CA 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Budman56 · 05-28-2013, 09:59 PM

Quote:

Originally Posted by rideblue00

That alternator looks original. It should have markings on it, as to amperage rating. Ruff the sides down good with stiff wire brush. All of mine have the ratings on them.

Here is all that I seen on the alt

**yelmer** · 05-29-2013, 12:32 AM

hello I pm you on 5-24 on the alternator ? and some other stuff did not here back? thanks mike

**argonaut** · 05-29-2013, 01:41 AM

I really want the doors. But how to get them to so cal?
Hmm, I have family near merced in a****er that could give you the cash and hold them for me. You eve make it out that way?

Also do you have more photos of the doors?

Posted via Mobile Device

**Clyde65** · 05-29-2013, 08:36 AM

I'm interested in the body molding, can you send me pricing with shipping to 76063, business address. also tell me what parts are missing and the condition.

Thanks

Budman56 · 05-29-2013, 02:13 PM

Quote:

Originally Posted by Clyde65

I'm interested in the body molding, can you send me pricing with shipping to 76063, business address. also tell me what parts are missing and the condition.

Thanks

Only the door pieces are good, I am asking $50 for those and shipping is $16

**Clyde65** · 05-29-2013, 02:21 PM

Thanks Budman56, Ill pass. I would like the whole thing but am too cheap to buy new ( $450)

Budman56 · 05-29-2013, 02:40 PM

Quote:

Originally Posted by argonaut

I really want the doors. But how to get them to so cal?
Hmm, I have family near merced in a****er that could give you the cash and hold them for me. You eve make it out that way?

Also do you have more photos of the doors?

Posted via Mobile Device

Here are photos of the two doors that I have they are rusted in the usualy spots pin holes on the front side of both doors, and a peach size hole in the front bottom of both doors, they are repairable and not as bad as Ive seen on others. I do have an extra set of door with nothing in them, the bottoms are perfect and could be used to repair the orange 66 doors. This doesnt incluid the molding or the mirrors but everything else is there.

cost for all four doors would be $300.00. no shipping as I could possible drop them off to you in the up coming weeks as I will be passing through riverside to pick up my 56 cab that is being powder coated. let me know what you think.

Budman56 · 05-29-2013, 02:53 PM

Quote:

Originally Posted by yelmer

hello I pm you on 5-24 on the alternator ? and some other stuff did not here back? thanks mike

Sorry mike its been really busy here trying to get evething tore down, this is not the only truck I have I also tore down a 60 so anyway, the parts you asked for

1) radiator is not for sale I am keeping it for my truck.
2) alt. dont know if it is factory or not is for sale $40?
3) kickdown switch with bracket is for sale $40?
4) glove box didnt have spid sticker on it, but still for sale $20

I dont have a photo of the kickdown switch i will try to get one tonight for you.

HOTFUN · 05-29-2013, 03:32 PM

Still on for water pump pulley price and do you have the orange single wire harness from the kickdown switch to the transmission? Thanks, Mark

Budman56 · 05-29-2013, 03:52 PM

Quote:

Originally Posted by HOTFUN

Still on for water pump pulley price and do you have the orange single wire harness from the kickdown switch to the transmission? Thanks, Mark

Mark did I give you a price? Sorry I cant remember if not how about $25 and the shipping from ups is $21

Budman56 · 05-29-2013, 03:53 PM

Quote:

Originally Posted by HOTFUN

Still on for water pump pulley price and do you have the orange single wire harness from the kickdown switch to the transmission? Thanks, Mark

yes there is a single orange wire only.

Budman56 · 05-29-2013, 03:54 PM

Parts that have been sold
1) ac.
2) grille.
3) cab.
4)

**yelmer** · 05-29-2013, 05:59 PM

I will take the kickdown switch with bracket was the build sheet behind the seat? thanks mike . do you have a picture of the kick down switch thanks

bonehead · 05-29-2013, 08:45 PM

If the steering column and linkage to the trans is for a turbo 400 I would be interested. How much shipped to 28227. thanks

Budman56 · 05-29-2013, 08:57 PM

Quote:

Originally Posted by bonehead

If the steering column and linkage to the trans is for a turbo 400 I would be interested. How much shipped to 28227. thanks

What I have is the 66 automatic column with no steering wheel, I am asking $250.00 plus shipping. the shipping to your zip is roughly $90 thru ups depending on what day its shipped.

**argonaut** · 05-30-2013, 12:41 AM

I'm in for the doors. Riverside will work well. I live in long beach but my dad is out in riverside. When will you be coming down? I'm out of town one weekend in June, the 22nd and 23rd I think.
Posted via Mobile Device

bonehead · 05-30-2013, 06:59 AM

Quote:

Originally Posted by Budman56

What I have is the 66 automatic column with no steering wheel, I am asking $250.00 plus shipping. the shipping to your zip is roughly $90 thru ups depending on what day its shipped.

