GA 1972 one ton for parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CCCC · 01-23-2013, 09:31 AM

Am interested in a package purchase: the cab lights/wiring; clutch & brake pedals; clutch rods, z-bar, frame bracket; and also the core brake booster w/brackets as long as it includes the MC and a good prop valve.

As possible, please PM me with total price including shipping to 87829.
Thanks.

**southern parts** · 01-23-2013, 09:49 PM

alarmed- pm sent

blkcorvair- i can throw in the bracket to hold the lines to the frame but the pump and lines are allready gone.

the gear ratio on the rear is 4.56 open. i pulled one of the drums, it still has plenty of meat on it, no grooves

cccc- the cab lights are sold, i can get you a total including shipping on the rest, but i cant guaranty the prop. valve to be good. lmk

Hard_Rain420 · 01-23-2013, 10:06 PM

I have no engine or trans. I'm starting with finding a drive shaft first, I would prefer to install a turbo 400 mated to a 350 eng. if that helps.

**Joesjunk** · 01-23-2013, 10:36 PM

I am interested in the glove box door, shipping to 64050. Thanks

UP GRADE · 01-23-2013, 11:16 PM

Is the sway bar still for sale?
Posted via Mobile Device

nobolt · 01-23-2013, 11:42 PM

i think i will pass on the 3rd member. i found a 4.10. what are you asking on the drums?

blkcorvair · 01-24-2013, 12:36 AM

The bracket, and box with pitman arm would be great. Can you get me a price shipped to 11786? Thanks

tdkosta · 01-24-2013, 10:35 AM

What price can you do on the AC harness? Oh I found the total price in the PM $56.00 sent.
Posted via Mobile Device

ChevyCruizer · 01-24-2013, 12:01 PM

Ill take the radio delete, if it is still available. I cant read through 3 pages to find out if it is still available.

Thanks,

John

**southern parts** · 01-24-2013, 10:15 PM

joesjunk- Joe, i`ll try to get a total for you tomorrow.

up grade- this one is sold, but i have another for the same money.

nobolt- $40 ea plus shipping on the drums. i wont be able to take it back apart to figure shipping until i pull the truck back on the trailer.

blkcorvair - i`ll try to get a total for you tomorrow.

tdkosta-payment received, will ship yours tomorrow

chevycruizer- red delete is sold

hard_rain420 & cccci`ll try to have some more info for yuo tomorrow

special-k- Tim, your up on the 4.56 i have another one ton that was an automatic. it might have a better gear in it. wont be able to check until sat.

**Joesjunk** · 01-25-2013, 10:24 AM

No rush, or how about $30 shipped?
Posted via Mobile Device

sstaten69 · 01-26-2013, 11:12 PM

what you think on the shipping to 63648. for the b\parking brake pedal and cable. any pic of it?? thanks again Steve

jrstallion51 · 01-27-2013, 09:48 PM

I'm looking for the screws (with ferrules) that go right below the vent windows on the inside of the doors. Should be one on each door...do you have them, and how much? Thanks!

stfinney · 02-02-2013, 07:28 PM

What parts do you have left?

david wiebelt · 02-02-2013, 10:50 PM

If you are willing to cut the cab for parts, I need where the cab lights mount on the roof. From the winsheild back about a foot.

**southern parts** · 02-03-2013, 01:27 AM

sorry for the slow response, i`ve been at the swap meet in moultrie for the past few days.

joesjunk- gbd shipped on wednesday

sstaten69- pm sent- and received

jrstallion51- sorry ,no help .the doors were about gutted when i got it

stfinney- what do you need?

david wiebelt- this truck is gone ,but i have another one ton with cab lights. soon to be parted

david wiebelt · 02-03-2013, 11:02 PM

Thanks. I need the whole roof and windsheild post also. it does have the raised cab lights? Please pm me and let me know when ready.
Thanks

stfinney · 02-03-2013, 11:12 PM

Really needing a driver's side fender if available.

