RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!

[SparkyRnD]

Pre-Christmas bump!

[SparkyRnD]

Bringing up for the new year!

[Rob Fisher]

Sparky
I have a 64 GMC with a 383 Stroker making about 525 HP hooked to a 700R4.
Can you offer some recommendations and pricing for a replacement aluminum radiator shipped to Blaine , WA , 98230
Please let me know what other info you need.
Thanks
Rob Fisher

[SparkyRnD]

For that power range, I'd go with our radiator and the upgraded 16" Spal fan kit. The forum discounted prices are as follows:

Radiator: $425
Fan & Shroud Kit: $340
Controller with Relay: $75
Shipping $80

If that works, all we need is an email address to send the payment request and we can get started.

[Rob Fisher]

Could you answer a couple of questions for me.
1. Would this be the down flow or the new cross flow that you have been working on.
2. Will the cross flow fit in the existing opening as the down flow or is there some fabrication that will need to be done.
3. Which would you recommend, is one better then the other
4. I am also going to need an overflow tank as well, can you let me know which one I should use and how much it is.
5. What type of fittings are there for the trans lines. are there options.
Thanks for your help
Rob

[SparkyRnD]

No problem.

1. downflow is what is available now. Crossflow, if you want to do the test fit, we can make it as a crossflow
2. it will be designed so that both fit in the same space, no mods required
3. crossflow allows a little longer in the tubes, which means more heat transfer, so a few degrees cooler
4. the standard cylinder is what most C10 guys order, those are $110 with discount and ship separately for $17
5. trans has two ports that are 1/4" NPT / MIP

[Rob Fisher]

Sparky
Do you have a picture that you can send me a picture of what a cross flow will look like. If not for my truck but something similar.
Thanks
Rob

[SparkyRnD]

Here is a crossflow that we make for the Nova, just so you have an idea of what it will look like (the tanks will be on the left and right instead of the downflow which has them on the top and bottom):

[SparkyRnD]

back up again

[SparkyRnD]

Thanks for the support guys, and remember we can accommodate any engine swap!

[SparkyRnD]

back up again

[Bret B]

Is the cross flow available for the 63-66 C10 as of yet, and what would be the forum cost on those? Shipping to 98374?

[SparkyRnD]

It's on our to-do list, just haven't made it yet. After I knock out a few of these existing orders, I'll go ahead and make one. Shipping up there for just the radiator is $75. Let me know if you'd like to order.

[Bret B]

Appreciate the response. Is it going to be the same cost of $425 for forum members, or is it coming in at a different cost?

[SparkyRnD]

It will be the same cost!

[SparkyRnD]

back up again!

[SparkyRnD]

be sure to ask for your discount when ordering!

[SparkyRnD]

back up!

[SparkyRnD]

bringing around again. We've been slammed for the last few months and are just getting over the hump. Feel free to call, email or PM!

[dwcardfan]

Thanks again Sparky. Here is a pic of it installed in my 65.

[SparkyRnD]

Looks good!

[SparkyRnD]

Hope everyone has a great Memorial Day weekend, and remembers those that sacrificed for us!

[SparkyRnD]

let us help keep your truck cool!

[SparkyRnD]

back up top!

[SparkyRnD]

bringing up again!