Crossing over, the 65 rebuild. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NEWFISHER · 10-12-2013, 12:26 PM

Windshield and rear window with chrome lock bead is in! What a pain in the arse the front was.

Tailgate in epoxy primer and am going to seal it and spray it today. The Mar-K doesn't use chains so I shaved the OE stuff from the rear bed area. Here's a pic of the gate, it's nice! I like the inner handle too, but when mocking it all up I kept trying to open it from the outside like all of the other trucks I have and have owned.

The cowl panel wasn't prepped when the shot it the first time and had some peeling paint and they had also ran the hood into it a few times trying to adjust it , so I bead blasted it clean and going to re shoot it too.

Masking the new caps up to shoot them pearl white and going to try to get the sides 2 toned tomorrow. Our car club has a cruise through the South Valley today and through 7 old covered bridges. Going to get as much done before I load the dogs up and head out.

.

.

**pimpston65** · 10-12-2013, 12:33 PM

is the rear chrome trim a factory piece? and where can i get one for my BBW?

NEWFISHER · 10-12-2013, 02:05 PM

Quote:

Originally Posted by pimpston65

is the rear chrome trim a factory piece? and where can i get one for my BBW?

The Custom cab option never came with a rear chrome lock bead, it's an aftermarket thing and readily available at any glass shop or restoration parts wharehouse online. It's bought by the foot off a roll and cheap. Once you remove the black bead , the rear glass will almost fall out so be carefull.

NEWFISHER · 10-12-2013, 07:15 PM

I can't stand the " everything is Orange" theme on the truck. Yarded the panels off and are going to keep the inner area orange, tri stage orange pearl white the relief stripe and use the same brown on the column, carpet, visors and seat beading around the outer area of the panel.

Masked it up and shooting the tail end of the bed, blending the new tailgate color, hiding the smoothed body work rear panels and then reverse masking it to shoot the white tri stage. un mask the orange again and then shoot both colors with some clear.

Shot the caps with the tri stage pearl and I will let everything sit until the morning, unmask it , remask the panels and the caps and am going to shoot some more colors. Should be all done by noon.

.

duallyjams · 10-12-2013, 11:11 PM

Your a painting machine, moving right along.

NEWFISHER · 10-13-2013, 01:39 AM

Must be in the water. Here's what my buddy did in the 9 hours I was working on my truck. He disected his 78 chevy and is doing a cab swap, engine swap and refinish of bed, doors, fenders etc in the next week. He's like watching a one man version of Overhaulin

Jmorales3181 · 10-13-2013, 11:49 AM

Nice progress! Truck is looking really nice!
Looks like a productive 9 hr day

**clemdaddy** · 10-13-2013, 10:05 PM

great job on the paint work. its good to see so much progress in a short period of time. you took a nice looking truck most guys would be happy with and turned it into a real beauty. i'm starting to like it almost as much as the suburban... almost.

NEWFISHER · 10-13-2013, 10:26 PM

.
Thanks guys!

Finished painting the hub caps this morning. Man I wish my wife was a nail technician lol, masking sucks. I hung the tailgate , bumper, lights etc and tri toned the door panels to match the brown seat bead and column also to bring some more white into the cab. They were also dented up pretty good on the outer band and I body worked them to straighten them up.

.
Took it out for a drive to a friends place. My wife is driving it and likes it! Still have to do a spray in bedliner, detail the wood floor and letter the tailgate before I tear into the suspension.
.
.

.
.

Low Elco · 10-14-2013, 03:32 AM

Looks sharp! Those door panels really pop!

Spragg · 10-14-2013, 08:27 AM

Your truck is coming along very nice, Cant wait to see it lower.

McMurphy · 10-14-2013, 04:21 PM

VERY nicely done !!
Your color combos and coordination are excellent!
I particularly like the door panels and the hub caps !!

Ta2Don · 10-14-2013, 04:35 PM

Quote:

Originally Posted by mcmurphy

very nicely done !!
Your color combos and coordination are excellent!
I particularly like the door panels and the hub caps !!

x2

Bomp · 10-14-2013, 09:51 PM

Lookin Sweet. Can't wait to see it when your showing it. Any show in particular show you going to hit first?

NEWFISHER · 10-15-2013, 02:35 AM

Thanks guys.

Bomp. I generally don't ever participate in the shows unless the parking lot is full and there isn't any good spots left. Its going to be a fun year. I drive a 50 burb daily and am throwing this 65 together for my wife. She's liking it better every day and am sure she will want to hit Billet Proof , Goodguys, CoolApril nights etc with a girlfriend in her truck while I haul the boys and our dogs in mine.

