KS 68 lwb chevy getting parted now - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-22-2013, 09:41 AM

Truman, $45 shipped for them. Thanks Randy

ZOOMY · 01-22-2013, 11:40 AM

Randy, Do you have any good non a/c cabs for sale ? Rusted out rockers are OK............Zoomy form Wi.

teeitup · 01-22-2013, 01:24 PM

Zoomy, sorry I have 2 trucks here but both are rusted out badly. I'm trying to buy another one but unsure condition of it yet. Thanks Randy

teeitup · 01-22-2013, 02:05 PM

pics for Paul

kcsa75 · 01-22-2013, 03:59 PM

Randy,

Do you have any inner fenders in good shape. I need a matching set.

**lawest** · 01-22-2013, 05:34 PM

Randy, I would be interested in the entire dash/gage assy as well as the inner and outer a/c set up. If you don't have all the pieces just quote me on what you have. I am in OK and can pick up. Thanks, Larry

teeitup · 01-22-2013, 07:24 PM

Willie, sorry no good ones right now

Larry, which gauge setup you talking about for sure, these last pics of the speed warning are in another truck and the speed warning setup has been sold already. I'll have to look through and see what all I have as far AC stuff, I should have most everything though

Thanks Randy

tdj4bama · 01-22-2013, 10:03 PM

Randy did the screw holes mess up any when you took the door panels off? I know often times they have to be drilled out and get a little boogered up.
Thanks, Truman

teeitup · 01-22-2013, 11:45 PM

Truman, I did have to drill some of the screws out, I will check and see after work tomorrow. Thanks Randy

kcsa75 · 01-23-2013, 12:06 AM

Quote:

Originally Posted by teeitup

Willie, sorry no good ones right now

Larry, which gauge setup you talking about for sure, these last pics of the speed warning are in another truck and the speed warning setup has been sold already. I'll have to look through and see what all I have as far AC stuff, I should have most everything though

Thanks Randy

No worries. Keep me in mind if you come across any.

Thanks.

**Racer2172** · 01-23-2013, 12:15 AM

How much for fender badges shipped to 89406? Also looking for a gauge panel
Posted via Mobile Device

teeitup · 01-23-2013, 12:18 AM

Sure will Willie

Racer2172, badges are not in the best shape, I have one other member asking about gauge setup, I will give him till tomorrow night to let me know, then I will let you know

Thanks Randy

teeitup · 01-23-2013, 07:23 PM

Truman, a couple holes have issues, and I did see one small dent in one of them, its on the flat area, easy fix

teeitup · 01-23-2013, 07:24 PM

pics for Paul, back looks great
the red wire has been spiced
the bezel has some cracks by screw holes, I think a new bezel would be best

teeitup · 01-23-2013, 07:25 PM

brown tach wire has some wear spots in pic 2
green wire has been spliced in pic 3 and 4
buzzer does not have the mount on it, it was zip tied

teeitup · 01-23-2013, 07:41 PM

lawest, Larry, I just hauled in a 69 with AC, between what it has and what parts I have around here I should have everything. The divertor box would be about it, they are usually broke. $275 for all AC stuff, not including dash. As far as the dash it has been sold but I may have another truck bought that has AC in it too. Thanks Randy

tdj4bama · 01-23-2013, 07:58 PM

Randy those door panels look almost identical to the ones I have now. I'll pass on them but thanks for your trouble. Truman
Posted via Mobile Device

**lawest** · 01-23-2013, 09:08 PM

Quote:

Originally Posted by teeitup

Willie, sorry no good ones right now

Larry, which gauge setup you talking about for sure, these last pics of the speed warning are in another truck and the speed warning setup has been sold already. I'll have to look through and see what all I have as far AC stuff, I should have most everything though

Thanks Randy

Sorry, I thought the stuff in the pics was from this truck. I sent you a PM with what I am looking for. Thanks, Larry

**lawest** · 01-23-2013, 09:12 PM

Quote:

Originally Posted by teeitup

lawest, Larry, I just hauled in a 69 with AC, between what it has and what parts I have around here I should have everything. The divertor box would be about it, they are usually broke. $275 for all AC stuff, not including dash. As far as the dash it has been sold but I may have another truck bought that has AC in it too. Thanks Randy

Put me down for the a/c stuff that you have and let me know about the other truck when you get it in. I can send you the money order or bring cash when I pick it up. Also sent a pm with other stuff I am looking for. Larry

teeitup · 01-24-2013, 09:10 PM

Truman, no problem

Larry, I'll hopefully start parting this truck this weekend and after work next week

