror I have, has a little fog on bottom but not bad. $23 shipped for it and arm Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 08:31 PM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST orange 69, I have 2 sets both are original tinted, one set has extra tint on it that would need removed. Here is one set Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 08:34 PM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST And this set, both have light pitting and one on each set has a seal issue Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 08:35 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST pics for Blap Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 08:39 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST DaHos, I wiped down hubcaps, gauge setup lens has a crack in it but I will change out a another lens for it. Also pic of ign setup with key and locks Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 08:42 PM	#65
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST puropedo, I wiped down rings, good shine, they have a few dings in them Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

11-23-2012, 08:44 PM	#66
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST more parts off it Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 08:47 PM	#67
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST I just have to pull motor/tranny and take off tranny linkage and AT crossmember, and check rearend ratio, then its headed to scrap Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 09:03 PM	#68
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: parting a 67 chevy CST Can you post a pic of the air cleaner? Posted via Mobile Device

11-23-2012, 09:06 PM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST In post #7, 2nd pic is one pic of it, I can get more Sat. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 10:00 PM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST Guys who are waiting for quotes I will get them Sat for you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2012, 10:50 PM	#71
floppydoodle Registered User Join Date: Feb 2010 Location: louisiana Posts: 130	Re: parting a 67 chevy CST Ok I will take them Posted via Mobile Device

11-23-2012, 11:38 PM	#72
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: parting a 67 chevy CST puropedo, I wiped down rings, good shine, they have a few dings in them Rings look nice....Please take a few shots of door panels and price shipped to 93906.. Thx Juanito

11-23-2012, 11:59 PM	#73
j ripper Registered User Join Date: Jul 2010 Location: napa ca. Posts: 199	Re: parting a 67 chevy CST Hi randy, are the sun visors spoken for? Thank you, josh Posted via Mobile Device __________________ edited by staff

11-24-2012, 10:40 AM	#74
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 67 chevy CST floppydoodle, I'll pm you info puropedo, Juanito, I'll get pics of them today j ripper, Josh, the seems are not the best. I sold the clips but I have some other blue clips out there. $12 plus shipping for pair Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-24-2012, 11:08 AM	#75
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: parting a 67 chevy CST Hi I am needing a set of the long front bumper brackets. mine are bent. I am looking for a set for my 67 (if there is any difference)

Register or Log In To remove these advertisements.