FL Factory big block parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 01-22-2013, 03:11 PM

Quote:

Originally Posted by brian1971

Is that for both sides if so pm Paypal info
Thanks Brian
Posted via Mobile Device

just one

brian1971 · 01-22-2013, 03:14 PM

Sorry the one I really need is the driver side,I'll pass thanks
Posted via Mobile Device

**70STOVEBOLT** · 01-22-2013, 05:22 PM

Rob, yes I am talking about the clips at the bottom of the shroud. Sorry, I don't have a pic. I am going to pass on the engine stands, but I do want the shroud and heat shield, and I will make you an offer on the front coil springs as soon as I can find a value on them.

Thanks,
Mark

**Hart_Rod** · 01-22-2013, 06:16 PM

Quote:

Originally Posted by 70STOVEBOLT

Rob, yes I am talking about the clips at the bottom of the shroud. Sorry, I don't have a pic. I am going to pass on the engine stands, but I do want the shroud and heat shield, and I will make you an offer on the front coil springs as soon as I can find a value on them.

Thanks,
Mark

PM sent.

**Hart_Rod** · 01-24-2013, 10:06 AM

Quote:

Originally Posted by bcnya2

Hello...are the stands '72?..would you separate the stands and the mounts? If so, how much? If you cant, I understand. Thanks, Greg
Posted via Mobile Device

BCNYA2 - you are up for the motor stands.

Quote:

Originally Posted by 70STOVEBOLT

Rob, yes I am talking about the clips at the bottom of the shroud. Sorry, I don't have a pic. I am going to pass on the engine stands, but I do want the shroud and heat shield, and I will make you an offer on the front coil springs as soon as I can find a value on them.

Thanks,
Mark

Mark - are you still wanting these parts? I've been holding them for you, let me know what you want to do....

**70STOVEBOLT** · 01-24-2013, 10:26 AM

Rob, I do want the shroud w/clips and the heat shield but I am going to pass on the engine stands. If you can throw the springs in for $50 I will take them as well. That would make the total $185.00. I apologize, I thought I sent you a pm. If this sounds
good to you, pm your address and I will get you a postal money order on the way.

Thanks again,
Mark

**Hart_Rod** · 01-24-2013, 10:35 AM

Quote:

Originally Posted by 70STOVEBOLT

Rob, I do want the shroud w/clips and the heat shield but I am going to pass on the engine stands. If you can throw the springs in for $50 I will take them as well. That would make the total $185.00. I apologize, I thought I sent you a pm. If this sounds
good to you, pm your address and I will get you a postal money order on the way.

Thanks again,
Mark

Mark - I will go $200 for all that, shipping on the springs and shroud is going to be expensive. PM sent with mailing address.

R/

**70STOVEBOLT** · 01-24-2013, 12:08 PM

Rob, I am going to pass on the springs, I will send you a postal m.o. for $135.00 for the shroud w/clips and the heat shield. I received your pm and I sent you a reply as well.

Thanks,
Mark

**RenoKeene** · 01-24-2013, 12:31 PM

PM headed your way.

**Hart_Rod** · 01-26-2013, 09:36 AM

Quote:

Originally Posted by RenoKeene

PM headed your way.

Parts should be shipping today!
Posted via Mobile Device

nobolt · 01-26-2013, 12:36 PM

if you are scrapping the bed i would be interested in the rear tail light posts on each side of the tailgate with the trunions for wall art. lets say from the rear marker lights back. depending on price of course. i have a nice Cheyenne gate but it needs these along with it.
thanks

**Hart_Rod** · 01-28-2013, 09:13 AM

Quote:

Originally Posted by nobolt

if you are scrapping the bed i would be interested in the rear tail light posts on each side of the tailgate with the trunions for wall art. lets say from the rear marker lights back. depending on price of course. i have a nice Cheyenne gate but it needs these along with it.
thanks

How about a $100 + shipping? It will probably be a while before I cut it up.

**Hart_Rod** · 01-31-2013, 11:50 AM

Still have the BB motor mounts and the BB powersteering setup left.....

Hard_Rain420 · 02-01-2013, 12:41 AM

How much for the bed and tailgate? I just need it as a trailer.

**Hart_Rod** · 02-01-2013, 07:50 AM

Quote:

Originally Posted by Hard_Rain420

How much for the bed and tailgate? I just need it as a trailer.

