AZ Parting out a 69 gmc 2wd - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CUSTOM/10** · 07-16-2013, 07:01 AM

Got the horns, look good ! Thanks Tom !

Gary

boynton · 07-16-2013, 09:07 AM

Quote:

Originally Posted by t korinek

ZOOKEENEY, will get u some pics.

BBrendal sorry about that, too much stuff going on this weekend, PM in the mail.

Bignbad, no problem!

Oddfire, forward harness actually pretty decent, there is one spot on the red heavy wire that has some coating stripped away, otherwise the rest is all good
$55 shipped

boynton, ac system would include everything including AC compressor & brackets, all of it looks good except the diverter box flap is cracked.
Shipping I would guess would run $70-$90 lot of heavy & bulky parts.

Engine sold to tdkosta

Just to confirm it is original style a/c? And ill take it. I'm in no rush so if we can get closer to the $70 shipping that would be great also have a business address if that helps pm payment info.
Posted via Mobile Device

69Rumbler · 07-16-2013, 01:22 PM

do you have the kick down switch if so i will buy it

sKnNyPpY · 07-16-2013, 05:33 PM

I'm interested in the tailgate. I can have someone pick up locally but trying to figure out if I can afford shipping to SC. $150 including all hardware?

hpautoaccessories · 07-16-2013, 07:19 PM

Hi, I am looking for the fuel pedal assembly from the pedal to the carb. Also need the bracket that the ashtray slides into.

tdkosta · 07-16-2013, 11:24 PM

Quote:

Originally Posted by t korinek

Did you pull the distributor out when you installed the engine? If not timing couldn't be too far off.
Firing order is 18436572 going clockwise with the # 1 plug wire position on the cap at about 5 o'clock looking at the distributor from the front of the engine, vacuum advance position is at about 8 o'clock.
Give me a call if it doesn't work out.
Tom.

Bump to the top for you.

Got it up and running. The wires were one spot off counterclockwise from the distributor diagram I was looking at. Thanks again. Next up is getting the factory AC I've collected installed. Do you know any shops that would be capable of installing it in a non AC cab?

**t korinek** · 07-17-2013, 12:18 AM

tdkosta, good deal, don't know anyone who is capable of thatc ac install at the moment.

hpautoaccessories, should have that pedal assembly & the ashtray, you need one for a ball bearing style ashtray?

sknnyppy $150 includes the hinges & trunions if you need them

69rumbler this had a turbo 350 in it.

Boynton, I'l get all the ac stuff together, it was an original ac system.

CUSTOM/10 good deal!

Jorgenson52, rear view was gone.

hpautoaccessories · 07-17-2013, 03:45 AM

not sure about the style to be honest. Got the truck (1970 CST) and most of it was in boxes. Wrapping up the interior and cannot locate the bracket that the ashtray would slide into that bolts to the dash. I did find an ashtray but I'm not 100% that is was original to the truck. Any help is greatly appreciated.

hpautoaccessories · 07-17-2013, 03:56 AM

ashtray looks like this (found on ebay): I think it is the ball bearing type.

ZOOKEENEY · 07-20-2013, 04:15 PM

Pictures of front fenders?
Posted via Mobile Device

boynton · 07-20-2013, 04:47 PM

Quote:

Originally Posted by t korinek

tdkosta, good deal, don't know anyone who is capable of thatc ac install at the moment.

hpautoaccessories, should have that pedal assembly & the ashtray, you need one for a ball bearing style ashtray?

sknnyppy $150 includes the hinges & trunions if you need them

69rumbler this had a turbo 350 in it.

Boynton, I'l get all the ac stuff together, it was an original ac system.

CUSTOM/10 good deal!

Jorgenson52, rear view was gone.

