GA parting 66 big window, a/c, long fleet - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 12-10-2015, 11:45 PM

If you decide to cut the cab, interested in firewall pieces on each side of tunnel, where BB valve covers would go. Will send more detailed photos if you decide to cut.

Les

Enduro55 · 12-11-2015, 05:41 PM

I'll take the windshield chrome with clips - how much total and I will make payment... Thanks

**GMCNUT** · 12-11-2015, 06:31 PM

Hey Woody - I could use a 4 flu automatic radiator if this truck has one or you have another one - I could actually use two of them now that I think of it. Same goes for the upper and lower 4 flu brackets like Rickonner was wanting.

Let me know what you have in terms of radiators and upper brackets if Rickonner ends up getting the lowers - shipping would be to Arab AL 35016

Thanks Steve

**southern parts** · 12-11-2015, 11:46 PM

sharkskinman - wheel pics - $100 plus shipping is bottom dollar

jmader - $300 for the bare sides , they have some body filler and several coats of paint. some pitting at the seam between the upper and lower pieces. the drivers side has some blistering at the wheel well support and in front of the wheel well. pics.

sick5 - I will try to get the gun rack into the mail tomorrow , if not than on Monday.

rckoner - going to sell them as a set . maybe you and GMCNUT can work something out.

aotte1 - I will let tyou know if I cut up the cab.

Enduro55 - I will get a total for you tomorrow.

GMCNUT - Hey Steve , I didn`t get the radiator with it . going to sale the radiator brackets as a set. a stated above maybe you and rickoner can work something out.

**southern parts** · 12-11-2015, 11:47 PM

more bed pics

**southern parts** · 12-11-2015, 11:50 PM

and a few more

**GMCNUT** · 12-12-2015, 11:10 AM

Quote:

Originally Posted by southern parts

rckoner - going to sell them as a set . maybe you and GMCNUT can work something out.

GMCNUT - Hey Steve , I didn`t get the radiator with it . going to sale the radiator brackets as a set. a stated above maybe you and rickoner can work something out.

OK - I need all 3 of them really, so I will take the set if its not stepping on Rickonners' toes - PM payment info and I'll get it sent your way

**southern parts** · 12-18-2015, 01:07 PM

GMCNUT , Enduro55 , Your parts shipped this morning
the a/c is out , here`s a few pics.

NVS-C10 · 12-18-2015, 02:26 PM

Since you're breaking up the bed and selling the bedsides, are you willing to sell the in bed spare tire holder, backup lights, tail lights, or bed side trim?

I asked before but you were going to keep the bed together then.

Thanks,

Nicky

**southern parts** · 12-18-2015, 05:01 PM

yes I will , but only after the bed sides sell.

NVS-C10 · 12-18-2015, 07:55 PM

Quote:

Originally Posted by southern parts

yes I will , but only after the bed sides sell.

Cool thanks!

jamesrussell26 · 12-20-2015, 01:12 AM

received dash cluster, better looking in person than in the pics thank you

Cypher · 12-20-2015, 01:15 AM

How much for the choke cable carburetor bracket?

**southern parts** · 12-20-2015, 08:26 AM

Cypher - It sold with the choke cable.

62 bigwindow · 12-20-2015, 07:17 PM

still firm on the AC parts????

**southern parts** · 12-20-2015, 07:57 PM

I`ll listen to an offer. the worst I can do is say no.

USMilitary · 12-20-2015, 10:49 PM

PM sent

USMilitary · 12-21-2015, 12:23 PM

I'll take the a/c parts. PM sent.

jmader · 12-21-2015, 06:06 PM

I will pass on the bedsides. Thank you.

**southern parts** · 12-21-2015, 10:36 PM

A/C is sold to USMilitary

**southern parts** · 01-04-2016, 01:10 PM

ttt

sharkskinman · 01-04-2016, 02:13 PM

Knobs for wiper,lights,choke?

**southern parts** · 01-05-2016, 07:53 PM

sorry , they are already sold.

mjavelar · 01-06-2016, 12:23 AM

HI is the hood still available? What shape is it in?
What about the rear wheel housings?

urmyboyblue · 01-07-2016, 08:47 PM

I cannot tell from the pictures. Are there holes thru the bed sides at the seams? Or is that where the paint has chipped and the metal rusted?