Do you need the frame too?
Posted via Mobile Device

Hard_Rain420 · 02-01-2013, 11:34 AM

No, I have a frame with a junk bed on it.

**Hart_Rod** · 02-01-2013, 11:38 AM

Quote:

Originally Posted by Hard_Rain420

No, I have a frame with a junk bed on it.

I would take $350 for the complete bed. The floor and inner wheel tubs are real nice.

Hard_Rain420 · 02-01-2013, 12:56 PM

pm sent...

bronze 72 super · 02-02-2013, 02:10 AM

Did anyone buy the in-bed spare tire mount? If not I'll take it. Thanks Mike.

**Hart_Rod** · 02-02-2013, 11:24 AM

Quote:

Originally Posted by Hard_Rain420

pm sent...

You need to clean out your PM mailbox.

Quote:

Originally Posted by bronze 72 super

Did anyone buy the in-bed spare tire mount? If not I'll take it. Thanks Mike.

I still have it. $65 shipped.
Posted via Mobile Device

bronze 72 super · 02-02-2013, 12:08 PM

Sounds good, please send me payment information. Pay pal or money order? Thanks Mike.

**Hart_Rod** · 02-02-2013, 12:12 PM

Quote:

Originally Posted by bronze 72 super

Sounds good, please send me payment information. Pay pal or money order? Thanks Mike.

PM sent.

**Hart_Rod** · 02-04-2013, 11:10 AM

Quote:

Originally Posted by Hard_Rain420

pm sent...

You need to clean your PM box out again....

Travisc454 · 02-04-2013, 12:59 PM

I need the upper bed moldings if available?

**Hart_Rod** · 02-04-2013, 02:07 PM

Quote:

Originally Posted by Travisc454

I need the upper bed moldings if available?

I'm pretty sure Hard_Rain420 is taking the entire bed. I'm just waiting on confirmation from him.

01-22-2013, 03:14 PM	#52
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: Factory big block parts Sorry the one I really need is the driver side,I'll pass thanks Posted via Mobile Device __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

01-22-2013, 05:22 PM	#53
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: Factory big block parts Rob, yes I am talking about the clips at the bottom of the shroud. Sorry, I don't have a pic. I am going to pass on the engine stands, but I do want the shroud and heat shield, and I will make you an offer on the front coil springs as soon as I can find a value on them. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-24-2013, 10:26 AM	#56
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: Factory big block parts Rob, I do want the shroud w/clips and the heat shield but I am going to pass on the engine stands. If you can throw the springs in for $50 I will take them as well. That would make the total $185.00. I apologize, I thought I sent you a pm. If this sounds good to you, pm your address and I will get you a postal money order on the way. Thanks again, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-24-2013, 12:08 PM	#58
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: Factory big block parts Rob, I am going to pass on the springs, I will send you a postal m.o. for $135.00 for the shroud w/clips and the heat shield. I received your pm and I sent you a reply as well. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-24-2013, 12:31 PM	#59
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,043	Re: Factory big block parts PM headed your way. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

01-26-2013, 12:36 PM	#61
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Factory big block parts if you are scrapping the bed i would be interested in the rear tail light posts on each side of the tailgate with the trunions for wall art. lets say from the rear marker lights back. depending on price of course. i have a nice Cheyenne gate but it needs these along with it. thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

01-31-2013, 11:50 AM	#63
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,865	Re: Factory big block parts Still have the BB motor mounts and the BB powersteering setup left..... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-01-2013, 12:41 AM	#64
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Factory big block parts How much for the bed and tailgate? I just need it as a trailer.

02-01-2013, 11:34 AM	#66
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Factory big block parts No, I have a frame with a junk bed on it.

02-01-2013, 12:56 PM	#68
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Factory big block parts pm sent...

02-02-2013, 02:10 AM	#69
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Factory big block parts Did anyone buy the in-bed spare tire mount? If not I'll take it. Thanks Mike.

02-02-2013, 12:08 PM	#71
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Factory big block parts Sounds good, please send me payment information. Pay pal or money order? Thanks Mike.

02-04-2013, 12:59 PM	#74
Travisc454 Registered User Join Date: Mar 2012 Location: Houston Tx. Posts: 43	Re: Factory big block parts I need the upper bed moldings if available?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.