Thought I had the fuel gauge working tonight, but now stuck on half and after pulling the sender and reusing the gasket, smells like fuel in the cab. Good news, both visors are dyed and installed, rear brakes adjusted and 1 more burn out on the new tires! I'm kinda liking the V8 in this one.

chakah · 10-15-2013, 07:41 AM

Came out really sweet bro

NEWFISHER · 10-16-2013, 08:14 PM

Tossed on some B pillar trim
http://www.67-72chevytrucks.com/vboa...d.php?t=600688

.
.

NEWFISHER · 10-16-2013, 09:32 PM

Installed some chrome letters, soon to be outlined in white pinstripe. Also tossed on some over riders.....which means an altitude adjustment is comming.

.
.

duallyjams · 10-16-2013, 09:39 PM

Huh this 65 is for your wife, the 65 I have is the wife's both are swb bbw v8 auto.
What's the plan on the suspension, there are sooooo many option, ride tech, no limit, porter built, ect.

NEWFISHER · 10-16-2013, 10:41 PM

Quote:

Originally Posted by duallyjams

Huh this 65 is for your wife, the 65 I have is the wife's both are swb bbw v8 auto.
What's the plan on the suspension, there are sooooo many option, ride tech, no limit, porter built, ect.

I have 2.5 spindles and 2" blocks with a notch waiting and will bag it when I convert to disc. Going to leave the stock crossmember and a arms for now, Porterbuilt and a raised bed later.

**LEEVON** · 10-16-2013, 11:21 PM

Wow, love what you have done with this, so clean and my favorite two colors.

Dinos63 · 10-17-2013, 12:24 AM

first things first welcome down here with us 60-66 dudes and 100% on the truck you nailed it on the make over

and that sub is bananas!

chevyrestoguy · 10-17-2013, 10:45 AM

The truck is looking great! I really like all of the subtle touches (like the tailgate) that you did on the truck. It's a ton of work for something so "stealthy", but I love that kind of stuff. It's attention to detail, and your truck nails that theme perfectly.

Can't wait to see what you've got planned for the suspension.

Ta2Don · 10-17-2013, 10:56 AM

Quote:

Originally Posted by NEWFISHER

Also tossed on some over riders.....which means an altitude adjustment is comming.

C/10 King · 10-17-2013, 01:55 PM

Holy de-ja vu!!!!

I liking it all!!!

10-12-2013, 12:26 PM	#51
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Crossing over, the 65 rebuild. Windshield and rear window with chrome lock bead is in! What a pain in the arse the front was. Tailgate in epoxy primer and am going to seal it and spray it today. The Mar-K doesn't use chains so I shaved the OE stuff from the rear bed area. Here's a pic of the gate, it's nice! I like the inner handle too, but when mocking it all up I kept trying to open it from the outside like all of the other trucks I have and have owned. The cowl panel wasn't prepped when the shot it the first time and had some peeling paint and they had also ran the hood into it a few times trying to adjust it , so I bead blasted it clean and going to re shoot it too. Masking the new caps up to shoot them pearl white and going to try to get the sides 2 toned tomorrow. Our car club has a cruise through the South Valley today and through 7 old covered bridges. Going to get as much done before I load the dogs up and head out. . . . . . . . .

10-12-2013, 12:33 PM	#52
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,189	Re: Crossing over, the 65 rebuild. is the rear chrome trim a factory piece? and where can i get one for my BBW?

10-12-2013, 07:15 PM	#54
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Crossing over, the 65 rebuild. I can't stand the " everything is Orange" theme on the truck. Yarded the panels off and are going to keep the inner area orange, tri stage orange pearl white the relief stripe and use the same brown on the column, carpet, visors and seat beading around the outer area of the panel. Masked it up and shooting the tail end of the bed, blending the new tailgate color, hiding the smoothed body work rear panels and then reverse masking it to shoot the white tri stage. un mask the orange again and then shoot both colors with some clear. Shot the caps with the tri stage pearl and I will let everything sit until the morning, unmask it , remask the panels and the caps and am going to shoot some more colors. Should be all done by noon. . . . .