PM me when you get everything ready and let me know how you want to get paid with the total
Posted via Mobile Device

**t korinek** · 07-20-2013, 05:55 PM

Boynton, Ok will do

ZOOKEENEY forgot your pics, will get them soon.

hpautoaccessories I have ashtrays ball bearing & the plastic slider style $15 shipped

BBrendal · 07-21-2013, 12:32 AM

Got the parts Tom! Perfect as usual. Thanks.

tdj4bama · 07-21-2013, 11:22 PM

Got the brake parts yesterday and finished bleeding the lines today. Thanks Tom and a bump to the top for you.
Posted via Mobile Device

hpautoaccessories · 07-22-2013, 11:11 PM

hi, i checked the project and the ashtray I have is the plastic slider type. However if you have the ball bearing type with the receiver (bolts to the dash, this is the pc. that I am missing) I will def. take for $15 shipped. I also need to know if you have the fuel pedal assembly. Just need the rod from the pedal through the firewall. LMK. thanks

kriswvu1202 · 07-23-2013, 06:30 PM

I'm looking for the rear leaf spring to frame shackle. The one for the front of the spring that attaches to the frame. Can you help me out?

crimespree · 07-23-2013, 06:48 PM

Whats the story on the rear bumper? Shipped to 36301

crimespree · 07-23-2013, 06:49 PM

Quote:

Originally Posted by crimespree

Whats the story on the rear bumper? Shipped to 36301

NVM Just read back through and realized they were sold.

boynton · 08-04-2013, 09:11 PM

Just checking to see if you have the a/c stuff ready to go...

Quote:

Originally Posted by t korinek

Boynton, Ok will do

ZOOKEENEY forgot your pics, will get them soon.

hpautoaccessories I have ashtrays ball bearing & the plastic slider style $15 shipped

**t korinek** · 08-05-2013, 03:07 PM

Boynton, here's pics of the ac stuff, vents are included too, not pictured I'll do the $70 shipped to a business addy & if its any more I'll cover it.
Any ?? let me know

**t korinek** · 08-05-2013, 03:12 PM

More pics of the fenders, straight, bondo squirting out of trim & badge holes where they filled in, some pin holes in bottom cup.

boynton · 08-05-2013, 03:18 PM

Quote:

Originally Posted by t korinek

Boynton, here's pics of the ac stuff, vents are included too, not pictured I'll do the $70 shipped to a business addy & if its any more I'll cover it.
Any ?? let me know

Looks good send me paypal info and ill reply with business address
Posted via Mobile Device

coahmike00 · 08-14-2013, 10:23 PM

how about booster complete?

**t korinek** · 08-14-2013, 11:27 PM

sold the booster & assembly already

jbrogan · 08-15-2013, 02:59 AM

If the headers are available, what would you need?
Posted via Mobile Device

07-16-2013, 07:01 AM	#51
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,810	Re: Parting out a 69 gmc 2wd Got the horns, look good ! Thanks Tom ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

07-16-2013, 01:22 PM	#53
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: Parting out a 69 gmc 2wd do you have the kick down switch if so i will buy it __________________ 1969 C20 CUSTOM "RUMBLEr"

07-16-2013, 05:33 PM	#54
sKnNyPpY Registered User Join Date: Sep 2012 Location: Columbia, SC Posts: 549	Re: Parting out a 69 gmc 2wd I'm interested in the tailgate. I can have someone pick up locally but trying to figure out if I can afford shipping to SC. $150 including all hardware? __________________ Life is too long to go slow... 71 GMC 1500 Super Custom LWB 350/350 AC(replaced w/vintage air)/PS/PB 2.5 CPP Spindle, 1" CPP Drop Spring, CPP Front and Rear Sway Bars/DJM Flip, new General Spring KC 5 spring pack, HEI /IntReg Alt 20x8.5 OldSkools 5" BS, 275/45 Falkens

07-16-2013, 07:19 PM	#55
hpautoaccessories Registered User Join Date: Jun 2013 Location: West Chester, Ohio Posts: 5	Re: Parting out a 69 gmc 2wd Hi, I am looking for the fuel pedal assembly from the pedal to the carb. Also need the bracket that the ashtray slides into.

