MI Parting - 1972 C10 Cheyenne - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scroff · 05-06-2015, 10:52 AM

Is that rust or dirt on the heater control face?
Thanks, Russ

**DaHos** · 05-06-2015, 11:10 AM

Quote:

Originally Posted by Scroff

Is that rust or dirt on the heater control face?
Thanks, Russ

Yes, moisture got behind the lens and made a "rust/moisture" spot. The rest is just in need of cleaning. I will include another lens and backer w sale.

Scroff · 05-06-2015, 11:13 AM

Ill take it. PM me with payment info.
Thanks, Russ

DarkFlounder · 05-06-2015, 11:55 AM

Quote:

Originally Posted by DaHos

Door is pretty rough on lower, might not be worth the shipping, Ill get some pics for you.

Thanks.

Chuck K · 05-06-2015, 12:09 PM

Payment has been sent on the seat belts. Thanks

Scroff · 05-06-2015, 02:26 PM

Quote:

Originally Posted by Scroff

Ill take it. PM me with payment info.
Thanks, Russ

Payment sent. Thank you, Russ

**First c10** · 05-06-2015, 06:02 PM

How about the 2 brackets and screws/bolts under the steering column? That hold the column to the dash? And waiting on the trim results. Thanks Scott

keh27 · 05-06-2015, 09:26 PM

do you still have the lower brake booster support bracket ? if so you know if its the short or long one? it should be less than 12inch from the end the bent i'm guess around 8 in if its the short one.

In The Ten Ring · 05-06-2015, 10:56 PM

Do you have the clips that hold the fuel sender wire (for the fuel gauge) to the top of the gas tank?

68lowburb · 05-07-2015, 12:01 AM

just let me know on upper bed trim thanks

**DaHos** · 05-07-2015, 06:41 AM

Quote:

Originally Posted by 68350

Let me know what total shipped would be on outer grill. Is it just the one spot of damage? Bumper completely cover it?

I am going to pull it from add. I mocked it up on another truck and the bumper DOES NOT cover the lip damage, very disappointing as this thing is otherwise perfect. Also w proper packaging it throws it into oversize at $140 for shipping, not worth the expense to me.....

Quote:

Originally Posted by transfromer58

how much for the vent windows? are they in good shape?

Very nice overall, v clean clear glass and chrome, lower edge of seal is a little cracked, pivots and latches work as they should. Nice "driver" condition. $100 shipped

Quote:

Originally Posted by keh27

do you still have the lower brake booster support bracket ? if so you know if its the short or long one? it should be less than 12inch from the end the bent i'm guess around 8 in if its the short one.

I do have the short bracket available $18.00 shipped

Quote:

Originally Posted by In The Ten Ring

Do you have the clips that hold the fuel sender wire (for the fuel gauge) to the top of the gas tank?

I do, $8 shipped

Quote:

Originally Posted by 68lowburb

just let me know on upper bed trim thanks

Haven't forgot yet.......

72tutone · 05-07-2015, 09:19 AM

Ill pass on the inner fender
Thanks

46stude · 05-07-2015, 10:12 AM

Upper drivers side door trim & front blinker/parking light lenses shipped to 78382?

keh27 · 05-07-2015, 10:15 AM

Quote:

Originally Posted by DaHos

I am going to pull it from add. I mocked it up on another truck and the bumper DOES NOT cover the lip damage, very disappointing as this thing is otherwise perfect. Also w proper packaging it throws it into oversize at $140 for shipping, not worth the expense to me.....

Very nice overall, v clean clear glass and chrome, lower edge of seal is a little cracked, pivots and latches work as they should. Nice "driver" condition. $100 shipped

I do have the short bracket available $18.00 shipped

I do, $8 shipped

Haven't forgot yet.......

I will take the bracket... pm payment info.

**DaHos** · 05-09-2015, 11:44 AM

All paid for items shipped this am..thx, MUCH, D'

tommys72 · 05-09-2015, 02:14 PM

Got the clips this morning Dave. Package was open, but thankfully they made it in the open package.
Thank you for the extra ziploc type bag, wouldn't have made it here without that.

Tom

eightbanger · 05-09-2015, 02:37 PM

Do you still have the PS Parklamp Housing Assembly?

yellowGT · 05-09-2015, 06:57 PM

How much for the ignition housing? I went to unplug mine from behind and the whole thing just came apart

72 blue · 05-09-2015, 11:43 PM

Hello, I am interested in a Bare passengers side Right door ....still available? Maybe a pic? Front bed panel for fleet side with steel floor ?

Shipped to 35125

Thanks

Rick jackson

72 blue · 05-09-2015, 11:49 PM

Almost forgot,,,,I'm also looking for chrome trim for tailgate 3 upper and the lower and tail lamp surrounds ....a set of Amber plain markers for front fenders....shipping to 35125

Thank you

Rick Jackson

**D.PASSMORE** · 05-10-2015, 08:10 AM

Is the bench seat available?

JustinGJ · 05-10-2015, 02:26 PM

Looking for black lower trim for a longbox, both sides behind the rear wheels. Also need small lower pieces in front of front wheels and drivers side tail light trim, you mentioned some extra trim you had lying around. Going on a patina truck, does not need to be perfect or even perfectly straight. Prices shipped to 58275?

