LVPhotos 1962 Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flips72 · 05-26-2013, 10:07 PM

I can smell the rubber burning now

sounds awesome

LVPhotos · 06-14-2013, 05:35 PM

Primed the front fenders.

LVPhotos · 08-21-2013, 07:38 PM

Working in the garage on the rear tubular trailing arm from Porterbuilt. Bags at 80psi full up.

LVPhotos · 08-21-2013, 07:43 PM

Out with the old boxed and powder coated originals in with Porterbuilt tubular extended 1/2" bars. This will center the axle in the wheel house. Yes there is daylight in one shot but the bolts were hand tight.

LVPhotos · 08-21-2013, 07:46 PM

Still on jack but tucked all the way. No bump stops or pipe notch. Yet.

verdell · 08-19-2015, 08:15 AM

Quote:

Originally Posted by LVPhotos

Still on jack but tucked all the way. No bump stops or pipe notch. Yet.

Hey, do the 295's fit without rubbing the rear wheel tubs on the inside? I'm looking at the same size for the rear but was wondering if I would have to modify by stock wheel tubs. I have a 1965 12 bolt rear. Also, your project looks great..

ebaby35 · 05-10-2016, 02:57 PM

How do the new PB trailing arms attach to old crossmember do you have a pic?

LVPhotos · 05-10-2016, 04:46 PM

Quote:

Originally Posted by ebaby35

How do the new PB trailing arms attach to old crossmember do you have a pic?

I don't have a good picture. It bolts in like stock. The rod ends have a "cone" spacer on ech side to center it.

LVPhotos · 08-23-2013, 04:55 PM

Cut the pan-hard bar mount off. Reposition the rear. Did valve cover swap, with hint of the body color. Full down on frame and fender, time for a nip/tuck and pipe notch. Swapped in the MSD Distributor and coil, no more HEI.

Nacho_Paras N.L. · 04-21-2015, 12:49 PM

Quote:

Originally Posted by LVPhotos

Cut the pan-hard bar mount off. Reposition the rear. Did valve cover swap, with hint of the body color. Full down on frame and fender, time for a nip/tuck and pipe notch. Swapped in the MSD Distributor and coil, no more HEI.

Nice build..... What headers do you have?

LVPhotos · 09-05-2013, 07:37 PM

Workin!

LVPhotos · 10-25-2013, 12:12 PM

Some updates. Dragged a 4 door dualy to buddy's house. Applied GM engine decals. The 400 is early Caprice which is right size and car wrong year. The 400hp is for the 409. Test fitting Porterbuilt bar and frame mount. Now the axle sits 1/2" back the new mount is relocated rear of crossmember about where the 63-72 is.

LVPhotos · 12-11-2013, 06:13 PM

Found this initial measurement of rear ride height with 275-60-15s minus bed weight.

LVPhotos · 05-20-2013, 07:12 PM

1962 Chevy c-10 406cui small block sound byte -...

Jmorales3181 · 05-20-2013, 07:59 PM

Sounds good!

Posted via Mobile Device

markeb01 · 05-20-2013, 11:06 PM

Very cool! Thanks for sharing.

dr69burb · 08-22-2013, 02:19 PM

nice man looks good

LVPhotos · 08-25-2013, 08:22 PM

Post on trailing arms not working. What's a good price range for the ones I pulled off?
Posted via Mobile Device

jchav62 · 10-25-2013, 12:36 PM

I like! Very cool project...

**TJ's Chevy** · 10-25-2013, 03:36 PM

Looking sharp!!! Awesome!!!

LVPhotos · 12-19-2013, 01:28 PM

since cardomain is now jacked here are exhaust pics

http://carphotos.cardomain.com/ride_...iginal.jpg?v=0

LVPhotos · 12-19-2013, 01:29 PM

**TJ's Chevy** · 12-19-2013, 09:31 PM

Sure as heck is alot cleaner under there then my truck is! LOL!

LVPhotos · 12-19-2013, 11:27 PM

Quote:

Originally Posted by T.J. MCCAULEY

Sure as heck is alot cleaner under there then my truck is! LOL!

Built in L.A. and has been in Nevada most of its life. Few months in AZ when I was in college.

NEWFISHER · 12-19-2013, 10:36 PM

Cool build. Do the PB rear arms drop it any over using stock or just move the axle location?

05-26-2013, 10:07 PM	#1
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: LVPhotos 1962 Build I can smell the rubber burning now sounds awesome __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

06-14-2013, 05:35 PM	#2
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Primed the front fenders. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

08-21-2013, 07:38 PM	#3
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Working in the garage on the rear tubular trailing arm from Porterbuilt. Bags at 80psi full up. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

08-21-2013, 07:43 PM	#4
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Out with the old boxed and powder coated originals in with Porterbuilt tubular extended 1/2" bars. This will center the axle in the wheel house. Yes there is daylight in one shot but the bolts were hand tight. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

08-21-2013, 07:46 PM	#5
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Still on jack but tucked all the way. No bump stops or pipe notch. Yet. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

05-10-2016, 02:57 PM	#7
ebaby35 Registered User Join Date: Jan 2016 Location: fountain valley california Posts: 135	Re: LVPhotos 1962 Build How do the new PB trailing arms attach to old crossmember do you have a pic?

08-23-2013, 04:55 PM	#9
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Cut the pan-hard bar mount off. Reposition the rear. Did valve cover swap, with hint of the body color. Full down on frame and fender, time for a nip/tuck and pipe notch. Swapped in the MSD Distributor and coil, no more HEI. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 Last edited by LVPhotos; 08-23-2013 at 05:18 PM.

09-05-2013, 07:37 PM	#11
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Workin! Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

10-25-2013, 12:12 PM	#12
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Some updates. Dragged a 4 door dualy to buddy's house. Applied GM engine decals. The 400 is early Caprice which is right size and car wrong year. The 400hp is for the 409. Test fitting Porterbuilt bar and frame mount. Now the axle sits 1/2" back the new mount is relocated rear of crossmember about where the 63-72 is. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

12-11-2013, 06:13 PM	#13
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Found this initial measurement of rear ride height with 275-60-15s minus bed weight. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

05-20-2013, 07:59 PM	#15
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: LVPhotos 1962 Build Sounds good! Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

05-20-2013, 11:06 PM	#16
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: LVPhotos 1962 Build Very cool! Thanks for sharing. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

08-22-2013, 02:19 PM	#17
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: LVPhotos 1962 Build nice man looks good __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

08-25-2013, 08:22 PM	#18
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build Post on trailing arms not working. What's a good price range for the ones I pulled off? Posted via Mobile Device __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

10-25-2013, 12:36 PM	#19
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: LVPhotos 1962 Build I like! Very cool project... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4



Register or Log In To remove these advertisements.

10-25-2013, 03:36 PM	#20
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: LVPhotos 1962 Build Looking sharp!!! Awesome!!! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-19-2013, 01:28 PM	#21
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build since cardomain is now jacked here are exhaust pics http://carphotos.cardomain.com/ride_...iginal.jpg?v=0 __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

12-19-2013, 01:29 PM	#22
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: LVPhotos 1962 Build __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

12-19-2013, 09:31 PM	#23
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: LVPhotos 1962 Build Sure as heck is alot cleaner under there then my truck is! LOL! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-19-2013, 10:36 PM	#25
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: LVPhotos 1962 Build Cool build. Do the PB rear arms drop it any over using stock or just move the axle location? __________________ GOD BLESS AMERICA!

Register or Log In To remove these advertisements.