TX Parting Out 1972 Blazer - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bigdav160 · 05-12-2013, 11:23 AM

I need this single compressor bracket

TIA

CheyenneSuper72 · 05-12-2013, 11:31 AM

Brackets are sold pending payment, I will pm you if it falls through. Thanks!

CheyenneSuper72 · 05-12-2013, 11:39 AM

Front bumper brackets, rear bumper brackets, engine harness, light harness, underdash light harness, and carb are SOLD!!

briank · 05-12-2013, 01:07 PM

Thought I was second in line on the speaker?I passed on the carb
Posted via Mobile Device

**DeadheadNM** · 05-12-2013, 01:07 PM

Sorry buddy one more request. The bracket w bolt circled below:

BlazerTime · 05-12-2013, 01:29 PM

Thanks for working out the pickup details with me on the AC stuff and the grill assembly.

I also want the transfer case shifter ring you sent the picture of.

Additionally, if the two vapor lines that go around the back of the fuel tank and the drivers side front park / turn light assembly are available and good I will take those too.

Let me know what of the additional is available and the pricing and I will get you paid.

Thanks for your help!
Posted via Mobile Device

CheyenneSuper72 · 05-12-2013, 02:31 PM

Briank you are right you were next in line. Sorry about that. The speaker assembly has been sold. Thanks for the interest.

DeadheadNM that bracket was left on the wiring. It was boxed as dropped off yesterday. Sorry about that. Thanks.

Blazertime pm sent.
Posted via Mobile Device

**DeadheadNM** · 05-12-2013, 02:48 PM

Thanks bud - payment sent!

Bigdav160 · 05-12-2013, 05:03 PM

Speedometer? I might be interested in the whole cluster.

Mine has been messed with.

That's a cool luggage rack.

CheyenneSuper72 · 05-12-2013, 06:49 PM

The gauge cluster is there but most of the gauges are faded. The bezel is broke in the pass corner. I would do $25 plus the ride.

Someone needs this cool luggage rack

Posted via Mobile Device

**DeadheadNM** · 05-12-2013, 07:19 PM

What's the condition of the rack and any idea if this a dealer installed piece? All attachment hardware there with gaskets? Interested in cost shipped to 87110 but would have to build a Blazer beneath it. Thanks again!

CheyenneSuper72 · 05-12-2013, 07:41 PM

pictures of hubs for too much stuff
DeadheadNM- I believe it is a dealer installed piece....It has some hail dings but appears to be all there....let me know if you need to know anything else....It has some cool steps mounted below the doors to match the roof rack

**DeadheadNM** · 05-12-2013, 11:49 PM

Sure - more pics when poss and some of the steps would be cool to. Thanks man.

**D.PASSMORE** · 05-13-2013, 08:08 PM

I'll take TB 350 cable and bracket. Been out of town, sorry for the late reply.

**TBONE1964** · 05-13-2013, 08:18 PM

Quote:

Originally Posted by DeadheadNM

Thanks bud - payment sent!

DeadheadNM, I have that bracket if you still need it. Sent you a PM. Let me know.

**DeadheadNM** · 05-13-2013, 11:44 PM

Quote:

Originally Posted by TBONE1964

DeadheadNM, I have that bracket if you still need it. Sent you a PM. Let me know.

Reply sent. Thanks!!!

Jtrux · 05-14-2013, 01:31 AM

Where are you located?

CheyenneSuper72 · 05-14-2013, 03:22 PM

Pm sent
Posted via Mobile Device

AMD6769 · 05-15-2013, 12:25 AM

is the gas pedal for sale if so how much shipped 94601 thanks

CheyenneSuper72 · 05-15-2013, 12:40 AM

D.Passmore I will try and get that off this week. I have been really busy the last couple of days.

Gas pedal assembly is sold already. Sorry.
Posted via Mobile Device

**D.PASSMORE** · 05-15-2013, 06:30 AM

Understand, FYI - its one bolt (7/16 head) for the trans cable. Un hooks out of the transmission. Thanks

**CUSTOM/10** · 05-15-2013, 07:16 AM

Is the high hump available, if so what kind of shape is it in, and how much $.

Gary

CheyenneSuper72 · 05-15-2013, 07:10 PM

High hump is not for sale. I am going to use it. Thanks
Posted via Mobile Device

CheyenneSuper72 · 05-15-2013, 09:39 PM

Roof rack and steps.
Posted via Mobile Device

CheyenneSuper72 · 05-15-2013, 09:43 PM

Posted via Mobile Device

05-12-2013, 11:23 AM	#51
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Parting Out 1972 Blazer I need this single compressor bracket TIA Attached Images __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

05-12-2013, 11:31 AM	#52
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer Brackets are sold pending payment, I will pm you if it falls through. Thanks!

