CA Cabs Need any cuts, parts etc?! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71sierragrande · 10-14-2013, 03:38 AM

Quote:

Originally Posted by budnikguy

You want to come up? or are we talking about shipping it? $50 if you come up...figure another 25 to ship, so $75 delivered. LMK

Adam

$75 delivered sounds like a deal to me. I'll get a money order in the mail

sduckworth13 · 10-14-2013, 07:52 AM

Quote:

Originally Posted by budnikguy

Please get me exact measurements, figure around 35 shipped.....lmk

Adam

Sounds good, thanks Adam. Please send me your payment info. Thank you

*Gregg* · 10-14-2013, 07:56 AM

$45 shipped for both sides sounds good. I'll send you the measurements I need after work. Thanks!

7dee2 · 10-14-2013, 11:43 AM

Quote:

Originally Posted by budnikguy

On the RV patch pieces, I would need $60 plus Greyhound cost...depending on box size, probably 30-40 to ship. For the firewall pieces, both sides for $45 shipped depending on exact measurements. Could also ship those pieces with the other RV patches and save you some $...lmk.

Adam

That sounds great Adam. Let me get the exact measurements on the firewall patches and we can ship it all together.

Thanks,

7dee2 · 10-14-2013, 03:34 PM

Firewall is not as bad as I thought so I'll pass on that set of patches.

Can you PM me on how you want to handle the greyhound freight for pass thru patches?

Thanks,

budnikguy · 10-14-2013, 04:28 PM

PM sent...

Quote:

Originally Posted by 7dee2

Firewall is not as bad as I thought so I'll pass on that set of patches.

Can you PM me on how you want to handle the greyhound freight for pass thru patches?

Thanks,

*Gregg* · 10-14-2013, 07:23 PM

I need the passengers side 15'' across to the washer tube including the blower motor hole, 3'' wide to the windshield & all the way down. The driver side I need 12'' across to the throttle cable hole & 3" wide to the windshield & all the way down the dog leg.

*Gregg* · 10-14-2013, 07:24 PM

Driver side.

7dee2 · 10-14-2013, 07:50 PM

Quote:

Originally Posted by budnikguy

PM sent...

Payment sent for the cuts lmk on the freight.

Thanks,

budnikguy · 10-17-2013, 05:08 PM

PayPal me (personal) and I will get those cut and shipped out to you...my PayPal is:
playersnmv@aol.com

Adam

P

Quote:

Originally Posted by *Gregg*

Driver side.

budnikguy · 10-17-2013, 05:10 PM

Anyone else needing any patches...big or small?

*Gregg* · 10-17-2013, 05:20 PM

Payment sent. Thanks!

sduckworth13 · 10-17-2013, 05:24 PM

Adam how much do I owe you, I'll get you paid today. Thank you

budnikguy · 10-17-2013, 06:47 PM

$40 shipped....is a little bigger than I was originally thinking originally...

Adam

Quote:

Originally Posted by sduckworth13

Adam how much do I owe you, I'll get you paid today. Thank you

sduckworth13 · 10-17-2013, 06:52 PM

Thank you Adam

sduckworth13 · 10-17-2013, 07:08 PM

Payment sent, thanks Adam.

7dee2 · 10-18-2013, 11:44 AM

Quote:

Originally Posted by 7dee2

Payment sent for the cuts lmk on the freight.

Thanks,

Hey Adam have you made it over to Greyhound yet?

Thanks,

OldCreek · 10-18-2013, 12:06 PM

Any info on the trim and the a/c box?

Wil

budnikguy · 10-18-2013, 03:25 PM

I can help you with both..I will get pictures taken of both and post them...

Thanks
Adam

Quote:

Originally Posted by OldCreek

Any info on the trim and the a/c box?

Wil

budnikguy · 10-18-2013, 03:27 PM

aftamathe86 - your lo hump patch is cut, boxed, and will get it to the PO tomorrow or Monday.

kaphillips- your divider trim, clips, and gas cap are boxed and will get it to the PO tomorrow or Monday.

*Gregg*- Payment received. I will get the firewall pieces cut for you this weekend and have them packaged and shipped asap.

7dee2- your "RV" fill in pieces have been cut, scouring for a box big and sturdy enough to take down to Greyhound for the shipping cost quote.

sduckworth13- Payment received. I will get the floor patch cut for you this weekend and have them packaged and shipped asap.

budnikguy · 10-18-2013, 03:29 PM

update after initial cuts....

sduckworth13 · 10-18-2013, 08:04 PM

Thanks Adam for the update

1982shawn · 10-18-2013, 11:46 PM

I need this area.
http://i91.photobucket.com/albums/k3...truckside1.jpg
http://i91.photobucket.com/albums/k3...truckside2.jpg
I will need it shipped to 20748 zipcode. My drawing on the computer isnt very good, on th elower door jamb i need about 4 inches past the vertical door seam. Can you also post some pics of the drivers side exterior and floor pan, so I can see what else I could use

thanks
Shawn

7dee2 · 10-19-2013, 12:47 AM

Looks good Adam thank you for the update..