Thanks Randy

teeitup · 01-25-2013, 10:08 PM

emblems pics

teeitup · 01-25-2013, 10:09 PM

gauge pics

sstaten69 · 01-26-2013, 11:16 PM

would you have any pics of it? thanks Steve

teeitup · 01-26-2013, 11:43 PM

Steve, I actually have 2 of them, I'll get pics in morning, Thanks Randy

teeitup · 01-27-2013, 09:15 PM

Steve, I have 68-70, the green one and a 71-72 blue one

01-22-2013, 09:41 AM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Truman, $45 shipped for them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2013, 11:40 AM	#52
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: 68 lwb chevy getting parted now Randy, Do you have any good non a/c cabs for sale ? Rusted out rockers are OK............Zoomy form Wi.

01-22-2013, 01:24 PM	#53
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Zoomy, sorry I have 2 trucks here but both are rusted out badly. I'm trying to buy another one but unsure condition of it yet. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2013, 02:05 PM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now pics for Paul Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2013, 03:59 PM	#55
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: 68 lwb chevy getting parted now Randy, Do you have any inner fenders in good shape. I need a matching set. __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

01-22-2013, 05:34 PM	#56
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: 68 lwb chevy getting parted now Randy, I would be interested in the entire dash/gage assy as well as the inner and outer a/c set up. If you don't have all the pieces just quote me on what you have. I am in OK and can pick up. Thanks, Larry __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

01-22-2013, 07:24 PM	#57
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Willie, sorry no good ones right now Larry, which gauge setup you talking about for sure, these last pics of the speed warning are in another truck and the speed warning setup has been sold already. I'll have to look through and see what all I have as far AC stuff, I should have most everything though Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2013, 10:03 PM	#58
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: 68 lwb chevy getting parted now Randy did the screw holes mess up any when you took the door panels off? I know often times they have to be drilled out and get a little boogered up. Thanks, Truman

01-22-2013, 11:45 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Truman, I did have to drill some of the screws out, I will check and see after work tomorrow. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2013, 12:15 AM	#61
Racer2172 Senior Member Join Date: Nov 2011 Location: Yuma, AZ Posts: 319	Re: 68 lwb chevy getting parted now How much for fender badges shipped to 89406? Also looking for a gauge panel Posted via Mobile Device __________________ 65 C-10 Times gone by(Sons truck)http://67-72chevytrucks.com/vboard/s...92#post6164692 70 C-30 Tow truck AKA Highlighter 02 Silverado 2500 HD CUCVII Tow Rig/DD 1968 C10 Project Quarantine http://67-72chevytrucks.com/vboard/s...d.php?t=804800 1980 Buick Regal Dirt Stock car

01-23-2013, 12:18 AM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Sure will Willie Racer2172, badges are not in the best shape, I have one other member asking about gauge setup, I will give him till tomorrow night to let me know, then I will let you know Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2013, 07:23 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Truman, a couple holes have issues, and I did see one small dent in one of them, its on the flat area, easy fix Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2013, 07:24 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now pics for Paul, back looks great the red wire has been spiced the bezel has some cracks by screw holes, I think a new bezel would be best Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2013, 07:25 PM	#65
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now brown tach wire has some wear spots in pic 2 green wire has been spliced in pic 3 and 4 buzzer does not have the mount on it, it was zip tied Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2013, 07:41 PM	#66
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now lawest, Larry, I just hauled in a 69 with AC, between what it has and what parts I have around here I should have everything. The divertor box would be about it, they are usually broke. $275 for all AC stuff, not including dash. As far as the dash it has been sold but I may have another truck bought that has AC in it too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

01-23-2013, 07:58 PM	#67
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: 68 lwb chevy getting parted now Randy those door panels look almost identical to the ones I have now. I'll pass on them but thanks for your trouble. Truman Posted via Mobile Device

01-24-2013, 09:10 PM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Truman, no problem Larry, I'll hopefully start parting this truck this weekend and after work next week Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-25-2013, 10:08 PM	#71
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now emblems pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-25-2013, 10:09 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now gauge pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-26-2013, 11:16 PM	#73
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: 68 lwb chevy getting parted now would you have any pics of it? thanks Steve

01-26-2013, 11:43 PM	#74
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Steve, I actually have 2 of them, I'll get pics in morning, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-27-2013, 09:15 PM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 lwb chevy getting parted now Steve, I have 68-70, the green one and a 71-72 blue one Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.