71lsx-LWB**Build Thread**

[Classic-Steele]

Really sweet truck ya have there! hows it been running lately? what was the part# on the clutch kit your running? hydro or mechanical throwout bearing? which shifter cleared your seat? I'm also putting a 4 speed (super t10)behind a lq4 in a c20 and its great to hear what worked for the rest of you.
Kale

[low&slow]

Man your build is just too cool. I'm tagging a long.

[Benlugchev]

Originally Posted by Classic-Steele

Really sweet truck ya have there! hows it been running lately? what was the part# on the clutch kit your running? hydro or mechanical throwout bearing? which shifter cleared your seat? I'm also putting a 4 speed (super t10)behind a lq4 in a c20 and its great to hear what worked for the rest of you.
Kale

Thanks for the positive vibes. Mechanical clutch . Not sure pn off the top of my head. She has been put away for the winter, cant wait for spring. Good luck on you build.

[Benlugchev]

Originally Posted by Classic-Steele

Really sweet truck ya have there! hows it been running lately? what was the part# on the clutch kit your running? hydro or mechanical throwout bearing? which shifter cleared your seat? I'm also putting a 4 speed (super t10)behind a lq4 in a c20 and its great to hear what worked for the rest of you.
Kale

Actually, depending on what your looking for, i might be interested in selling this flywheel/clutch/tranny combo. its rated for 1000hp. Im thinking of going auto with here, better for the track, but manual is a ton of fun on the street.

[Benlugchev]

GOPR1084 - YouTube

I pulled the old girl out of winter storage. She's ready for summer

[Benlugchev]

here is another little clip, ended up busting the stock 2pc. driveshaft.lol time to upgrade the last piece of the puzzle. it busted at the middle U joint

Any ideas about putting a 1pc driveshaft in long wheel base? or where can i get a strong 2pc ds

c10 truck - YouTube

[Benlugchev]

Finally put her on the rollers today. It was impressive and scary all at the same time.
I was very happy.

Put down 738 RWHP & 700Torque

[Classic-Steele]

Originally Posted by Benlugchev

Finally put her on the rollers today. It was impressive and scary all at the same time.
I was very happy.

Put down 738 RWHP & 700Torque

Impressive numbers! Was this running thru the M22?

[Benlugchev]

Video of the dyno

https://www.youtube.com/watch?v=eLz6...ature=youtu.be

[Benlugchev]

Yes that was with the Muncie M22. Was at boost at 10psi

[Classic-Steele]

Very healthy for sure! still running the vinci 218 cam? Planning on doing that 4l80 swap?

[Benlugchev]

Originally Posted by Classic-Steele

Very healthy for sure! still running the vinci 218 cam? Planning on doing that 4l80 swap?

Yep still running isky 218 cam

I should be picking the 80 up from my tranny guy this week. Time to order up a converter and head back to the dyno for back to back results manual/auto with same tune.

[timmytimm3]

Love the truck. I'm from CT too and building a 66 c10.

[Classic-Steele]

Originally Posted by Benlugchev

Yep still running isky 218 cam

I should be picking the 80 up from my tranny guy this week. Time to order up a converter and head back to the dyno for back to back results manual/auto with same tune.

Who are you going with for the converter? Circle D and Yank seem to be the go to guys for our kinda stuff, but I'll probably be giving rev max a try when that time comes. They seem to build a really nice (billet) converter that's reasonably priced as well...

[Benlugchev]

Originally Posted by Classic-Steele

Who are you going with for the converter? Circle D and Yank seem to be the go to guys for our kinda stuff, but I'll probably be giving rev max a try when that time comes. They seem to build a really nice (billet) converter that's reasonably priced as well...

I ordered a Hughes verter today. Single disk lockup 3000 stall. I had a bad experience with yank on my other truck.

[Benlugchev]

some street cruising
http://youtu.be/33tf5tV0M7Q

[timmytimm3]

Awesome vid. That truck must be a blast to drive!

[Benlugchev]

Track pass yesterday ran 4 low 11 sec passes @130mph back to back Best was 11.0@131. Drove the truck 1.5hr to get there. Had issues controlling boost so I ran the lightest wg spring I had (tial's 5lb spring). Boost was all over the place. Time for a second gate and more consistent boost.

Launched on foot brake 2800 rpm @2lbs

Turbo C10 track pass 11.0@131 - YouTube

[low69chevy]

That must be a fun truck to drive hope mine turns out similar to this and those dyno numbers man very impressive keep up the good work

[Benlugchev]

better video with a few clips from the track
http://youtu.be/9Kto_i38r8s

[Benlugchev]

c10 track - YouTube

[low69chevy]

I was seeing the vids of the white 2500 in the background what are the specs on that if you don't mind me asking I have a 03 4x4 lifted hd on 22x14s and 35s and It's slow I was planning on throwing a turbo on it something simple and reliable any tips and sootyfor the tread hi jack you can pm me if you like.

[Benlugchev]

Originally Posted by low69chevy

I was seeing the vids of the white 2500 in the background what are the specs on that if you don't mind me asking I have a 03 4x4 lifted hd on 22x14s and 35s and It's slow I was planning on throwing a turbo on it something simple and reliable any tips and sootyfor the tread hi jack you can pm me if you like.

My white GMC c2500...
It's turbo lq4. It went 11.67@116mph. On the Rollers it put out 500/560. I did s475 turbo t-4 housing. Spools fast and it a blast to drive. Put the transgo shift kit in the 80 and make sure you have the full float rear. I built custom "caltrac" type setup device to eliminate any wheel hop and gain some traction works awesome

Here is the build for more info http://www.performancetrucks.net/for...0-rclb-508917/

[Benlugchev]

new Video

http://youtu.be/Wsn0bjM2tdM
https://www.youtube.com/watch?v=Wsn0...ature=youtu.be

[Benlugchev]

new Video

http://youtu.be/Wsn0bjM2tdM