Chuck K · 05-12-2015, 09:25 AM

Got the seat belts, thanks

drivingslow · 05-12-2015, 09:45 AM

Quote:

Originally Posted by DaHos

Yes, moisture got behind the lens and made a "rust/moisture" spot. The rest is just in need of cleaning. I will include another lens and backer w sale.

Great pup in your photo.

I am seeking one of these plastic lens with the "def air fan heat" in good condition. Since you mentioned having a spare above, sending it to the buyer of the heater unit. Perhaps you have another to mail? Just need the plastic lens, nothing else.

Thanks and best wishes.

**First c10** · 05-12-2015, 11:34 AM

I received the wiper components. Packaged well thanks!

05-06-2015, 10:52 AM	#51
Scroff Registered User Join Date: Jul 2012 Location: Colfax, WA Posts: 43	Re: Parting - 1972 C10 Cheyenne Is that rust or dirt on the heater control face? Thanks, Russ

05-06-2015, 11:13 AM	#53
Scroff Registered User Join Date: Jul 2012 Location: Colfax, WA Posts: 43	Re: Parting - 1972 C10 Cheyenne Ill take it. PM me with payment info. Thanks, Russ

05-06-2015, 12:09 PM	#55
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 160	Re: Parting - 1972 C10 Cheyenne Payment has been sent on the seat belts. Thanks

05-06-2015, 06:02 PM	#57
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Parting - 1972 C10 Cheyenne How about the 2 brackets and screws/bolts under the steering column? That hold the column to the dash? And waiting on the trim results. Thanks Scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

05-06-2015, 09:26 PM	#58
keh27 Registered User Join Date: Jul 2012 Location: franklin.tn Posts: 600	Re: Parting - 1972 C10 Cheyenne do you still have the lower brake booster support bracket ? if so you know if its the short or long one? it should be less than 12inch from the end the bent i'm guess around 8 in if its the short one. __________________ 69 step side http://67-72chevytrucks.com/vboard/s...d.php?t=613407

05-06-2015, 10:56 PM	#59
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	Re: Parting - 1972 C10 Cheyenne Do you have the clips that hold the fuel sender wire (for the fuel gauge) to the top of the gas tank?

05-07-2015, 12:01 AM	#60
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Parting - 1972 C10 Cheyenne just let me know on upper bed trim thanks

05-07-2015, 09:19 AM	#62
72tutone Registered User Join Date: May 2010 Location: St.Louis Posts: 644	Re: Parting - 1972 C10 Cheyenne Ill pass on the inner fender Thanks

05-07-2015, 10:12 AM	#63
46stude Registered User Join Date: Dec 2014 Location: Rockport, Texas Posts: 195	Re: Parting - 1972 C10 Cheyenne Upper drivers side door trim & front blinker/parking light lenses shipped to 78382?

05-09-2015, 11:44 AM	#65
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Parting - 1972 C10 Cheyenne All paid for items shipped this am..thx, MUCH, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

05-09-2015, 02:14 PM	#66
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: Parting - 1972 C10 Cheyenne Got the clips this morning Dave. Package was open, but thankfully they made it in the open package. Thank you for the extra ziploc type bag, wouldn't have made it here without that. Tom __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son

05-09-2015, 02:37 PM	#67
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Parting - 1972 C10 Cheyenne Do you still have the PS Parklamp Housing Assembly? __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

05-09-2015, 06:57 PM	#68
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Parting - 1972 C10 Cheyenne How much for the ignition housing? I went to unplug mine from behind and the whole thing just came apart __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

05-09-2015, 11:43 PM	#69
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting - 1972 C10 Cheyenne Hello, I am interested in a Bare passengers side Right door ....still available? Maybe a pic? Front bed panel for fleet side with steel floor ? Shipped to 35125 Thanks Rick jackson

05-09-2015, 11:49 PM	#70
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting - 1972 C10 Cheyenne Almost forgot,,,,I'm also looking for chrome trim for tailgate 3 upper and the lower and tail lamp surrounds ....a set of Amber plain markers for front fenders....shipping to 35125 Thank you Rick Jackson



Register or Log In To remove these advertisements.

05-10-2015, 08:10 AM	#71
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Parting - 1972 C10 Cheyenne Is the bench seat available? __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-10-2015, 02:26 PM	#72
JustinGJ Registered User Join Date: Oct 2013 Location: Reynolds, ND Posts: 18	Re: Parting - 1972 C10 Cheyenne Looking for black lower trim for a longbox, both sides behind the rear wheels. Also need small lower pieces in front of front wheels and drivers side tail light trim, you mentioned some extra trim you had lying around. Going on a patina truck, does not need to be perfect or even perfectly straight. Prices shipped to 58275? __________________ 71 C-20 Custom Deluxe 350-TH400 Blue/white standard two-tone 92 K1500 350-4L60 Blue/white two-tone

05-12-2015, 09:25 AM	#73
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 160	Re: Parting - 1972 C10 Cheyenne Got the seat belts, thanks

05-12-2015, 11:34 AM	#75
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Parting - 1972 C10 Cheyenne I received the wiper components. Packaged well thanks! __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

Register or Log In To remove these advertisements.