12-10-2015, 11:45 PM	#51
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: parting 66 big window, a/c, long fleet If you decide to cut the cab, interested in firewall pieces on each side of tunnel, where BB valve covers would go. Will send more detailed photos if you decide to cut. Les Attached Images

12-11-2015, 05:41 PM	#52
Enduro55 Registered User Join Date: Jul 2014 Location: Michigan Posts: 69	Re: parting 66 big window, a/c, long fleet I'll take the windshield chrome with clips - how much total and I will make payment... Thanks

12-11-2015, 06:31 PM	#53
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: parting 66 big window, a/c, long fleet Hey Woody - I could use a 4 flu automatic radiator if this truck has one or you have another one - I could actually use two of them now that I think of it. Same goes for the upper and lower 4 flu brackets like Rickonner was wanting. Let me know what you have in terms of radiators and upper brackets if Rickonner ends up getting the lowers - shipping would be to Arab AL 35016 Thanks Steve __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

12-11-2015, 11:46 PM	#54
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet sharkskinman - wheel pics - $100 plus shipping is bottom dollar jmader - $300 for the bare sides , they have some body filler and several coats of paint. some pitting at the seam between the upper and lower pieces. the drivers side has some blistering at the wheel well support and in front of the wheel well. pics. sick5 - I will try to get the gun rack into the mail tomorrow , if not than on Monday. rckoner - going to sell them as a set . maybe you and GMCNUT can work something out. aotte1 - I will let tyou know if I cut up the cab. Enduro55 - I will get a total for you tomorrow. GMCNUT - Hey Steve , I didn`t get the radiator with it . going to sale the radiator brackets as a set. a stated above maybe you and rickoner can work something out. Attached Images

12-11-2015, 11:47 PM	#55
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet more bed pics Attached Images

12-11-2015, 11:50 PM	#56
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet and a few more Attached Images

12-18-2015, 01:07 PM	#58
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet GMCNUT , Enduro55 , Your parts shipped this morning the a/c is out , here`s a few pics. Attached Images

12-18-2015, 02:26 PM	#59
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: parting 66 big window, a/c, long fleet Since you're breaking up the bed and selling the bedsides, are you willing to sell the in bed spare tire holder, backup lights, tail lights, or bed side trim? I asked before but you were going to keep the bed together then. Thanks, Nicky

12-18-2015, 05:01 PM	#60
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet yes I will , but only after the bed sides sell.

12-20-2015, 01:12 AM	#62
jamesrussell26 Registered User Join Date: Sep 2012 Location: jackson,tn Posts: 188	Re: parting 66 big window, a/c, long fleet received dash cluster, better looking in person than in the pics thank you

12-20-2015, 01:15 AM	#63
Cypher Registered User Join Date: Jul 2015 Location: Arleta Ca. Posts: 44	Re: parting 66 big window, a/c, long fleet How much for the choke cable carburetor bracket?

12-20-2015, 08:26 AM	#64
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet Cypher - It sold with the choke cable.

12-20-2015, 07:17 PM	#65
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: parting 66 big window, a/c, long fleet still firm on the AC parts????

12-20-2015, 07:57 PM	#66
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet I`ll listen to an offer. the worst I can do is say no.

12-20-2015, 10:49 PM	#67
USMilitary Registered User Join Date: Apr 2013 Location: Barksdale AFB, LA Posts: 387	Re: parting 66 big window, a/c, long fleet PM sent



Register or Log In To remove these advertisements.

12-21-2015, 12:23 PM	#68
USMilitary Registered User Join Date: Apr 2013 Location: Barksdale AFB, LA Posts: 387	Re: parting 66 big window, a/c, long fleet I'll take the a/c parts. PM sent.

12-21-2015, 06:06 PM	#69
jmader Registered User Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: parting 66 big window, a/c, long fleet I will pass on the bedsides. Thank you. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-21-2015, 10:36 PM	#70
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet A/C is sold to USMilitary

01-04-2016, 01:10 PM	#71
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet ttt

01-04-2016, 02:13 PM	#72
sharkskinman Registered User Join Date: Oct 2014 Location: new orleans Posts: 302	Re: parting 66 big window, a/c, long fleet Knobs for wiper,lights,choke?

01-05-2016, 07:53 PM	#73
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: parting 66 big window, a/c, long fleet sorry , they are already sold.

01-06-2016, 12:23 AM	#74
mjavelar Registered User Join Date: Jan 2012 Location: Jacksonville, Fl Posts: 15	Re: parting 66 big window, a/c, long fleet HI is the hood still available? What shape is it in? What about the rear wheel housings?

01-07-2016, 08:47 PM	#75
urmyboyblue Registered User Join Date: Feb 2015 Location: Montevallo, AL Posts: 272	Re: parting 66 big window, a/c, long fleet I cannot tell from the pictures. Are there holes thru the bed sides at the seams? Or is that where the paint has chipped and the metal rusted?

Register or Log In To remove these advertisements.