BigRed76 · 02-03-2013, 11:27 PM

I got the air box a few days ago. Thanks.
Posted via Mobile Device

jobsforu · 02-11-2013, 08:01 PM

How much for the heater controls/Bezel? Have a rear chrome bumper? Do you know if driver door will fit 71 C10? What shape is it in?

**southern parts** · 02-12-2013, 04:01 AM

this truck is long gone, i have some pieces left but no sheetmetal.

jobsforu- $60 plus shipping on the a/c controls and bezel. no luck on the door and bumper

Scott>72-GMC · 02-12-2013, 06:00 AM

What shape are the mirrors in?
Posted via Mobile Device

bcrouch · 02-28-2013, 10:53 PM

I am in need of a 410 rear stump for 69 c30

Eddie Wickward · 03-01-2013, 01:13 AM

How much for the AC evaporator/heater motor box in the engine compartment?

**southern parts** · 03-01-2013, 05:47 PM

bcrouch- sorry no help on the 410 stump?

eddie wickward- the a/c housing did have some rust on it. bare housing $25 plus shipping. i can get pics of the rusted area if your interested.

01-23-2013, 09:31 AM	#51
CCCC Registered User Join Date: Mar 2007 Location: San Pedro River, SE Arizona Posts: 734	Re: 1972 one ton for parts Am interested in a package purchase: the cab lights/wiring; clutch & brake pedals; clutch rods, z-bar, frame bracket; and also the core brake booster w/brackets as long as it includes the MC and a good prop valve. As possible, please PM me with total price including shipping to 87829. Thanks. __________________ CCCC 67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison Moved but still in the family 70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350 Recently sent to new homes 72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp

01-23-2013, 09:49 PM	#52
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 1972 one ton for parts alarmed- pm sent blkcorvair- i can throw in the bracket to hold the lines to the frame but the pump and lines are allready gone. the gear ratio on the rear is 4.56 open. i pulled one of the drums, it still has plenty of meat on it, no grooves cccc- the cab lights are sold, i can get you a total including shipping on the rest, but i cant guaranty the prop. valve to be good. lmk Attached Images

01-23-2013, 10:06 PM	#53
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 1972 one ton for parts I have no engine or trans. I'm starting with finding a drive shaft first, I would prefer to install a turbo 400 mated to a 350 eng. if that helps.

01-23-2013, 10:36 PM	#54
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: 1972 one ton for parts I am interested in the glove box door, shipping to 64050. Thanks __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-23-2013, 11:16 PM	#55
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: 1972 one ton for parts Is the sway bar still for sale? Posted via Mobile Device

01-23-2013, 11:42 PM	#56
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 1972 one ton for parts i think i will pass on the 3rd member. i found a 4.10. what are you asking on the drums? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

01-24-2013, 12:36 AM	#57
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: 1972 one ton for parts The bracket, and box with pitman arm would be great. Can you get me a price shipped to 11786? Thanks

01-24-2013, 10:35 AM	#58
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: 1972 one ton for parts What price can you do on the AC harness? Oh I found the total price in the PM $56.00 sent. Posted via Mobile Device Last edited by tdkosta; 01-24-2013 at 12:28 PM.

01-24-2013, 12:01 PM	#59
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: 1972 one ton for parts Ill take the radio delete, if it is still available. I cant read through 3 pages to find out if it is still available. Thanks, John __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

01-24-2013, 10:15 PM	#60
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 1972 one ton for parts joesjunk- Joe, i`ll try to get a total for you tomorrow. up grade- this one is sold, but i have another for the same money. nobolt- $40 ea plus shipping on the drums. i wont be able to take it back apart to figure shipping until i pull the truck back on the trailer. blkcorvair - i`ll try to get a total for you tomorrow. tdkosta-payment received, will ship yours tomorrow chevycruizer- red delete is sold hard_rain420 & cccci`ll try to have some more info for yuo tomorrow special-k- Tim, your up on the 4.56 i have another one ton that was an automatic. it might have a better gear in it. wont be able to check until sat.

