NJ Cleaning out the garage !

[71GeneralMotorsCorp]

sorry. Gonna pass. Thought they looked in better shape. Here's a bump for you.

[mx289]

Originally Posted by 71GeneralMotorsCorp

sorry. Gonna pass. Thought they looked in better shape. Here's a bump for you.

Yeah,they have seen better days.

Thanks.

[mx289]

Ttt.

[ScottH]

Hey Tom, what do u have left in radiators? Looks like the one in the 72 I'm doing is for a 6 cyl, not sure if it will be enough for a sbc.

Also any chance u have the metal fuel line from the fuel pump to 4 barrel carb?

Scott

[zicc1835]

No ..hijack here and I am actually on wifi on a plane headed to Phoenix Scott I'm running a 3 core with the 327 haven't put a thermostate in it yet she's running about 135-145 ish no shroud I'm amazed I'm gonna put a stat in when I get back just thought I'd chime in
Jess

[mx289]

That good info,thanks jess.

Enjoy the flight.


Scott,i still have all three pictured.

2 row manual
3 row auto
4 row manual

I think all need a good cleaning at the least,or to be re-cored.
They all look to be OE.

Thanks

[ScottH]

Thanks Jess, I think the one I have is a 2 row, probably the smallest made for these trucks.

Tom, rather than drag out my questions I will PM u.

Scott

[pete63]

Interested in parking brake. Do they operate free and in decent shape besides cleanup and paint? Shipping to 54610

[mx289]

Originally Posted by pete63

Interested in parking brake. Do they operate free and in decent shape besides cleanup and paint? Shipping to 54610

They do operate as should but after looking at them closer,
One has had some cracks repaired ? (Couple weld beads)
And one is kinda rusty.It would need to be blasted.

If you want them,just pay for shipping ?
Might be $15 ish to ship them to you.

[pete63]

I will take the one without the welds if it just needs to be blasted and painted to be good that's fine. Let me know info for payment. Thanks

[mx289]

Originally Posted by pete63

I will take the one without the welds if it just needs to be blasted and painted to be good that's fine. Let me know info for payment. Thanks

Sending info now thanks.

[MidLifer]

If you still have the defrost vent I will take it. Can you ma it to me? Should only take a few stamps.

[mx289]

Originally Posted by MidLifer

If you still have the defrost vent I will take it. Can you ma it to me? Should only take a few stamps.

I do,and i can mail it.

I really would like to ship it to you in a small box if thats ok with you.I would hate to see it damaged in shipping.


Or,I will be going to DE next sat so i might be passing by your area then ? Maybe we could meet up ? I will be driving down 295.

Let me know what you think.Thanks

[MidLifer]

I live pretty close to Exit 36 of 295 but if you can mail it go ahead. Send me PM for Paypal and I'll send you my address.

[zosoppp]

I might be interested in the two three-speed columns and a pair of window regulators if the might still be available.

Will the window regulators fit a 1970 with the vent windows?

I might be down at the swap meet at Raceway park at the end of this month. Perhaps we could meet up there (or afterwards)?

[greywurm]

i could be interested in a heater core, mine's been bypassed. how much to ship to 92591 for a 71 with factory air if it matters.

[mx289]

zosoppp,
I do still have those parts

The window regulators were out of a 69 or a 70 cant remember but, they will work and I would call the 2 three speed columns good for parts.
One does not have a shaft and the other the shaft is stripped.

I dont think i will be at Etown for the swap meet but, i only live 20 mins or so south of there.I'am sure we could meet up if you want.

greywurm,

Yes,they are different from the factory and yes,I do have a AC specific OE Harrison heater core out of a 71'.
It did not leak in the truck when i drove it home to part it,but thats about all i know about it.
If i were to use it,i would have it cleaned and gone through by a radiator shop.
If you wanted it,i would get it to you for $35 shipped.

Thanks.

[greywurm]

ok. i'll take the heater core and see what i can do with it. sending pm now

[kda2000]

Do you still have the 6-cyl radiator fan shroud? How much to the 78737

Thanks,
Ken

[mx289]

Originally Posted by kda2000

Do you still have the 6-cyl radiator fan shroud? How much to the 78737

Thanks,
Ken

I do still have it Ken.

How about $25 shipped to you ?

[kda2000]

Sounds good, please PM me with your payment details thanks - Ken

[mx289]

Originally Posted by kda2000

Sounds good, please PM me with your payment details thanks - Ken

Will do.

Thank you Ken.

[gmc 2500 4x4]

what shape is 4 row manual in? any dents in the tanks?

[mx289]

Originally Posted by gmc 2500 4x4

what shape is 4 row manual in? any dents in the tanks?

Hi,
It's in pretty good shape.Pretty sure its free of dents.
I will look it over closer tomorrow.

[gmc 2500 4x4]

cool, maybe you can snap a pic front/back. put me in line on it pending price/condition. zip 14063. thanx, paul