05-12-2013, 11:39 AM	#53
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer Front bumper brackets, rear bumper brackets, engine harness, light harness, underdash light harness, and carb are SOLD!!

05-12-2013, 01:07 PM	#54
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: Parting Out 1972 Blazer Thought I was second in line on the speaker?I passed on the carb Posted via Mobile Device

05-12-2013, 01:07 PM	#55
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: Parting Out 1972 Blazer Sorry buddy one more request. The bracket w bolt circled below: Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-12-2013, 01:29 PM	#56
BlazerTime Registered User Join Date: Oct 2012 Location: Stilwell, KS Posts: 46	Re: Parting Out 1972 Blazer Thanks for working out the pickup details with me on the AC stuff and the grill assembly. I also want the transfer case shifter ring you sent the picture of. Additionally, if the two vapor lines that go around the back of the fuel tank and the drivers side front park / turn light assembly are available and good I will take those too. Let me know what of the additional is available and the pricing and I will get you paid. Thanks for your help! Posted via Mobile Device

05-12-2013, 02:31 PM	#57
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer Briank you are right you were next in line. Sorry about that. The speaker assembly has been sold. Thanks for the interest. DeadheadNM that bracket was left on the wiring. It was boxed as dropped off yesterday. Sorry about that. Thanks. Blazertime pm sent. Posted via Mobile Device

05-12-2013, 02:48 PM	#58
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: Parting Out 1972 Blazer Thanks bud - payment sent! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-12-2013, 05:03 PM	#59
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Parting Out 1972 Blazer Speedometer? I might be interested in the whole cluster. Mine has been messed with. That's a cool luggage rack. __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

05-12-2013, 06:49 PM	#60
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer The gauge cluster is there but most of the gauges are faded. The bezel is broke in the pass corner. I would do $25 plus the ride. Someone needs this cool luggage rack Posted via Mobile Device

05-12-2013, 07:19 PM	#61
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: Parting Out 1972 Blazer What's the condition of the rack and any idea if this a dealer installed piece? All attachment hardware there with gaskets? Interested in cost shipped to 87110 but would have to build a Blazer beneath it. Thanks again! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-12-2013, 07:41 PM	#62
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer pictures of hubs for too much stuff DeadheadNM- I believe it is a dealer installed piece....It has some hail dings but appears to be all there....let me know if you need to know anything else....It has some cool steps mounted below the doors to match the roof rack Attached Images

05-12-2013, 11:49 PM	#63
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: Parting Out 1972 Blazer Sure - more pics when poss and some of the steps would be cool to. Thanks man. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-13-2013, 08:08 PM	#64
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Re: Parting Out 1972 Blazer I'll take TB 350 cable and bracket. Been out of town, sorry for the late reply. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-14-2013, 01:31 AM	#67
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Parting Out 1972 Blazer Where are you located? __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!



Register or Log In To remove these advertisements.

05-14-2013, 03:22 PM	#68
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer Pm sent Posted via Mobile Device

05-15-2013, 12:25 AM	#69
AMD6769 Registered User Join Date: Nov 2006 Location: OAKLAND CALI Posts: 61	Re: Parting Out 1972 Blazer is the gas pedal for sale if so how much shipped 94601 thanks

05-15-2013, 12:40 AM	#70
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer D.Passmore I will try and get that off this week. I have been really busy the last couple of days. Gas pedal assembly is sold already. Sorry. Posted via Mobile Device

05-15-2013, 06:30 AM	#71
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Re: Parting Out 1972 Blazer Understand, FYI - its one bolt (7/16 head) for the trans cable. Un hooks out of the transmission. Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-15-2013, 07:16 AM	#72
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: Parting Out 1972 Blazer Is the high hump available, if so what kind of shape is it in, and how much $. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

05-15-2013, 07:10 PM	#73
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer High hump is not for sale. I am going to use it. Thanks Posted via Mobile Device

05-15-2013, 09:39 PM	#74
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer Roof rack and steps. Posted via Mobile Device Attached Images

05-15-2013, 09:43 PM	#75
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Parting Out 1972 Blazer Posted via Mobile Device Attached Images

Register or Log In To remove these advertisements.