Project '67 Clone SWB

[Mr Chevorlet]

Very nice!

[JayB331]

Originally Posted by Mr Chevorlet

Very nice!

Thanks Larry. By the way, love your build. The hubcaps look awesome!

[swamp rat]

Nice to see your still around! Got a few questions.

Are you able to use stock length spark plugs with the headers you got? or do you need to run shortie plugs? if shorties do you have a brand and part number for the plug handy?

If regular length plugs can you get me a brand and part number for the headers? Any clearance issues at the frame or starter?

Was also interested to see a picture of the passenger side collector, does it extend down to the center of the frame or lower?

Thanks.

[JayB331]

I'm running Headman headers Rat, think they're #69230's. They were on the truck when I bought it. I'll look for a part number and shoot it to you this evening. I'm running stock length AC Delco plugs. Pretty sure they're the platinum version of the R45's, I'll check that this evening and I'll shoot some pictures of both collectors. The only issue I have with these headers is with the #7 and #2 plugs and with the clutch z-bar. I can't fit a plug socket on either one of them, so I have to use a 5/8" open end. It's no big deal on #2 but on #7 I have to pull it from under the truck. And the #2 plug wire boot is pretty tight against the header, but I haven't had any issues with the boot.

I had Eagle Gold headers on the '72 Blazer I had back in the late '70's and they were about the same way, had a couple of plugs that were tight fits, but nothing too terrible. The worst I've ever dealt with was a '71 454 Vette a buddy of mine had a couple of years ago that had Hooker headers on it. You literally had to install half of the plugs by hand and put an open end wrench on them after you got them finger tight.

[JayB331]

Here's' the info Swamp Rat. The headers are 69230 Headmans and the plugs are AC Delco 41-905's, basically the platinum version of the R45's. Both collectors sit at the same level, about even with the frame.

[swamp rat]

Originally Posted by JayB331

Here's' the info Swamp Rat. The headers are 69230 Headmans and the plugs are AC Delco 41-905's, basically the platinum version of the R45's. Both collectors sit at the same level, about even with the frame.

I appreciate the info, i have been thinking about getting a different set, exploring my options.