01-25-2013, 10:24 AM	#61
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: 1972 one ton for parts No rush, or how about $30 shipped? Posted via Mobile Device __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-26-2013, 11:12 PM	#62
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: 1972 one ton for parts what you think on the shipping to 63648. for the b\parking brake pedal and cable. any pic of it?? thanks again Steve

01-27-2013, 09:48 PM	#63
jrstallion51 Registered User Join Date: Nov 2010 Location: Ft Richardson, AK Posts: 94	Re: 1972 one ton for parts I'm looking for the screws (with ferrules) that go right below the vent windows on the inside of the doors. Should be one on each door...do you have them, and how much? Thanks!

02-02-2013, 07:28 PM	#64
stfinney Registered User Join Date: Apr 2011 Location: Vero Beach, FL Posts: 173	Re: 1972 one ton for parts What parts do you have left? __________________ Shawn 1972 C10 Custom LWB, 3-speed automatic, 350 bored .060 over, Vortec heads, Crane Energizer 260 H10 Cam My Beater/Work in Progress http://67-72chevytrucks.com/vboard/s...d.php?t=502044

02-02-2013, 10:50 PM	#65
david wiebelt Registered User Join Date: Jan 2009 Location: florida Posts: 172	Re: 1972 one ton for parts If you are willing to cut the cab for parts, I need where the cab lights mount on the roof. From the winsheild back about a foot.



Register or Log In To remove these advertisements.

02-03-2013, 01:27 AM	#66
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 1972 one ton for parts sorry for the slow response, i`ve been at the swap meet in moultrie for the past few days. joesjunk- gbd shipped on wednesday sstaten69- pm sent- and received jrstallion51- sorry ,no help .the doors were about gutted when i got it stfinney- what do you need? david wiebelt- this truck is gone ,but i have another one ton with cab lights. soon to be parted

02-03-2013, 11:02 PM	#67
david wiebelt Registered User Join Date: Jan 2009 Location: florida Posts: 172	Re: 1972 one ton for parts Thanks. I need the whole roof and windsheild post also. it does have the raised cab lights? Please pm me and let me know when ready. Thanks

02-03-2013, 11:12 PM	#68
stfinney Registered User Join Date: Apr 2011 Location: Vero Beach, FL Posts: 173	Re: 1972 one ton for parts Really needing a driver's side fender if available. __________________ Shawn 1972 C10 Custom LWB, 3-speed automatic, 350 bored .060 over, Vortec heads, Crane Energizer 260 H10 Cam My Beater/Work in Progress http://67-72chevytrucks.com/vboard/s...d.php?t=502044

02-03-2013, 11:27 PM	#69
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 1972 one ton for parts I got the air box a few days ago. Thanks. Posted via Mobile Device __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

02-11-2013, 08:01 PM	#70
jobsforu Registered User Join Date: Feb 2013 Location: Mauldin, SC Posts: 42	Re: 1972 one ton for parts How much for the heater controls/Bezel? Have a rear chrome bumper? Do you know if driver door will fit 71 C10? What shape is it in?

02-12-2013, 04:01 AM	#71
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 1972 one ton for parts this truck is long gone, i have some pieces left but no sheetmetal. jobsforu- $60 plus shipping on the a/c controls and bezel. no luck on the door and bumper

02-12-2013, 06:00 AM	#72
Scott>72-GMC Registered User Join Date: Jan 2013 Location: New providence ia Posts: 1,018	Re: 1972 one ton for parts What shape are the mirrors in? Posted via Mobile Device __________________ 72 GMC super custom.

02-28-2013, 10:53 PM	#73
bcrouch Registered User Join Date: Feb 2013 Location: wartburg tennessee Posts: 17	Re: 1972 one ton for parts I am in need of a 410 rear stump for 69 c30

03-01-2013, 01:13 AM	#74
Eddie Wickward Registered User Join Date: Feb 2013 Location: Spokane Washington Posts: 6	Re: 1972 one ton for parts How much for the AC evaporator/heater motor box in the engine compartment?

03-01-2013, 05:47 PM	#75
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 1972 one ton for parts bcrouch- sorry no help on the 410 stump? eddie wickward- the a/c housing did have some rust on it. bare housing $25 plus shipping. i can get pics of the rusted area if your interested.

Register or Log In To remove these advertisements.