PA Parting out 72 Blazer

[JimH2828]

Interested in below pending pics and price...

heat stove and riser
4x4 dipstick and tube
horns
tow hitch

Thanks
Jim

[blap]

Shipping on the column to 06010 thanks for keeping me in mind!!

[1rippen6]

Originally Posted by chevypoint

Thank, I'll pass.

No problem thanks for letting me know

Originally Posted by craneboy72

Payment sent for rear lenses

Received will box up tonight should ship out tomorrow

Originally Posted by JimH2828

Interested in below pending pics and price...

heat stove and riser
4x4 dipstick and tube
horns
tow hitch

Thanks
Jim

Engine possibly sold complete will let you know if something changes. I will have to check the horn and get you pictures of the hitch.

Originally Posted by blap

Shipping on the column to 06010 thanks for keeping me in mind!!

It is black will get you a quote ASAP

[bluek5]

Originally Posted by 1rippen6

Gravel shield are rough probably fixable but don't know if it is worth 20 plus shipping if interested let me know

I think I will pass on them for now. Are you going to cut up the frame? If so I may be interested in the last 6" of the rear frame horns. Maybe we could do a package deal.
Thanks, Paul

[dutchmanz]

Originally Posted by 1rippen6

Let me look in my stash and will let you know.

Sounds good. I just need some driver quality. I have fronts in saddle tan but no rear belts except for some newer ones that are not the correct style.

[1rippen6]

Originally Posted by blap

Shipping on the column to 06010 thanks for keeping me in mind!!

Steering column is black I took pictures look at the beginning of the thread 22 shipped let me know

[1rippen6]

Originally Posted by bluek5

I think I will pass on them for now. Are you going to cut up the frame? If so I may be interested in the last 6" of the rear frame horns. Maybe we could do a package deal.
Thanks, Paul

PM sent on frame horns

[1rippen6]

Originally Posted by dutchmanz

Sounds good. I just need some driver quality. I have fronts in saddle tan but no rear belts except for some newer ones that are not the correct style.

I have a set drivers quality at best the back male belts are the problem. If you give me a couple days to look around I may be able to find better back belts. Do you want to keep you saddle? Instead of a bunch of communication in the thread I will pm you my email address.

[tjsblazer]

Originally Posted by 1rippen6

Seat hold down is sold with seat brackets

Front bumper is OE does have a bend under the DS light but I think it is very fixable let me know if still interested

Seat belts in this one are not original may have what you need but will have to dig it out.

I took a picture of the firewall not sure which clips you are talking about

Rubber gaskets 10 for the pair the round one was glued on so small pieces come off when removing it from the filler neck.

Transmission arms splines look good bushings on stems look good and the bronze bushings look good. 20

Just realized what you where asking for wiring harness I have some loose how many do you need will post a picture so we are on the same page.

Plus shipping on prices

Dwayne I will pass on the Fr Bumper.

The other items are pretty much same condition as what I have so I will refurbish my own.

For W/H clips. I need 2 of the picture you posted for the Frame rail if the rust can be media blasted off and they will survive.

The other W/H clips would be a bolt on J style that hold the Rear taillight harness in the tunnel area. Similar to what I think is bolted to the lower Pkb bolt in your firewall picture. Do you have any of those that will blast up and survive.

[1rippen6]

Originally Posted by tjsblazer

Dwayne I will pass on the Fr Bumper.

The other items are pretty much same condition as what I have so I will refurbish my own.

For W/H clips. I need 2 of the picture you posted for the Frame rail if the rust can be media blasted off and they will survive.

The other W/H clips would be a bolt on J style that hold the Rear taillight harness in the tunnel area. Similar to what I think is bolted to the lower Pkb bolt in your firewall picture. Do you have any of those that will blast up and survive.

I will look for the other clips now that have a better idea. I should have 2 decent ones of the pictured one.

[1972K20]

Interested in the following:

-Leaf springs and steering arm. Are the springs stock and what's the condition? Shipping may keep a deal from happening, but I'm interested.
-The transfer case shiftier with knob. What condition is the knob in?
-What's the price on the front bumper with the brackets?

My shipping zip is 36830 if that helps, thanks

[Luis_gz06]

Looking for hardware for tailgate seal strips and fuel filler neck screws?

[1rippen6]

Originally Posted by 1972K20

Interested in the following:

-Leaf springs and steering arm. Are the springs stock and what's the condition? Shipping may keep a deal from happening, but I'm interested.
-The transfer case shiftier with knob. What condition is the knob in?
-What's the price on the front bumper with the brackets?

My shipping zip is 36830 if that helps, thanks

I'm not parting the frame right now may be sold
I will get pictures and prices this evening on other items

Originally Posted by Luis_gz06

Looking for hardware for tailgate seal strips and fuel filler neck screws?

Will look tonight and let you know.

[dozerbill72]

Any word on the fuel filler cover?
Thanks,,Bill

[1rippen6]

Originally Posted by dozerbill72

Any word on the fuel filler cover?
Thanks,,Bill

Removed it tonight I am not home right now and haven't figured out how to load pictures with my phone.

[dozerbill72]

Originally Posted by 1rippen6

Removed it tonight I am not home right now and haven't figured out how to load pictures with my phone.

Thats fine, I'm just persistent and sometimes annoying. I wanted to make sure you didn't forget.

Thanks ,,,Bill

[1rippen6]

Originally Posted by dozerbill72

Thats fine, I'm just persistent and sometimes annoying. I wanted to make sure you didn't forget.

Thanks ,,,Bill

Cover is in nice shape 60 plus shipping let me know if interested

[too much stuff]

Did all of the top hold downs sell?

[hybridchevy71]

Dwayne payment it's on the way for both the driver and passenger seat brackets. I will take the power steering frame section if you end up cutting the frame let me know if you do. Thank you. How's the windshield frame interested on aswell

[1rippen6]

Originally Posted by hybridchevy71

Dwayne payment it's on the way for both the driver and passenger seat brackets. I will take the power steering frame section if you end up cutting the frame let me know if you do. Thank you. How's the windshield frame interested on aswell

Hector sent you a pm

[1rippen6]

Originally Posted by too much stuff

Did all of the top hold downs sell?

Still available 55 shipped picture in post 39

[dozerbill72]

Originally Posted by 1rippen6

Cover is in nice shape 60 plus shipping let me know if interested

Sounds great, shipping to 46001. Let me know and I will get you paid.
Thanks,,, Bill

[1rippen6]

Originally Posted by Luis_gz06

Looking for hardware for tailgate seal strips and fuel filler neck screws?

Here's what I have 17 shipped in a small flat rate box.

[1rippen6]

filler screws

[1rippen6]

Originally Posted by 1972K20

Interested in the following:

-Leaf springs and steering arm. Are the springs stock and what's the condition? Shipping may keep a deal from happening, but I'm interested.
-The transfer case shiftier with knob. What condition is the knob in?
-What's the price on the front bumper with the brackets?

My shipping zip is 36830 if that helps, thanks

Transfer case shifter and knob, knob does not have any plier marks does need a good cleaning please look at pictures 60 plus shipping

Front bumper 80 brackets 50 plus shipping if still interested will get shipping quote on parts

PICTURES NEXT POST SORRY ABOUT THAT