NC Parting Out 67 Longbed

[frednoah]

Originally Posted by waylonbud

Hello,
Thanks for the pics, fenders look good enough to make the trip. Youll have to let me know when is a good time to come by Sunday. I would like to leave here early so I could be at your place around 9-10:00 but its up to you. Also what do you need for hippy foot pedal so I know how much cash to bring with. I may bring enough to pick up that tranny too.
Thanks.

$10 for the foot fair? If you decide you want to buy the tranny too, bring $200 and I'll toss the hippy foot in for free. 9 or 10 Sunday morning will be fine by me. I'll pm you the address.

[frednoah]

Originally Posted by Savidio44

When you drop the steering column can you send me the small hoop bracket with the 2 bolts that hold it to the dash? I have the other 2 brackets but can't find the small hoop. Let me know please. Thanks

I don't see that being an issue. I'll check condition when I'm down later in the week.

[frednoah]

Originally Posted by ChevEE

Thank you for the response about the seat & dash pad. I am interested in the seat. And I will wait patiently in line for word on the dash pad. If the dash pad comes around to me, what would you want for it? Also, what kind of condition are the door panels in? How much would you want for them?

...Can you tell my interior needs some attention?

I really don't want to mess with trying to ship that dash pad. I think trying it would just end up with it getting broken in transit. If you want, I'd do $100 picked up for seat, dash pad and both door panels. The black parts of the door panels looked ok, but the chrome strip at the top shows some pitting and light rust if memory serves me correct.

Originally Posted by Hunter67stepside

Hey. Thanks. I really don't care about the cable or the lens. The main thing i need is an unbroken cable holder. Normally they are cracked around the screw hole. If this one is good you can cut the fiber cable (I have another). I also have a good lens for it. So it's all good as long as the plastic is good. Please check it and send my a price. I'd still pay $10 but you tell me what fair! Thanks

I'll get it pulled next time I'm down. Thanks.

[towbar]

Thanks for the pic of the windshield trim, definitely interested in it.
If you can find the corner piece, good..... but if not don't worry, I have a couple.
Can you confirm the trim has the deep channel that inserts into the rubber on the back side (5/8" for 67-70 I think??... 3/8" for 71 and 72).
Notice any dents or dings?
What are you asking for it?

thanks a bunch!

[frednoah]

Originally Posted by towbar

Thanks for the pic of the windshield trim, definitely interested in it.
If you can find the corner piece, good..... but if not don't worry, I have a couple.
Can you confirm the trim has the deep channel that inserts into the rubber on the back side (5/8" for 67-70 I think??... 3/8" for 71 and 72).
Notice any dents or dings?
What are you asking for it?

thanks a bunch!

I will measure tonight and confirm depth. No dents or dings that I noticed. A few light scratches, but I think they'd polish out and you'd never know they were there.

As for price, how about $20 picked up. I don't know that the curved sections would survive shipping. The long piece would be ok in a PVC tube, but the curved would have to be in a cardboard box.

[Justin@EntropyRad]

interested in it whole..and am local

[towbar]

Originally Posted by frednoah

I will measure tonight and confirm depth. No dents or dings that I noticed. A few light scratches, but I think they'd polish out and you'd never know they were there.

As for price, how about $20 picked up. I don't know that the curved sections would survive shipping. The long piece would be ok in a PVC tube, but the curved would have to be in a cardboard box.

thanks, that's price is fair enough....I agree on the shipping as well. Think pick up would be best.

When would be a good time/day for you?? how far are you off I-77?? or pm me your address and i'll look it up on mapquest

[frednoah]

Didn't make it to the truck this week, but will be down there Sunday morning to meet waylonbud.

Have a few pictures that need to be posted on the items that were left after last weeks session.

Mr Chivo






Vero67

[michael bustamante]

was that rear view mirror in the 67? i wonder if thats part of the custom cab trim?

[frednoah]

It was in the 67. I have no idea on originality.

[frednoah]

Radiator hold downs. Thinking for a 3 core radiator. They are about an inch shorter than the ones on my 69. $5 plus shipping for the set.


Hood latch $5 plus shipping



Hood hinges $15 plus shipping


Cowl Panel $20 no shipping

[Vero67]

Fred, did you have price. Was there a chrome surround on the lighter. Looks good

[frednoah]

Originally Posted by Vero67

Fred, did you have price. Was there a chrome surround on the lighter. Looks good

What you see is what was there. How about $5 plus shipping?

[Vero67]

I'll take it. Do you want to check the rear light harness before shipping , then give me a total? Thanks John

[frednoah]

I can do that. I will be down that way Sunday morning. I'll make sure to take something to lay down so I can crawl under the truck.

[Vero67]

Great thank you

[Hunter67stepside]

Hey Fred. Please don't forget to pull that shift indicator fiber cable holder when you go down Sunday. Thanks pal!

[frednoah]

Spent a little time down with the truck this morning. waylonbud came down and grabbed the fenders, trans, and hippy foot gas pedal.

Didn't accomplish all I wanted, as we got a decent little rain come through and soak the ground pretty good.

Vero67 - Rear harness was butchered. Looks like the PO "spliced in" a universal 4 wire trailer harness plug set on either end where it connects up by the firewall. I didn't both unwrapping the 5 lbs of electrical tape that was holding all of that mess together.

Hunter67stepside - Here are the parts you were asking about.

[Vero67]

Ok thank you. Just pm me a total for the lighter shipped, and I will send the payment.

[waylonbud]

Hey Fred,
It was good to visit with you Sun morn. Thanks for the parts. I didnt unload the truck until today because I was pretty wore out from the drive. Picked up a hitch and stepside bumper in Horseshoe/ Etowah area and didnt get home till 6:30. Will send you a PM also.

[Hunter67stepside]

Fred send payment info. I'll take the shift indicator parts Thanks for getting them pulled

[ChevEE]

Originally Posted by frednoah

[SIZE="5"]

ChevEE
Dash pad pictures are above. Will let you know if it makes it to you. Seat has been recovered. It is in very good shape. I couldn't find any tears or cuts in it. I think a little armorall would make it a bolt in for a driver.

Lightning hit our modem so just got back on. If seat, dash pad and door panels are still available, I will take them.

Thanks ,
Josh
Posted via Mobile Device

[cjohnson6772]

Originally Posted by frednoah

I'll check it on Friday when I'm down that way.

Any word on the rear end?

[fasttech]

I am intrested in the front grille assemebly if you still have it.

[frednoah]

Originally Posted by Hunter67stepside

Fred send payment info. I'll take the shift indicator parts Thanks for getting them pulled

PM'd you

Originally Posted by ChevEE

Lightning hit our modem so just got back on. If seat, dash pad and door panels are still available, I will take them.

Thanks ,
Josh
Posted via Mobile Device

PM'd you

Originally Posted by cjohnson6772

Any word on the rear end?

It poured down rain before I got a chance to get that far last weekend. I am 95% sure it's not a posi, but will update you as soon as I know for sure. Hopefully it will be dry this weekend.

Originally Posted by fasttech

I am intrested in the front grille assemebly if you still have it.

I've still got it. Not sure how easy it would be to ship, but willing to look into it.