07-17-2013, 12:18 AM	#57
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd tdkosta, good deal, don't know anyone who is capable of thatc ac install at the moment. hpautoaccessories, should have that pedal assembly & the ashtray, you need one for a ball bearing style ashtray? sknnyppy $150 includes the hinges & trunions if you need them 69rumbler this had a turbo 350 in it. Boynton, I'l get all the ac stuff together, it was an original ac system. CUSTOM/10 good deal! Jorgenson52, rear view was gone. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-17-2013, 03:45 AM	#58
hpautoaccessories Registered User Join Date: Jun 2013 Location: West Chester, Ohio Posts: 5	Re: Parting out a 69 gmc 2wd not sure about the style to be honest. Got the truck (1970 CST) and most of it was in boxes. Wrapping up the interior and cannot locate the bracket that the ashtray would slide into that bolts to the dash. I did find an ashtray but I'm not 100% that is was original to the truck. Any help is greatly appreciated.

07-17-2013, 03:56 AM	#59
hpautoaccessories Registered User Join Date: Jun 2013 Location: West Chester, Ohio Posts: 5	Re: Parting out a 69 gmc 2wd ashtray looks like this (found on ebay): I think it is the ball bearing type. Attached Images

07-20-2013, 04:15 PM	#60
ZOOKEENEY Registered User Join Date: Feb 2007 Location: Bangs,TX Posts: 246	Re: Parting out a 69 gmc 2wd Pictures of front fenders? Posted via Mobile Device __________________ Eric K

07-20-2013, 05:55 PM	#62
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd Boynton, Ok will do ZOOKEENEY forgot your pics, will get them soon. hpautoaccessories I have ashtrays ball bearing & the plastic slider style $15 shipped __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-21-2013, 12:32 AM	#63
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: Parting out a 69 gmc 2wd Got the parts Tom! Perfect as usual. Thanks. __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/

07-21-2013, 11:22 PM	#64
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: Parting out a 69 gmc 2wd Got the brake parts yesterday and finished bleeding the lines today. Thanks Tom and a bump to the top for you. Posted via Mobile Device

07-22-2013, 11:11 PM	#65
hpautoaccessories Registered User Join Date: Jun 2013 Location: West Chester, Ohio Posts: 5	Re: Parting out a 69 gmc 2wd hi, i checked the project and the ashtray I have is the plastic slider type. However if you have the ball bearing type with the receiver (bolts to the dash, this is the pc. that I am missing) I will def. take for $15 shipped. I also need to know if you have the fuel pedal assembly. Just need the rod from the pedal through the firewall. LMK. thanks

07-23-2013, 06:30 PM	#66
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: Parting out a 69 gmc 2wd I'm looking for the rear leaf spring to frame shackle. The one for the front of the spring that attaches to the frame. Can you help me out? __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

07-23-2013, 06:48 PM	#67
crimespree Registered User Join Date: May 2009 Location: Dothan, AL Posts: 94	Re: Parting out a 69 gmc 2wd Whats the story on the rear bumper? Shipped to 36301 __________________ 1970 CST - http://67-72chevytrucks.com/vboard/s...d.php?t=350091 1979 Yamaha xs650 bobber - sold 2008 Harley Nightster

08-05-2013, 03:07 PM	#70
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd Boynton, here's pics of the ac stuff, vents are included too, not pictured I'll do the $70 shipped to a business addy & if its any more I'll cover it. Any ?? let me know Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

08-05-2013, 03:12 PM	#71
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd More pics of the fenders, straight, bondo squirting out of trim & badge holes where they filled in, some pin holes in bottom cup. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-14-2013, 10:23 PM	#73
coahmike00 Registered User Join Date: Jul 2013 Location: adamsville alabama Posts: 11	Re: Parting out a 69 gmc 2wd how about booster complete?

08-14-2013, 11:27 PM	#74
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Parting out a 69 gmc 2wd sold the booster & assembly already __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

08-15-2013, 02:59 AM	#75
jbrogan Registered User Join Date: May 2013 Location: Visalia Ca Posts: 40	Re: Parting out a 69 gmc 2wd If the headers are available, what would you need? Posted via Mobile Device

Register or Log In To remove these advertisements.