OR Volt Gauge Conversion Kits - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TBONE1964** · 01-02-2015, 10:02 PM

Quote:

Originally Posted by magwakeenercew2jh

Right. Thanks.
I didn't go far enough back.

Appreciate the pointer.

Are you good with it now or do you need more help? Yes, the photo in post #1 shows how to wire the volt gauge. You are basically using power and ground from the temp gauge which comes from the ignition switch through the pink wire.

The most important thing about this I need to stress is removing power to the circuit board for the amp gauge for those of you who still have there factory amp gauge in place.

There are several ways to do it. You can fold back the circuit board like in my photo or cut it. I would also, if you have the cluster out, remove the #1 and the #12 wires from the cluster connector and tape them off, as well as remove the (2) 4 amp fuses under the hood.

The volt gauge will work as long as it has battery voltage and a ground as shown in post one. How you get that power is up to you but piggy backing of the temp gauge is the easiest, cleanest way to do it.

Please feel free to ask any questions as they come up.

Take care,
Tom

jmking9 · 01-04-2015, 04:16 PM

Got mine put in last night! Great kit! Here's an installed picture of mine with the original amp gauge face/needle. Thanks Tom

Lee H · 01-05-2015, 02:23 PM

Tom, Installed the kit today. Very easy and straight forward. Great addition to my after market wiring harness. Nice to see the charging system working with a quick glance. This is one nice kit! Thanks, Lee

**zicc1835** · 01-05-2015, 02:47 PM

Tom
got mine in the mail over the weekend a lot going on this week have to set priorities DAMN day job getting in way ...have not yet decided which cluster to install in yet

thank you looks real easy to install

**Bgrdmoose** · 01-05-2015, 06:50 PM

I'll take one with the original gauge face.
Thanks.

**TBONE1964** · 01-05-2015, 10:13 PM

Quote:

Originally Posted by Lee H

Tom, Installed the kit today. Very easy and straight forward. Great addition to my after market wiring harness. Nice to see the charging system working with a quick glance. This is one nice kit! Thanks, Lee

Hi Lee,

Thank you very much for the purchase and the compliment. You have one of my favorite trucks on the forum here. Not to take away from others but your truck just has it going for me and I love the torque thrust D's on it.

I am glad you like the kit.

Take care,
Tom

**TBONE1964** · 01-05-2015, 10:13 PM

Quote:

Originally Posted by Bgrdmoose

I'll take one with the original gauge face.
Thanks.

I will send you a PM in 3-2-1,

Take care,
Tom

**TBONE1964** · 01-10-2015, 01:10 AM

weekend bump

I am now offering overlays to convert the stock amp gauge face to a volt gauge face. They look more like how GM would have done it if they offered a volt gauge on our trucks.

I will charge an additional $5.00 over the $65.00 kit price if anyone is interested.

I have included some photos so you can see what these overlays look like installed. I have to give credit to another member for these overlays as they come from him. To respect his privacy, I will not disclose his name but do appreciate his offering to me. If he would like to be announced, that will be up to him.

Thank you all who have purchased the conversion kits from me. Have a great weekend,

Take care,
Tom

Daddy'O · 01-13-2015, 01:45 PM

Got my kit yesterday evening. Looks great!

Thank you Tom!

**TBONE1964** · 01-13-2015, 11:06 PM

Quote:

Originally Posted by Daddy'O

Got my kit yesterday evening. Looks great!

Thank you Tom!

Thank you very much Wayne,

Hope all is well in TX,

Take care,
Tom

Lemield · 01-14-2015, 09:59 AM

Hi Tom,

I would like one with the +76 gauge face. PM on it's way.

Thanks in advance

**TBONE1964** · 01-14-2015, 11:35 AM

Quote:

Originally Posted by Lemield

Hi Tom,

I would like one with the +76 gauge face. PM on it's way.

Thanks in advance

PM returned.

Thank you,
Tom

redbaron · 01-14-2015, 12:54 PM

Hello Tom,

The volt gauge conversion showed up in the mail yesterday. Great product as always from you.

Thanks again, Mike

**TBONE1964** · 01-14-2015, 09:34 PM

Quote:

Originally Posted by redbaron

Hello Tom,

The volt gauge conversion showed up in the mail yesterday. Great product as always from you.

Thanks again, Mike

Thank you Mike,

I appreciate the kind words.

Hope all is well with you,
Take care,
Tom

Lemield · 01-21-2015, 12:51 PM

Received my gauge yesterday. Looks perfect! Gotta wait for warmer weather to install it.

Thanks a lot Tom!

imjeff · 01-21-2015, 02:09 PM

Hi Tom,

I would like one with the old face and your $5 retro add on.

Thanks,

Jeff

**Bgrdmoose** · 01-21-2015, 02:40 PM

Tom

Got mine last week, but I was out of town. Looks great!

Thanks.

**TBONE1964** · 01-22-2015, 12:34 AM

Quote:

Originally Posted by imjeff

Hi Tom,

I would like one with the old face and your $5 retro add on.

Thanks,

Jeff

Hi Jeff,

PM on the way,

Thank you very much,
Tom

**TBONE1964** · 01-22-2015, 12:35 AM

Quote:

Originally Posted by Lemield

Received my gauge yesterday. Looks perfect! Gotta wait for warmer weather to install it.

Thanks a lot Tom!

Thank you,

Glad to hear you got it and happy with it.

Take care,
Tom

**TBONE1964** · 01-22-2015, 12:36 AM

Quote:

Originally Posted by Bgrdmoose

Tom

Got mine last week, but I was out of town. Looks great!