Thanks,

Hard_Rain420 · 10-19-2013, 11:19 AM

I need the area "both sides" along the seam of the floor and toe board. I also need both kick panels namely the lower portions where they're known to rot. I'll have to get measurements and pictures Monday.

10-14-2013, 07:56 AM	#53
Gregg Registered User Join Date: May 2013 Location: Pittsburgh,PA Posts: 34	Re: Cabs Need any cuts, parts etc?! $45 shipped for both sides sounds good. I'll send you the measurements I need after work. Thanks!

10-14-2013, 03:34 PM	#55
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,986	Re: Cabs Need any cuts, parts etc?! Firewall is not as bad as I thought so I'll pass on that set of patches. Can you PM me on how you want to handle the greyhound freight for pass thru patches? Thanks, __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

10-14-2013, 07:23 PM	#57
Gregg Registered User Join Date: May 2013 Location: Pittsburgh,PA Posts: 34	Re: Cabs Need any cuts, parts etc?! I need the passengers side 15'' across to the washer tube including the blower motor hole, 3'' wide to the windshield & all the way down. The driver side I need 12'' across to the throttle cable hole & 3" wide to the windshield & all the way down the dog leg. Attached Images

10-14-2013, 07:24 PM	#58
Gregg Registered User Join Date: May 2013 Location: Pittsburgh,PA Posts: 34	Re: Cabs Need any cuts, parts etc?! Driver side. Attached Images

10-17-2013, 05:10 PM	#61
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Cabs Need any cuts, parts etc?! Anyone else needing any patches...big or small?

10-17-2013, 05:20 PM	#62
Gregg Registered User Join Date: May 2013 Location: Pittsburgh,PA Posts: 34	Re: Cabs Need any cuts, parts etc?! Payment sent. Thanks!

10-17-2013, 05:24 PM	#63
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Cabs Need any cuts, parts etc?! Adam how much do I owe you, I'll get you paid today. Thank you __________________ Scott

10-17-2013, 06:52 PM	#65
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Cabs Need any cuts, parts etc?! Thank you Adam __________________ Scott

10-17-2013, 07:08 PM	#66
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Cabs Need any cuts, parts etc?! Payment sent, thanks Adam. __________________ Scott

10-18-2013, 12:06 PM	#68
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: Cabs Need any cuts, parts etc?! Any info on the trim and the a/c box? Wil __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

10-18-2013, 03:27 PM	#70
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Cabs Need any cuts, parts etc?! aftamathe86 - your lo hump patch is cut, boxed, and will get it to the PO tomorrow or Monday. kaphillips- your divider trim, clips, and gas cap are boxed and will get it to the PO tomorrow or Monday. Gregg- Payment received. I will get the firewall pieces cut for you this weekend and have them packaged and shipped asap. 7dee2- your "RV" fill in pieces have been cut, scouring for a box big and sturdy enough to take down to Greyhound for the shipping cost quote. sduckworth13- Payment received. I will get the floor patch cut for you this weekend and have them packaged and shipped asap.

10-18-2013, 03:29 PM	#71
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Cabs Need any cuts, parts etc?! update after initial cuts....

10-18-2013, 08:04 PM	#72
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Cabs Need any cuts, parts etc?! Thanks Adam for the update __________________ Scott

10-18-2013, 11:46 PM	#73
1982shawn Registered User Join Date: Aug 2013 Location: Washington D.C. Posts: 8	Re: Cabs Need any cuts, parts etc?! I need this area. http://i91.photobucket.com/albums/k3...truckside1.jpg http://i91.photobucket.com/albums/k3...truckside2.jpg I will need it shipped to 20748 zipcode. My drawing on the computer isnt very good, on th elower door jamb i need about 4 inches past the vertical door seam. Can you also post some pics of the drivers side exterior and floor pan, so I can see what else I could use thanks Shawn

10-19-2013, 12:47 AM	#74
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,986	Re: Cabs Need any cuts, parts etc?! Looks good Adam thank you for the update.. Thanks, __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2



Register or Log In To remove these advertisements.

10-19-2013, 11:19 AM	#75
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Cabs Need any cuts, parts etc?! I need the area "both sides" along the seam of the floor and toe board. I also need both kick panels namely the lower portions where they're known to rot. I'll have to get measurements and pictures Monday.

Register or Log In To remove these advertisements.