Thanks but I'll pass it on to the next guy.

Budman56 · 05-30-2013, 12:08 PM

Quote:

Originally Posted by HOTFUN

Still on for water pump pulley price and do you have the orange single wire harness from the kickdown switch to the transmission? Thanks, Mark

Here is the photo of the kickdown switch and bracket. asking $40

Budman56 · 05-30-2013, 12:13 PM

Quote:

Originally Posted by bonehead

Thanks but I'll pass it on to the next guy.

no problem here are photos of the 66 chevy column with no steering wheel, asking $250.00 plus shipping

Budman56 · 05-30-2013, 12:14 PM

Quote:

Originally Posted by argonaut

I'm in for the doors. Riverside will work well. I live in long beach but my dad is out in riverside. When will you be coming down? I'm out of town one weekend in June, the 22nd and 23rd I think.
Posted via Mobile Device

ok I pm with the details of when I will be going down next.

**yelmer** · 05-30-2013, 10:20 PM

will take kickdown and bracket zip 80634 thanks

Budman56 · 05-31-2013, 12:58 PM

Quote:

Originally Posted by yelmer

will take kickdown and bracket zip 80634 thanks

Sold to yelmer pending payment (sent pm)

HOTFUN · 05-31-2013, 02:07 PM

I'll take the water pump 3 groove pulley for $25 plus shipping. PM sent for payment amount and address. Thanks, Mark

tmills213 · 06-01-2013, 10:50 PM

Hello,

Looking for trailing arms for my c20 camper special. C10 should work with reinforcement. Are they available? condition? shipping to 49464.

thanks

Jr_Built · 06-02-2013, 10:01 PM

How bad is the rest of the trim on the truck? i know you say bad. but i don't want perfect.

05-29-2013, 12:32 AM	#52
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) hello I pm you on 5-24 on the alternator ? and some other stuff did not here back? thanks mike

05-29-2013, 01:41 AM	#53
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) I really want the doors. But how to get them to so cal? Hmm, I have family near merced in a***er that could give you the cash and hold them for me. You eve make it out that way? Also do you have more photos of the doors? Posted via Mobile Device* __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! Last edited by argonaut; 05-29-2013 at 01:47 AM.

05-29-2013, 08:36 AM	#54
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) I'm interested in the body molding, can you send me pricing with shipping to 76063, business address. also tell me what parts are missing and the condition. Thanks __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

05-29-2013, 02:21 PM	#56
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) Thanks Budman56, Ill pass. I would like the whole thing but am too cheap to buy new ( $450) __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

05-29-2013, 03:32 PM	#59
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) Still on for water pump pulley price and do you have the orange single wire harness from the kickdown switch to the transmission? Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

05-29-2013, 03:54 PM	#62
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) Parts that have been sold 1) ac. 2) grille. 3) cab. 4) __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ Last edited by Budman56; 06-02-2013 at 11:40 AM.

05-29-2013, 05:59 PM	#63
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) I will take the kickdown switch with bracket was the build sheet behind the seat? thanks mike . do you have a picture of the kick down switch thanks

05-29-2013, 08:45 PM	#64
bonehead Registered User Join Date: Jun 2007 Location: Charlotte, NC Posts: 516	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) If the steering column and linkage to the trans is for a turbo 400 I would be interested. How much shipped to 28227. thanks __________________ past trucks: 1980 C-10 Silverado SWB 1961 C-10 custom cab LWB 1966 C-10 custom cab LWB

05-30-2013, 12:41 AM	#66
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) I'm in for the doors. Riverside will work well. I live in long beach but my dad is out in riverside. When will you be coming down? I'm out of town one weekend in June, the 22nd and 23rd I think. Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

05-30-2013, 10:20 PM	#71
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) will take kickdown and bracket zip 80634 thanks

05-31-2013, 02:07 PM	#73
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) I'll take the water pump 3 groove pulley for $25 plus shipping. PM sent for payment amount and address. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

06-01-2013, 10:50 PM	#74
tmills213 Registered User Join Date: Jan 2011 Location: Normal il Posts: 173	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) Hello, Looking for trailing arms for my c20 camper special. C10 should work with reinforcement. Are they available? condition? shipping to 49464. thanks

06-02-2013, 10:01 PM	#75
Jr_Built Registered User Join Date: Mar 2013 Location: Milwaukee, WI Posts: 4	Re: 66 c20 parts (ac) (pw assit steering) (aluminum grille) (chrome bumper) (sails) How bad is the rest of the trim on the truck? i know you say bad. but i don't want perfect.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.