Thanks.

Thank you sir for the kind words. I am glad you are happy with it.

Take care,
Tom

imjeff · 01-22-2015, 02:02 AM

Money sent. Let me know if you don't get paypaled! Thank you!

**TBONE1964** · 01-25-2015, 01:25 PM

Quote:

Originally Posted by imjeff

Money sent. Let me know if you don't get paypaled! Thank you!

Hi Jeff,

Your conversion will go in the mail tomorrow (Monday the 26th).

Thank you again for the business,

Take care,
Tom

**WIDESIDE72** · 01-26-2015, 04:53 PM

Please PM payment info

imjeff · 01-29-2015, 01:12 PM

I got the gauge yesterday. Exactly what I needed and very nice work. Thank you!

**TBONE1964** · 01-29-2015, 03:54 PM

Quote:

Originally Posted by WIDESIDE72

Please PM payment info

PM sent,

Thank you,
Tom

01-04-2015, 04:16 PM	#52
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: Volt Gauge Conversion Kits Got mine put in last night! Great kit! Here's an installed picture of mine with the original amp gauge face/needle. Thanks Tom Attached Images __________________ 1970 SWB Build

01-05-2015, 02:23 PM	#53
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Volt Gauge Conversion Kits Tom, Installed the kit today. Very easy and straight forward. Great addition to my after market wiring harness. Nice to see the charging system working with a quick glance. This is one nice kit! Thanks, Lee __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

01-05-2015, 02:47 PM	#54
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,302	Re: Volt Gauge Conversion Kits Tom got mine in the mail over the weekend a lot going on this week have to set priorities DAMN day job getting in way ...have not yet decided which cluster to install in yet thank you looks real easy to install __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

01-05-2015, 06:50 PM	#55
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Volt Gauge Conversion Kits I'll take one with the original gauge face. Thanks.

01-10-2015, 01:10 AM	#58
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,262	Re: Volt Gauge Conversion Kits weekend bump I am now offering overlays to convert the stock amp gauge face to a volt gauge face. They look more like how GM would have done it if they offered a volt gauge on our trucks. I will charge an additional $5.00 over the $65.00 kit price if anyone is interested. I have included some photos so you can see what these overlays look like installed. I have to give credit to another member for these overlays as they come from him. To respect his privacy, I will not disclose his name but do appreciate his offering to me. If he would like to be announced, that will be up to him. Thank you all who have purchased the conversion kits from me. Have a great weekend, Take care, Tom Attached Images __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-13-2015, 01:45 PM	#59
Daddy'O Registered User Join Date: Jan 2012 Location: Whitesboro, Texas Posts: 932	Re: Volt Gauge Conversion Kits Got my kit yesterday evening. Looks great! Thank you Tom! __________________ Cheers - Wayne Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966 '55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157 1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy" 1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55 Nothing sucks more than that moment during an argument when you realize you're wrong.

01-14-2015, 09:59 AM	#61
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Volt Gauge Conversion Kits Hi Tom, I would like one with the +76 gauge face. PM on it's way. Thanks in advance __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

01-14-2015, 12:54 PM	#63
redbaron Registered User Join Date: Mar 2008 Location: Kimberly, Id Posts: 390	Re: Volt Gauge Conversion Kits Hello Tom, The volt gauge conversion showed up in the mail yesterday. Great product as always from you. Thanks again, Mike __________________ Mike 1972 C10 Cheyenne SWB Black Supercharged Project 1972 K10 Cheyenne SWB Copper and White http://67-72chevytrucks.com/vboard/s...d.php?t=654175 1969 Camaro Protouring LS7 T-56 Project

01-21-2015, 12:51 PM	#65
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Volt Gauge Conversion Kits Received my gauge yesterday. Looks perfect! Gotta wait for warmer weather to install it. Thanks a lot Tom! __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

01-21-2015, 02:09 PM	#66
imjeff Registered User Join Date: Feb 2008 Location: Tacoma Washington Posts: 890	Re: Volt Gauge Conversion Kits Hi Tom, I would like one with the old face and your $5 retro add on. Thanks, Jeff __________________ I know a guy who's addicted to brake fluid. He says he can stop any time. 72 K10 396 75 Cj5 MPI 350 Chev 67 Chevelle 396, 4 speed 74 FXE 08 Tahoe

01-21-2015, 02:40 PM	#67
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Volt Gauge Conversion Kits Tom Got mine last week, but I was out of town. Looks great! Thanks.

01-22-2015, 02:02 AM	#71
imjeff Registered User Join Date: Feb 2008 Location: Tacoma Washington Posts: 890	Re: Volt Gauge Conversion Kits Money sent. Let me know if you don't get paypaled! Thank you! __________________ I know a guy who's addicted to brake fluid. He says he can stop any time. 72 K10 396 75 Cj5 MPI 350 Chev 67 Chevelle 396, 4 speed 74 FXE 08 Tahoe

01-26-2015, 04:53 PM	#73
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Volt Gauge Conversion Kits Please PM payment info

01-29-2015, 01:12 PM	#74
imjeff Registered User Join Date: Feb 2008 Location: Tacoma Washington Posts: 890	Re: Volt Gauge Conversion Kits I got the gauge yesterday. Exactly what I needed and very nice work. Thank you! __________________ I know a guy who's addicted to brake fluid. He says he can stop any time. 72 K10 396 75 Cj5 MPI 350 Chev 67 Chevelle 396, 4 speed 74 FXE 08 Tahoe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.