10-12-2013, 11:11 PM	#55
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Crossing over, the 65 rebuild. Your a painting machine, moving right along. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

10-13-2013, 01:39 AM	#56
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Crossing over, the 65 rebuild. Must be in the water. Here's what my buddy did in the 9 hours I was working on my truck. He disected his 78 chevy and is doing a cab swap, engine swap and refinish of bed, doors, fenders etc in the next week. He's like watching a one man version of Overhaulin

10-13-2013, 11:49 AM	#57
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: Crossing over, the 65 rebuild. Nice progress! Truck is looking really nice! Looks like a productive 9 hr day __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

10-13-2013, 10:05 PM	#58
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: Crossing over, the 65 rebuild. great job on the paint work. its good to see so much progress in a short period of time. you took a nice looking truck most guys would be happy with and turned it into a real beauty. i'm starting to like it almost as much as the suburban... almost.

10-13-2013, 10:26 PM	#59
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Crossing over, the 65 rebuild. . Thanks guys! Finished painting the hub caps this morning. Man I wish my wife was a nail technician lol, masking sucks. I hung the tailgate , bumper, lights etc and tri toned the door panels to match the brown seat bead and column also to bring some more white into the cab. They were also dented up pretty good on the outer band and I body worked them to straighten them up. . Took it out for a drive to a friends place. My wife is driving it and likes it! Still have to do a spray in bedliner, detail the wood floor and letter the tailgate before I tear into the suspension. . . . .

10-14-2013, 03:32 AM	#60
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Crossing over, the 65 rebuild. Looks sharp! Those door panels really pop! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

10-14-2013, 08:27 AM	#61
Spragg Registered User Join Date: Jul 2008 Location: Alberta Posts: 44	Re: Crossing over, the 65 rebuild. Your truck is coming along very nice, Cant wait to see it lower.

10-14-2013, 04:21 PM	#62
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: Crossing over, the 65 rebuild. VERY nicely done !! Your color combos and coordination are excellent! I particularly like the door panels and the hub caps !! __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

10-14-2013, 09:51 PM	#64
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Crossing over, the 65 rebuild. Lookin Sweet. Can't wait to see it when your showing it. Any show in particular show you going to hit first?

10-15-2013, 02:35 AM	#65
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Crossing over, the 65 rebuild. Thanks guys. Bomp. I generally don't ever participate in the shows unless the parking lot is full and there isn't any good spots left. Its going to be a fun year. I drive a 50 burb daily and am throwing this 65 together for my wife. She's liking it better every day and am sure she will want to hit Billet Proof , Goodguys, CoolApril nights etc with a girlfriend in her truck while I haul the boys and our dogs in mine. Thought I had the fuel gauge working tonight, but now stuck on half and after pulling the sender and reusing the gasket, smells like fuel in the cab. Good news, both visors are dyed and installed, rear brakes adjusted and 1 more burn out on the new tires! I'm kinda liking the V8 in this one.

10-15-2013, 07:41 AM	#66
chakah Registered User Join Date: Jun 2012 Location: El Paso, Tx. Posts: 283	Re: Crossing over, the 65 rebuild. Came out really sweet bro __________________ "El Jerry" '03 3500 Duramax dually '96 1500 ext. cab Chevy '66 swb C-10 '63 Panel '60 VW vert '56 VW vert

10-16-2013, 08:14 PM	#67
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Crossing over, the 65 rebuild. Tossed on some B pillar trim http://www.67-72chevytrucks.com/vboa...d.php?t=600688 . .



Register or Log In To remove these advertisements.

10-16-2013, 09:32 PM	#68
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Crossing over, the 65 rebuild. Installed some chrome letters, soon to be outlined in white pinstripe. Also tossed on some over riders.....which means an altitude adjustment is comming. . .

10-16-2013, 09:39 PM	#69
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Crossing over, the 65 rebuild. Huh this 65 is for your wife, the 65 I have is the wife's both are swb bbw v8 auto. What's the plan on the suspension, there are sooooo many option, ride tech, no limit, porter built, ect. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

10-16-2013, 11:21 PM	#71
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Crossing over, the 65 rebuild. Wow, love what you have done with this, so clean and my favorite two colors. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

10-17-2013, 12:24 AM	#72
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Crossing over, the 65 rebuild. first things first welcome down here with us 60-66 dudes and 100% on the truck you nailed it on the make over and that sub is bananas! __________________ CHEVY ONLY... Nothin Else !

10-17-2013, 10:45 AM	#73
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Crossing over, the 65 rebuild. The truck is looking great! I really like all of the subtle touches (like the tailgate) that you did on the truck. It's a ton of work for something so "stealthy", but I love that kind of stuff. It's attention to detail, and your truck nails that theme perfectly. Can't wait to see what you've got planned for the suspension. __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

10-17-2013, 01:55 PM	#75
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Crossing over, the 65 rebuild. Holy de-ja vu!!!! I liking it all!!! __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

Register or Log In To remove these advertisements.